Replacing the Toner

You can view the procedure to replace the toner by watching a movie that is displayed on the control panel.

Contact Information

Important

  • Replace the toner after the message prompting replacement is displayed on the control panel.

  • The machine may become damaged if you use toner of a different type.

  • Do not turn off the power of the machine when replacing the toner. If you turn off the power when replenishing the toner, the specified settings are canceled, and printing will not resume afterwards.

  • Store the toner in a dry environment away from direct sunlight and generally under the temperature below 35°C.

  • Keep the toner horizontal when storing it.

  • After removing the print cartridge from the machine, do not shake it while its opening is facing downward. The remaining toner may spill out.

  • After removing the print cartridge, do not touch the interior of the machine.

  • Do not pull out and put back the print cartridge repeatedly. The remaining toner may leak.

  • Follow the procedure displayed on the screen to replenish the toner.

  1. Press [Watch Video].
    Operation panel screen illustration
    Press [Check Status] and then press [Check] under [Machine Status] tab.

  2. Press the play (Operation panel screen illustration) key.

  3. Replace the toner by following the procedure shown in the video.

Note

  • You can transmit data in the fax or scanner function even after the toner runs out. However, you cannot transmit a fax when the number of times of reception and transmission performed in the fax function after the toner has run out and the number of times of communication not recorded in the Records exceeds a total of 1,000. Replace the toner earlier.

  • While the message prompting you to replace the toner is displayed, Memory Storage Report for Memory Transmission will not be printed.

  • If appears when there is a lot of toner, hold the cartridge with the opening upward, shake it well, and then reinstall it.

x

QR Code