Date/Time/Timer

Daylight Saving Time

Specify the period and time for daylight saving.

(mainly Europe)

• Default: [Active]

(mainly Asia)/(Taiwan)

• Default: [Inactive]

(mainly North America)

• Default: [Active]

• Start Time/End Time
  Specify Month, Week, Day of the Week, Time to start/end the daylight saving time.

• • Default of Month
    (mainly Europe)
    

    • Start Time: [March]

    • End Time: [October]

    (mainly North America)
    

    • Start Time: [March]

    • End Time: [November]

  • Default of Week
    (mainly Europe)
    

    • Start Time: (Final week)

    • End Time: (Final week)

    (mainly North America)
    

    • Start Time: [2nd]

    • End Time: [1st]

  • Default of Day of the Week: [Sunday]

  • Default of Time
    (mainly Europe)
    

    • Start Time: [00]

    • End Time: [01]

    (mainly North America)
    

    • Start Time: [02]

    • End Time: [02]

Set Date

Set Time

Set the date and time for the machine's internal clock.

(mainly Europe and Asia)/(Taiwan)

Enter the time using the 24-hour format.

(mainly North America)

Enter the time using the 12-hour format.

Time Zone

Specify the standard time in the region where the machine is used.

(mainly Europe)

• Default: [GMT+01:00]

(mainly Asia)

• Default: [GMT+08:00]

(Korea)

• Default: [GMT+09:00]

(mainly North America)

• Default: [GMT-05:00]

(Taiwan)

• Default: [GMT+08:00]

Sleep Mode Timer

Specify the time to wait before entering Sleep mode for power saving.

• Default: [1] minute(s)

When quick card authentication is enabled, the machine does not enter Sleep mode regardless of this setting.

Preparation for Quick Card Authentication Setting

Fusing Unit Off Mode (Energy Saving) On/Off

Specify whether to enable Fusing Unit Off mode when no operations are in progress for a certain period.

• Default: [On]

When you select [On], specify the following items:

• Exit Fusing Unit Off Mode
  Specify when to exit Fusing Unit Off mode

• • On Printing

  • On Operating Control Panel

    If the Copier function screen is displayed, the machine exits Fusing Unit Off mode regardless of this setting.

• Fusing Unit Off Mode Timer
  Specify the time that the machine enters the Fusing Unit Off mode.

System Auto Reset Timer

Specify the time to automatically switch the screen to the Home screen when no operations are in progress for a certain period. You can specify the screen other than the Home screen by [Display/Input] [Display] [Function Priority (Default Displayed Application)].

• Default: [On], [60] second(s)

Copier/Document Server Auto Reset Timer

Fax Auto Reset Timer

Printer Auto Reset Timer

Scanner Auto Reset Timer

Auto Logout Timer

Specify the time to automatically log out when no operations are in progress for certain period.

• Default: [On], [180] second(s)

Specifying the Period of Time Until the Machine Logs You Out Automatically

System Status/Job List Display Time

Specify whether to hide the screen displayed by pressing [Check Status] automatically. You can specify the display time.

• Default: [On], [15] second(s)

Displayed Application Switchover Timer

Specify when to switch the screen if an event occurs in a different application because there have been no key inputs for a certain period of time on the application screen.
• Default: [Set Time], [3] second(s)

Weekly Timer Detailed Settings

Specify whether to activate or inactivate the weekly timer.

• Default: [Inactive]

When you activate the timer, specify time when the machine switches to and from Off mode or Sleep mode daily or for Monday through Sunday.

You can set up to six timer settings a day or for Monday through Sunday and specify the following items:

• Weekly Timer Code Settings
  Specify whether to enable the weekly timer code. When you enable the code, specify a password (up to eight digits) for when the machine recovers from Off mode or Sleep mode.

• Weekly Timer Schedule
  Specify event, such as Enter Sleep Mode, Cancel Weekly Timer Code, or Main Power Off or On, and the day or day of the week to perform it.

  (mainly Europe and Asia)/(Taiwan)

  Enter the time using the 24-hour format.
  (mainly North America)
  Enter the time using the 12-hour format.

• Main Power On Timer Suspension Period
  Specify the period to disable the timer to turn the main power On (the year change period). To use the machine after this period, turn the main power switch On manually.

To use this setting, activate Administrator Authentication.

Activating Administrator Authentication

Weekly Timer Easy Settings

When you specify the schedule of the weekly timer only, you can use the timer only by specifying this setting. If a day of the week and time is set here, [Weekly Timer Schedule] under [Weekly Timer Detailed Settings] is activated and the setting overwrites the schedule of the selected day.

(mainly Europe and Asia)/(Taiwan)

Enter the time using the 24-hour format.

(mainly North America)

Enter the time using the 12-hour format.

To use this setting, activate Administrator Authentication.

Activating Administrator Authentication