This section describes the settings in [List/Test Print] under [Printer Settings].
How to Use the "Settings"
The paper is fed from the tray in which A4 (or 81/2 × 11) plain paper / recycled paper is set.
If the specified paper is not set in the tray, the paper is fed from the tray specified by [Tray/Paper Settings] 
[Paper Tray Priority] [Paper Tray Priority: Printer].
Setting Items |
Description |
|
|
You can print the configuration page and error log. |
|
|
You can print the machine's current values of the Printer Settings. Printing the Configuration Page |
|
|
You can print error logs for the 30 most recent errors that occurred during printing. The error logs of jobs canceled are also printed. Error logs older than the 30 most recent jobs are deleted and not printed. However, if the oldest error belongs to Sample Print, Locked Print, Hold Print, or Stored Print, it is not deleted. Instead, it will be stored separately up to 30. |
Section Top
Setting Items |
Description |
|
|
You can print the current configuration and installed PCL font list. |
|
|
You can print the current configuration and installed PostScript font list. |
|
|
You can print the current configuration and installed PDF font list. |
Section Top
Setting Items |
Description |
|
|
The machine prints a sheet to check that the colors (C, M, Y, and K) can be printed properly. |
Section Top
Setting Items |
Description |
|
|
The machine enters the mode to print hexadecimal data sent from the computer (Hex Dump mode). Use this function to determine how a printing error occurred. |
Section Top
Setting Items |
Description |
Side(s) to Print of List/Test Print
|
Specify the side (1 Sided/2 Sided) for test printing.
|
Section Top
