When a Scanned Document Is Not Sent as Expected

Note

When confirming or changing the settings in [Settings], press [Home] () after closing [Settings].

When a Document Cannot Be Sent Properly by Send to Folder

Condition	Cause	Solution and reference
The data scanned using Scan to Folder can temporarily not be sent.	Network adapter is turned off when the computer goes to sleep.	Configure the network adapter not to turn off.
	There is a problem with the network cable connected to the computer or the machine.	Try another network cable.
	The IP address specified for the computer is also specified for another computer.	Consult the network administrator (or custom-privileges administrator who has equivalent privilege).
"Scanner records are full. Cannot send the scanned data." is displayed and the scanner function cannot be used.	[Do not Print: Disable Send] is specified in [Print & Delete Scanner Records].	Specify [Do not Print: Delete Oldest] in [Settings] [Scanner Settings] [Others] [History Settings] [Print & Delete Scanner Records].
You cannot search network when specifying the destination folder.	IP Address and "Subnet Mask" of the machine are not configured correctly.	Specify the correct IP address and subnet mask in [Settings] [System Settings] [Network/Interface].
	The setting in [SMB Work Group] is not specified correctly on the machine.	Check that the work group name or domain name specified on the destination computer match the setting in [SMB Work Group] on [Settings] [System Settings] [Network/Interface] [SMB].
[Enter Using Keyboard] or [Add/Edit Address Book] is not displayed.	You are not allowed to use those items by the settings in [Extended Security Settings].	Consult the user administrator (or custom-privileges administrator who has equivalent privilege). The user administrator can change the settings in [Settings] [System Settings] [Settings for Administrator] [Security] [Extended Security Settings]. Preventing Information Leaks by Sending Data to a Wrong Destination
Data is not sent to the destination folder.	You do not have permission to access the shared folder specified as the destination.	Check the access permission settings of the shared folder on the destination computer. Scanning Documents and Sending the Scanned Data to a Folder

When a Document Cannot Be Sent Properly by Send Email

Condition	Cause	Solution and reference
[Enter Using Keyboard] or [Add/Edit Address Book] is not displayed.	You are not allowed to use those items by the settings in [Extended Security Settings].	Consult the user administrator (or custom-privileges administrator who has equivalent privilege). The user administrator can change the settings in [Settings] [System Settings] [Settings for Administrator] [Security] [Extended Security Settings]. Preventing Information Leaks by Sending Data to a Wrong Destination
A broadcast transmission is sent in two separate transmissions when more than one destination is specified.	The specified destinations include destinations specified with or without S/MIME authentication.	The machine sends an encrypted e-mail and normal e-mail separately.
When you append a signature to an e-mail using S/MIME, the e-mail address specified as [Sender] is not specified in the "From" field.	This behavior is specified in the specifications of the machine when S/MIME is enabled.	When S/MIME is enabled, [Sender] is specified as "Reply-to" and the machine administrator is specified in "From".
Restoration of the divided e-mails is not supported at the destination, and the recipient cannot restore the original file.	The cause varies depending on the computer environment.	Decrease the resolution in [Send Settings] [Resolution] so that the file size of the scanned image does not exceed the maximum value specified in [Maximum Email Size]. Increase the value specified in [Maximum Email Size] within the range allowed on the SMTP server or specify [No] or [Yes (per Page)] in [Divide & Send Email] in [Settings] [Scanner Settings] [Sending Settings] [Email (Size)]. If the recipient can use another e-mail client, forward and receive the divided e-mails in a different e-mail client, and restore the original file.
The Web browser does not start when the recipient clicks the URL in the sent e-mail, and the document cannot be displayed.	The cause varies depending on the computer environment.	Perform the operation again. If the document still cannot be displayed, copy the URL and paste it in the address bar of the Web browser.

x

QR Code