Printing on Custom-sized Paper Loaded on the Bypass Tray

After registering the custom size in the printer driver, you can select the registered custom size from [Document Size:] on the Print Settings screen. You need not enter the paper size each time.

1. On [Devices and Printers], right-click the icon of the printer to use, and then click [Printer properties].

2. Click the [Advanced Options] tab, and then click [Register Custom Paper Size...].

3. Select the setting item in which to register the custom size from [Custom Paper Size List: (Name/Measurement Unit/Width/Length)].

4. Enter the name of the custom size and its values, and then click [Modify].

5. Click [OK] [Apply].
   After registering the custom size, you can select it from [Document Size:] of the printer driver.

You can specify a registered custom size or enter a custom size that is not registered.

1. Load paper into the bypass tray with the print side facing down.

   Loading Paper into the Paper Tray

2. Open a document to print on the computer, and display the setting screen of the printer driver from the print menu in the application.

3. Specify Paper Type, Orientation, and other settings.
   Basic Procedure for Printing Documents

4. In [Input Tray:], select [Bypass Tray].

5. In [Document Size:], specify the paper size.
   

   • When using a custom size paper that was registered in [Printer Properties], select the custom size in [Document Size:].

   • To specify a custom size that is not registered, click [Custom Paper Size...] and then enter the paper size. After entering the value, click [OK]. [Document Size:] is changed to [Custom Paper Size].

6. After completing the configuration, click [OK] to print.
   The machine prints the document on the paper of the paper size and type specified in the printer driver.
   After printing is completed, the paper size setting is restored to the previous values.

1. Load paper into the bypass tray with the print side facing down.

   Loading Paper into the Paper Tray

2. Open a document to print on the computer, and display the setting screen of the printer driver from the print menu in the application.

3. Specify Orientation, Paper Type, and other settings.
   Basic Procedure for Printing Documents

4. In [Paper Feed] menu, select [Bypass Tray] from "All Pages From".

5. In "Paper Size", select [Manage Custom Sizes...].

6. On the custom size management screen, click [] and register the custom size.
   Configure the following settings:
   

   • Untitled: Enter the name to register the custom size.

   • Width, Height: Enter width and height of the paper loaded in the bypass tray.
     

   • Margins: Select the name of the printer to use.

   • Top, Bottom, Left, Right: Fill in with values for the driver's margins.

7. Click [OK].

8. After completing the configuration, click [Print] to print.
   The machine prints the document with the paper size and paper type specified in the printer driver.
   After completing the print, the paper size setting restores the previous contents.