Copying in the Center of the Output Paper

When you copy the reduced image on a paper of the same size as the original or the image on a paper larger than the original, you can place it in the center of the output paper (Centering). You can make the margins equal for a well-balanced finish.

When the original size cannot be detected properly on the exposure glass or in the ADF for Centering, specify the paper to use or paper size manually on the Copy screen. For the original size detected on the exposure glass or in the ADF automatically, see the following section:

Sizes Detectable with Auto Paper Select

1. Press [Copy] on the Home screen.
   

2. Press [Centering] on the Copy screen.
   
   If the key is not found, select it from [Edit/Color].

3. Specify Paper Select or Copy Ratio as necessary.
   Basic Procedure for Copying Documents
   Making Enlarged or Reduced Copies

4. Place the original.
   Basic Procedure for Copying Documents
   When the original orientation and the paper orientation do not match, the copied image is not rotated by 90 degrees and may become trimmed.

5. Press [Start].