Finishing

Rotate Sort: Auto Paper Continue

You can specify whether the machine continues copying using the paper set in another paper tray when paper of the required orientation runs out during rotate sort.

• Default: [Off]

Memory Full Auto Scan Restart

When the memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals.

When you specify [On], all pages are copied and separately sorted into two halves according to the output timing of scanning.

When you specify [Off], the machine stops operation. Remove the first copy pages, and you can avoid sorting the first half pages and second half pages separately.

• Default: [Off]

Stapleless Position

(This setting item appears only when a finisher with the stapleless stapling capability is installed, and valid only when [Copier (Classic)] is used.)

You can specify which stapleless position to display on the initial screen of the Copier function.

• Default: [Slant]

Staple Position

(This setting item is valid only when [Copier (Classic)] is used.)

You can specify which staple-type key to display on the initial screen of the Copier function. You can specify up to four staple types. The types of staple differ depending on the finisher attached.

Punch Type

(This setting item is valid only when the [Copier (Classic)] is used.)

You can specify which punch-type key to display on the initial screen of the Copier function.

When 2 & 4 hole punch unit is installed:

• Default
  

  • Punch 1: [Left 2]

  • Punch 2: [Top 2]

When 2 & 3 hole punch unit is installed:

• Default
  

  • Punch 1: [Left 3]

  • Punch 2: [Top 3]

When 4 hole punch unit is installed:

• Default
  

  • Punch 1: [Left 4]

  • Punch 2: [Top 4]

Z-fold/Half Fold Output Tray Settings

Specify the tray to which Z/half folded paper is delivered.

• Default
  

  • When Booklet Finisher SR3330 or Finisher SR3320 is installed: [Finisher Upper Tray]

  • When Booklet Finisher SR3350 or Finisher SR3340 is installed: [Finisher Shift Tray]

Select Output Tray for Letter Fold

Specify the tray to which letter-folded paper is delivered.

• Default: [Folding Unit Tray]

Half Fold

Specify the fold orientation and print side for half fold.

• Default
  

  • Fold Orientation: [Right - Left]

  • Print Side: [Inside]

Folding Copied Sheets

Letter Fold-out

Specify the fold and page opening direction for Letter Fold-out.

• Default
  

  • Fold Orientation: [Right - Left]

  • Open Orientation: [Open to Right]

  • Multi-sheet Fold: [Off]

Folding Copied Sheets

Letter Fold-in

Specify the fold and page opening direction and print side for Letter Fold-in.

• Default
  

  • Fold Orientation: [Right - Left]

  • Open Orientation: [Open to Right]

  • Print Side: [Outside]

  • Multi-sheet Fold: [Off]

Folding Copied Sheets

If Too Many Sheets for Multi-sheet Fold, Set

Specify whether to continue or cancel printing when the number of pages in a document exceeds the maximum number for multi-sheet folding.

• Continue Printing
  Printing continues while pages are folded at the maximum number for multi-sheet folding.

• Cancel Printing
  An error message is displayed and printing stops.

• Suspend (Display Alert Screen)
  An alert screen is displayed to prompt you to continue or stop printing.

• Default: [Suspend (Display Alert Screen)]