Setting the Sound Volume and Type

You can set the sound generated when you operate the machine or an error occurs.

1. Press [Settings] on the Home screen.
   

2. Press [System Settings].

   

3. Press [Sound] [Volume].

4. Adjust the sound volume using the slide bar.
   Move the slider on the bar to the right to increase the volume.
   

5. Press [OK].

6. To change the sound type, press the item to change.
   You can set the items below.

   Item	Description	Sound Type
   Touch/Notification Sound	Sound when you press the screen	No Sound /Sound of Beep/Sound of Tap 1-4
   Invalid Operation Sound	Sound for inactive operation	No Sound /Sound of Beep/Sound of Invalid 1-2
   Operation Completed Sound	Sound when the procedure ends	No Sound /Sound of Beep/Sound of Completed 1-3
   Copy: Job Done Sound	Sound when copy ends	No Sound /Sound of Beep/Sound of Completed 1-3
   Fax Printing Ended Sound	Sound when fax printing ends	No Sound /Sound of Beep/Sound of Completed 1-3
   Fax Transmission Ended Sound	Sound when fax transmission ends	No Sound /Sound of Beep/Sound of Transmission Completed 1-3
   Fax Reception Ended Sound	Sound when fax reception ends	No Sound /Sound of Beep/Sound of Reception Completed 1-4
   Login Sound	Sound for logging in	No Sound /Sound of Beep/Sound of Login 1-2
   Logout Sound	Sound for logging out	No Sound /Sound of Beep/Sound of Logout 1-2
   Warm-up Sound	Sound when warming-up of the machine is completed	No Sound /Sound of Beep/Sound of Warm-up 1-2
   Auto Reset Sound	Sound when the machine is not operated for a specified period of time	No Sound /Sound of Beep/Sound of Reset 1-2
   Caution Sound	Sound when an error occurs	No Sound /Sound of Beep/Sound of Alert 1-3
   Copy: Forgot Original Sound	Sound when the original for copy is remaining in the machine	No Sound /Sound of Beep/Sound of Alert 1-3
   Scanner: Forgot Original Sound	Sound when the original for scan is remaining in the machine	No Sound /Sound of Beep/Sound of Alert 1-3
   Fax: Forgot Original Sound	Sound when the original for fax is remaining in the machine	No Sound /Sound of Beep/Sound of Alert 1-3
   Warning Sound	Sound when an error occurs and a process is interrupted	No Sound /Sound of Beep/Sound of Error 1-3
   Blank Page Detected Sound	Sound when the scanned original is blank	No Sound /Sound of Beep/Sound of Blank Page Detected 1-3
   Adjust Sound Volume (Fax)	Adjusts the sound for faxes	Adjusts the sound for faxes Sound for "On Hook Mode", "At Transmission", "At Reception" and "At Dialing" can be adjusted.

7. Select the sound type.
   

8. Press [OK].

9. After completing the procedure, press [Home] ().

1. Press [Settings] on the Home screen.
   

2. Press [Fax Settings].

   

3. Press [Others] [Adjust Sound Volume].

4. Adjust the volume of an item by the slide bar.

   

   On Hook Mode: Sound when you press [On Hook]
   At Transmission: Sound when you send a fax
   At Reception: Sound when you receive a fax
   At Dialing: Sound generated between pressing [Start] and connecting to the destination fax

   • Press [Check Sound Volume] to hear the sound volume at the adjusted volume.

5. Press [OK].

6. After completing the procedure, press [Home] ().