List of Parameter Settings
Do not change the bit values that are not listed in the table.
Switch number |
Bit number |
Function to be configured |
Current value |
|---|---|---|---|
|
02 |
0 |
Printing the Forwarding Mark |
|
02 |
3 |
Printing the Sender Information |
|
03 |
0 |
Printing the Communication Result Report automatically |
|
03 |
2 |
Printing the Memory Storage Report automatically |
|
03 |
3 |
Printing the SEP Code RX Reserve Report automatically (This setting is valid only when [Fax (Classic)] is used.) |
0: Do not print (Default) 1: Print |
03 |
4 |
Printing the SEP Code RX Result Report automatically (This setting is valid only when [Fax (Classic)] is used.) |
0: Do not print 1: Print (Default) |
03 |
5 |
Printing the Immediate TX Result Report automatically |
|
03 |
7 |
Printing the records automatically |
0: Do not print 1: Print (Default) |
04 |
0 |
Printing the Confidential File Report automatically |
0: Do not print 1: Print (Default) Receiving Faxes to Personal BoxesTransferring Received Fax Documents to Another Fax Destination |
04 |
1 |
Automatically printing Communication Failure Report and SUB Code Transfer Report |
0: Do not print 1: Print (Default) |
04 |
4 |
Showing the destination name in various reports |
0: Do not show 1: Show (Default) Viewing the Transmission Result of Sent Faxes |
04 |
5 |
Displaying the user name in various reports or list |
0: Do not show 1: Show (Default) Viewing the Transmission Result of Sent Faxes Viewing the History of Sent and Received Faxes |
04 |
7 |
Adding the original image to various reports or list |
0: Do not add 1: Add (Default) |
05 |
0 |
Receive Service Call (SC) Condition (Substitute Reception during service call) |
0: Perform Substitute Reception 1: Do not receive (Default) Various Methods for Receiving Faxes |
05 |
2, 1 |
Performing Substitute Reception when paper or toner is exhausted or all paper trays are malfunctioning and a document cannot be printed |
00: Perform Substitute Reception unconditionally 01: Perform Substitute Reception when receiving the sender name (for display) or sender fax number (Default) 10: Perform Substitute Reception when the ID matches the Closed Network Code 11: Do not receive incoming calls |
05 |
5 |
Printing only on paper of the first priority |
0: Off (Default) 1: On |
05 |
7 |
Submitting an alert when paper in any of the paper trays runs out |
0: Off (Default) 1: On |
06 |
0 |
Priority given to the information shown under "Destination" in the records, the Immediate TX Result Report, and on the Transmission File Status screen for fax transmission |
0: Gives priority to the destination machine's information Priority is given to the information in the following order:
1: Gives priority to the Address Book information (Default) Priority is given to the information in the following order:
Viewing the Transmission Result of Sent Faxes Viewing the History of Sent and Received Faxes |
06 |
1 |
Specifying whether or not G3-1 communication conforms to Super G3 |
0: Off 1: On (Default) |
|
06 |
2 |
Specifying whether or not G3-2 communication conforms to Super G3 |
0: Off 1: On (Default) |
|
06 |
3 |
Specifying whether or not G3-3 communication conforms to Super G3 |
0: Off 1: On (Default) |
07 |
2 |
Parallel Memory Transmission |
0: Off 1: On (Default) |
08 |
1 |
Specifying whether to accept or reject incoming faxes from unregistered users |
0: Accept (Default) 1: Reject |
10 |
0 |
Restricting operation on the stored reception documents from the control panel |
0: Do not restrict (Default) 1: Restrict Storing the Received Fax Documents in the Machine |
10 |
1 |
Combine Print |
0: Do not combine (Default) 1: Combine |
|
10 |
3 |
Page reduction when printing |
0: Off (Default) 1: On |
10 |
6 |
Using both e-mail notification and printed reports to confirm the transmission result |
0: Off (Default) 1: Print |
|
10 |
7 |
Handling of the received document when a document storage error occurs |
0: Print and delete the received document (Default) 1: Delete the document after printing the report |
11 |
2 |
Detecting a blank original |
0: Off 1: On (Default) |
11 |
5 |
Storing or printing documents successfully forwarded by [Register Special Sender] |
0: Do not store or print (Default) 1: Perform either Store or Print
Specifying the Action to Perform When Receiving a Fax from Different Senders |
14 |
0 |
Printing documents received while in the Sleep mode |
0: Print immediately (Default) 1: Print when recovered from the Sleep mode |
14 |
3 |
Resetting the settings when switching the function |
0: Do not reset (Default) 1: Reset |
15 |
2, 1, 0 |
Specifying the paper tray to use when the paper source tray is set |
001: Tray 1 (Default) 010: Tray 2 011: Tray 3 100: Tray 4 101: Large Capacity Tray |
15 |
5 |
Set paper tray |
0: On 1: Off (Default) |
17 |
2 |
Preventing transmission to the wrong destination when performing Broadcast Transmission |
0: Do not require pressing [Add] when adding a destination (Default) 1: Require pressing [Add] when adding a destination |
17 |
3 |
Resetting the settings after scanning the original |
0: Reset (Default) 1: Do not reset |
|
17 |
7 |
Receiving a fax manually by pressing [Start] in manual reception or fax information service |
|
18 |
0 |
Printing the sender name (for print) and date |
0: Do not print 1: Print (Default) |
18 |
1 |
Printing Fax Header (for print) |
0: Do not print 1: Print (Default) |
18 |
2 |
Printing Fax Header (for print) and document number |
0: Do not print 1: Print (Default) |
18 |
3 |
Printing Fax Header (for print) and page number |
0: Do not print 1: Print (Default) |
|
19 |
0 |
Function to shift the ejected sheets |
|
19 |
1 |
Sorting records by line type |
|
20 |
0 |
Printing the LAN-Fax Result Report automatically |
0: Do not print (Default) 1: Print |
20 |
5, 4, 3, 2 |
Time to retain the document that could not be printed from the LAN-Fax driver for reprinting |
0000: 0 minutes - 1111: 15 minutes
|
21 |
0 |
Print conditions for a reception confirmation e-mail |
0: Print when an error occurs (Default) 1: Print all Confirming the Reception of an Internet Fax at the Destination |
21 |
1 |
Responding to Reception Confirmation of an e-mail reception document |
0: Do not respond 1: Respond (Default) Various Methods for Receiving Faxes |
21 |
2 |
Printing the JPEG/PDF file attached to an e-mail |
0: Do not print 1: Print (Default) |
21 |
3 |
The file format in which to send a document when an e-mail or folder destination is specified as the destination of Forwarding, Backup File Transmission, receiver of Personal Box, or end receiver for Transfer Box |
0: TIFF (Default) 1: PDF Transferring Received Fax Documents to Another Fax DestinationTransferring a Received Fax Document to E-mail Address or Folder |
|
21 |
4 |
Sending records by e-mail |
|
21 |
5 |
Suppressing the output of the text data (subject, message) when receiving a normal mail (TIFF file attached) |
0: Do not suppress (Default) 1: Suppress |
21 |
6 |
Displaying a warning for a network error |
0: Show (Default) 1: Do not show |
21 |
7 |
Sending the e-mail reception error to the sender of the notification e-mail |
0: Send (Default) 1: Do not send When an Error Is Reported in a Report or E-mail |
22 |
0 |
Detecting the dial tone before sending a fax when initiating a call on the G3-1 line |
0: Send even when not detected 1: Do not send if not detected (Default) |
|
22 |
1 |
Detecting the dial tone before sending a fax when initiating a call on the G3-2 line |
0: Send even when not detected 1: Do not send if not detected (Default) |
|
22 |
2 |
Detecting the dial tone before sending a fax when initiating a call on the G3-3 line |
0: Send even when not detected 1: Do not send if not detected (Default) |
24 |
0 |
Retaining an unsent fax in the memory |
0: Do not store (Default) 1: Store |
24 |
1 |
Duration to retain an unsent fax in the memory |
0: 24 hours (Default) 1: 72 hours
|
24 |
2 |
Retaining the stored sent document in Document Box |
0: Off (Default) 1: On
|
32 |
0 |
Destination to give priority when a destination of the destination type specified for Forwarding, Forwarding per Sender, or as the destination for Personal Box, do not exist in a case in which more than one destination type is registered in the address book |
0: Paper priority IP-Fax destination has the highest priority, followed by fax destination, Internet fax destination, e-mail destination and folder destination. 1: Electronic media priority (Default) Internet fax destination has the highest priority, followed by e-mail destination, folder destination, IP-Fax destination, and fax destination. Transferring Received Fax Documents to Another Fax DestinationTransferring a Received Fax Document to E-mail Address or Folder Specifying the Action to Perform When Receiving a Fax from Different Senders |
|
32 |
4 |
Distributing the document received to the G3-1 line |
|
|
32 |
5 |
Distributing the document received to the G3-2 line |
|
|
32 |
6 |
Distributing the document received to the G3-3 line |
|
34 |
0 |
Using the Gatekeeper in IP-Fax |
0: Do not use (Default) 1: Use |
34 |
1 |
Using the SIP server in IP-Fax |
0: Do not use (Default) 1: Use |
35 |
7, 6, 5, 4, 3, 2, 1, 0 |
Redial interval when sending a backup file |
00000000: 0 minutes - 11111111: 255 minutes
|
36 |
7, 6, 5, 4, 3, 2, 1, 0 |
Total number of calls initiated when performing Backup File Transmission (number of retries) |
00000000/00000001: 1 times - 11111110/11111111: 254 times
|
37 |
0 |
Performing printing an error report and the backup file forcefully when the number of destinations exceeds the maximum while:
|
0: Do not process (Default) 1: Process |
37 |
3, 2 |
Printing the backup data in the TX communication failure report when the backup transmission fails |
00: Do not print 01: Print only the first page 10: Print all pages (Default) |
37 |
4 |
Quoting the sender information in the file name when transferring a received document to a folder destination |
0: Do not quote (Default) 1: Quote Transferring a Received Fax Document to E-mail Address or Folder |
37 |
5 |
Limiting usable characters in the file name when transferring a received document to an older destination |
0: Do not restrict (Default) 1: Restrict Transferring a Received Fax Document to E-mail Address or Folder |
|
37 |
6 |
Playing a sound after printing a received document on the sub-machine when using the Remote Fax function |
0: Play (Default) (play the sound according to the [Sound] setting in [System Settings]) 1: Do not play the sound |
38 |
7, 6, 5, 4, 3, 2, 1, 0 |
Total number of calls initiated when sending a document that could not be sent to a folder destination by Forwarding or Forwarding per Sender |
00000000/00000001: 1 times - 11111110/11111111: 254 times
Transferring a Received Fax Document to E-mail Address or Folder Specifying the Action to Perform When Receiving a Fax from Different Senders |
39 |
7, 6, 5, 4, 3, 2, 1, 0 |
Interval (minutes) of redialing performed when sending a document that could not be sent to a folder destination by Forwarding or Forwarding per Sender |
00000001: 1 minutes - 11111111: 255 minutes
Transferring a Received Fax Document to E-mail Address or Folder Specifying the Action to Perform When Receiving a Fax from Different Senders |
|
40 |
0 |
Receiving documents when the received document storage error occurs |
0: Print and delete the oldest received document before receiving a document (Default) 1: Do not receive |
40 |
1 |
Displaying the folder path or e-mail address in the destination field of the transmission history when sending or forwarding a document to a destination registered in the address book |
0: Off (Default) 1: On |
45 |
2 |
The file format in which to send a document when an e-mail or folder destination is specified as the destination of Forwarding, Backup File Transmission, receiver of Personal Box, or receiving station of Transfer Box |
0: PDF (Default) 1: PDF/A
Transferring Received Fax Documents to Another Fax Destination |
45 |
3 |
Printing and/or storing of a document when transferring the document to all destinations by Forwarding |
0: Follow the setting in Reception File Settings (Default) 1: Do not print/store
Transferring Received Fax Documents to Another Fax Destination |
45 |
5, 4 |
File format for the image file attached to transmission result e-mails |
00: TIFF (Default) 01: PDF 11: PDF/A
|
46 |
3 |
Function to detect whether the line has been disconnected |
0: Disable (Default) 1: Enable
|
[Action on Receiving File]. The machine behaves as specified when any other settings are specified in these items.