Scan (Scanner Settings)

Setting Items	Description
Auto Color Select Sensitivity Level	When [Auto Color Select] is specified in [Send Settings] on the Scanner screen, select one of five levels of sensitivity for identifying whether originals are black-and-white or color. The lower the level is, the easier the scanner can identify black and white originals; the higher the level is, the easier the scanner can identify color originals. Default: (the level in the center among five levels)
Background Density of ADS (Full Color)	Specify the degree of removing the background color from five levels when scanning a magazine or newspaper and removing the background color. Default: (the level in the center among five levels)

Setting Items

Description

Auto Color Select Sensitivity Level

When [Auto Color Select] is specified in [Send Settings] on the Scanner screen, select one of five levels of sensitivity for identifying whether originals are black-and-white or color. The lower the level is, the easier the scanner can identify black and white originals; the higher the level is, the easier the scanner can identify color originals.

Default: (the level in the center among five levels)

Background Density of ADS (Full Color)

Specify the degree of removing the background color from five levels when scanning a magazine or newspaper and removing the background color.

Default: (the level in the center among five levels)

Section Top

Size/Reduce/Enlarge

Setting Items	Description
Program/Edit/Delete Scan Size	Register, change, or delete the size displayed in [Send Settings] [Scan Size] [Programmed Size] on the Scanner screen. You can register up to five settings.
Scan Ratio Setting	Specify the scaling ratio displayed in [Send Settings] [Scan Ratio] on the Scanner screen. You can specify a ratio between 25-400%.
Mixed Sizes Mode (This setting item appears only when the one-pass duplex scanning ADF is installed.)	Setting Select whether to scan sheets of the same width or mixed sheets of different widths. Default: [Same Width Originals]

Section Top

Blank Page Detection

Setting Items	Description
Blank Page Detection	Specify the setting to display a warning message and cancel scanning when the first page scanned in an original is blank. This setting is only valid when placing the original in the ADF. Default: [On]
Blank Page Detection Level	Specify the sensitivity to detect a blank page. Default: (the level in the center among seven levels)
OCR Scanned PDF Blank Page Sensitivity (This setting item appears when an OCR unit is installed on the machine.)	Specify the level of detecting blank pages when creating a text embedded PDF from five levels. In Sensitivity Level 1, only a page that is completely white is detected as blank. In Sensitivity Level 5, a page is detected as blank even when some smears or dust appear on the page. Default: (the second level from the left among five levels)

Setting Items

Description

Blank Page Detection

Specify the setting to display a warning message and cancel scanning when the first page scanned in an original is blank. This setting is only valid when placing the original in the ADF.

Default: [On]

Blank Page Detection Level

Specify the sensitivity to detect a blank page.

Default: (the level in the center among seven levels)

OCR Scanned PDF Blank Page Sensitivity

(This setting item appears when an OCR unit is installed on the machine.)

Specify the level of detecting blank pages when creating a text embedded PDF from five levels. In Sensitivity Level 1, only a page that is completely white is detected as blank. In Sensitivity Level 5, a page is detected as blank even when some smears or dust appear on the page.

Default: (the second level from the left among five levels)

Section Top

Timer Settings

Setting Items	Description
Wait Time for Next Original(s): Exposure Glass	Specify the time to wait after scanning a page before starting scanning of the next page when scanning an original with multiple pages on the exposure glass and sending the scanned images together. Continuous Wait The machine waits for the next original to be placed until you press [Finish Scn]. No time limit is imposed. Off Transmission starts automatically after scanning a single page in an original. Set Wait Time Specify the time to wait for the next original to be placed (3-999 seconds) in [Wait Time for Next Original(s)]. Transmission starts automatically after the specified time elapses. The machine pauses counting down of the waiting time and waits until [Finish Scn] is pressed in the following cases: When you change the scan condition or other setting When you open the upper cover of the ADF When you press [Interrupt] and perform copying operation When a paper jam occurs This setting is invalid when [SADF] or [Batch] is selected in [Send Settings] on the Scanner screen. Default: [Set Wait Time], [60] second(s) Combining the Data of Multiple Scans into a Single File
Wait Time for Next Original(s): SADF	Specify the time to wait after scanning a stack of a multi-page original before starting scanning of the next stack when scanning an original with multiple pages in the ADF and sending the scanned images together. Continuous Wait The machine waits for the next original to be placed until you press [Finish Scn]. No time limit is imposed. Set Wait Time Specify the time to wait for the next original to be placed (3-999 seconds) in [Wait Time for Next Original(s)]. Transmission starts automatically after the specified time elapses. The machine pauses counting down of the waiting time and waits until [Finish Scn] is pressed in the following cases: When you change the scan condition or other setting When you open the upper cover of the ADF When you press [Interrupt] and perform copying operation When a paper jam occurs This setting is only invalid when [SADF] is selected in [Send Settings] on the Scanner screen. Default: [Set Wait Time], [60] second(s) Combining the Data of Multiple Scans into a Single File
PC Scan Command Standby Time	Select whether to accept the instruction to perform scanning that is sent from a computer when a user is performing operation in the Scanner function on the control panel. On The machine does not accept the instruction to perform scanning from a computer until the time specified in [Standby Time] (3-30 seconds) elapses after an operation on the control panel has finished. Off The machine accepts the instruction to perform scanning from a computer even when a user is performing operation in the Scanner function on the control panel. Default: [On], [10] second(s)

Section Top