Binding Printed Sheets

The machine cannot fold or saddle stitch the printed pages. After printing originals using the magazine function, fold and saddle stitch the printed pages by hand.

Magazine

Arrange four original pages as shown below and print them on a sheet. Stack all printed sheets and fold them in half to arrange the pages in the order of the page numbers.

Staple the stacked sheets in the center to finish as a booklet.

Magazine and Combine

You can arrange multiple pages of originals on a page of a bound book printed by specifying Magazine.

Cover sheet

You can insert front and back cover sheets in the printed sheets. Paper for the cover sheet is fed from a different tray from that of the main paper. You can use paper of a different quality for the cover sheet.

• The cover sheet function is available on the Windows printer driver.

• The first to second pages and the last page of a document can be printed as the cover sheets.

• You can insert a blank cover sheet.

Half fold

The printed sheets can be folded in half.

You can finish printed sheets as a book with double-page spreads when combining Half fold with Magazine of Binding.

• To fold printed sheets in half, attach the booklet finisher to the machine.

• See the section below for details about paper size, paper weight, or number of sheets that can be folded in half.
  List of Specifications

• You cannot use the following types of paper for Half fold:
  

  • Label Paper

  • Coated Paper (Glossy)

  • Coated Paper (Matte)

  • Envelopes

Configure the settings on the [Basic] tab.

1. Open a document to print on the computer, and display the setting screen of the printer driver from the print menu in the application.

2. Specify Document Size, Paper Type, Orientation and other settings.
   Basic Procedure for Printing Documents

3. In the [Basic] tab, select [Magazine] from [Booklet:].

4. After completing the configuration, click [OK] to print.

Configure the settings on the [Finishing] menu in "Feature Sets" of [Printer Features].

1. Open a document to print on the computer, and display the setting screen of the printer driver from the print menu in the application.

2. Specify Paper Size, Orientation, Paper Type, and other settings.
   Basic Procedure for Printing Documents

3. From "Booklet" in [Finishing] of "Feature Sets" select the opening direction of the bound paper.
   Configure the following settings:
   

   • Booklet: Select the opening direction of the bound booklet.

   • Booklet - Paper Size: Specify the paper size to use for Booklet.

4. After completing the configuration, click [Print] to print.

Configure the settings on the [Cover/Chapter] tab.

1. Load the paper to use as cover sheets into the paper tray.
   Loading Paper into the Paper Tray
   Use a paper tray other than the one for printing the document. Load paper of the same size in the same orientation as the document.

2. On the Home screen, press [Settings].
   

3. On the Settings screen, press [Tray/Paper Settings].
   

4. Press [Common Settings/Others] [Cover Sheet Tray] to display the cover sheet tray setting screen.
   
   Configure the following settings on the [Cover Sheet Tray] screen.
   

   • Tray to Register: Select the tray loaded with the paper for cover sheet.

   • Display Time: Select [Full Time] if you always use the selected paper tray to load cover sheet paper when you use the Copy function. Select [At Mode Selected] if you use the selected paper tray to load cover sheet paper only when the cover sheet function is specified.

   • Apply Duplex: To print on both sides of a cover sheet, select [Yes].

5. Press [OK].

6. After completing the configuration, press [Home] ().

7. Open a document to print on the computer, and display the setting screen of the printer driver from the print menu in the application.

8. Specify Document Size, Paper Type, Orientation and other settings to print the document.
   Basic Procedure for Printing Documents

9. Configure the settings of the cover sheet on the [Cover/Chapter] tab.
   Configure the following setting:
   

   • Front Cover/Back Cover: Select the paper tray specified on the control panel, and then specify whether to print on the cover sheet.

10. After completing the configuration, click [OK] to print.