List of Parameter Settings

Do not change the bit values that are not listed in the table.

Switch number	Bit number	Function to be configured	Current value
02	3	Printing the Sender Information	0: Do not print (Default) 1: Print Printing a Mark or Information on the Received Fax
03	0	Printing the Communication Result Report automatically	0: Do not print (Default) 1: Print Viewing the History of Sent and Received Faxes
03	7	Printing the records automatically	0: Do not print 1: Print (Default) Viewing the History of Sent and Received Faxes
04	1	Automatically printing Communication Failure Report	0: Do not print 1: Print (Default) Viewing the Transmission Result of Sent Faxes
04	4	Showing the destination name in various reports	0: Do not show 1: Show (Default) Viewing the Transmission Result of Sent Faxes Viewing the History of Sent and Received Faxes When an Error Is Reported in a Report
04	5	Displaying the user name in various reports or list	0: Do not show 1: Show (Default) Viewing the Transmission Result of Sent Faxes Viewing the History of Sent and Received Faxes Confirming and Handling a Document in the Fax Queue When an Error Is Reported in a Report
04	7	Adding the original image to various reports or list	0: Do not add 1: Add (Default) Viewing the Transmission Result of Sent Faxes Viewing the History of Sent and Received Faxes
05	0	Receive Service Call (SC) Condition (Substitute Reception during service call)	0: Perform Substitute Reception 1: Do not receive (Default) Various Methods for Receiving Faxes
05	2, 1	Performing Substitute Reception when paper or toner is exhausted or all paper trays are malfunctioning and a document cannot be printed	00: Perform Substitute Reception unconditionally 01: Perform Substitute Reception when receiving the sender name (for display) or sender fax number (Default) 10: Perform Substitute Reception when the ID matches the Closed Network Code 11: Do not receive incoming calls Various Methods for Receiving Faxes
05	5	Printing only on paper of the first priority	0: Off (Default) 1: On Specifying the Printing Method of the Received Fax Document
05	7	Submitting an alert when paper in any of the paper trays runs out	0: Off (Default) 1: On When a Message Appears While Using the Fax Function
06	0	The order of information shown under "Destination" in the Records, the Immediate TX Result Report, and on the Transmission File Status screen	0: Gives priority to the destination machine's information Priority 1. Name registered in the destination machine 2. Fax number registered in the destination machine 3. Name registered in the Address Book 4. Entered fax number 1: Gives priority to the Address Book information (Default) Priority 1. Name registered in the Address Book 2. Entered fax number 3. Name registered in the destination machine 4. Fax number registered in the destination machine Viewing the History of Sent and Received Faxes
06	1	G3-1 communication conforms to Super G3	0: Off 1: On (Default)
07	2	Parallel Memory Transmission	0: Off 1: On (Default)
10	1	Combine Print	0: Do not combine (Default) 1: Combine Specifying the Printing Method of the Received Fax Document
10	3	Reduced print	0: Off (Default) 1: On Specifying the Printing Method of the Received Fax Document
11	2	Detecting a blank original	0: Off 1: On (Default) Setting an Original to Send by Fax on the Scanner
14	0	Printing documents received while in the Sleep mode	0: Print immediately (Default) 1: Print when recovered from the Sleep mode
14	1	Scanning long originals	0: Off (Default) 1: On
14	3	Resetting the settings when switching the function	0: Do not reset (Default) 1: Reset
17	1	Prohibiting Broadcast transmission	0: Do not prohibit (Default) 1: Prohibit Preventing a Fax Transmission to the Wrong Destination
17	2	Preventing transmission to the wrong destination when performing Broadcast Transmission	0: Do not require pressing [Add] when adding a destination (Default) 1: Require pressing [Add] when adding a destination Preventing a Fax Transmission to the Wrong Destination
17	3	Resetting the settings after scanning the original	0: Reset (Default) 1: Do not reset
17	4	Displaying the destination confirmation screen after pressing [Start]	0: Do not display (Default) 1: Display Preventing a Fax Transmission to the Wrong Destination
17	7	Receiving a fax manually by pressing [Start] in manual reception or fax information service	0: Do not receive 1: Receive (Default) Answering a Phone Call on the Machine
18	0	Printing the sender name (for print) and date	0: Do not print 1: Print (Default) Printing the Fax Header on the Fax Received at the Destination
18	1	Printing Fax Header (for print)	0: Do not print 1: Print (Default) Printing the Fax Header on the Fax Received at the Destination
18	2	Printing Fax Header (for print) and document number	0: Do not print 1: Print (Default) Printing the Fax Header on the Fax Received at the Destination
18	3	Printing Fax Header (for print) and page number	0: Do not print 1: Print (Default) Printing the Fax Header on the Fax Received at the Destination
19	1	Sorting records by line type	0: Off (Default) 1: On Viewing the History of Sent and Received Faxes
21	3	The file format in which to send a document when an e-mail or folder destination is specified as the destination of Forwarding or Backup File Transmission	0: TIFF (Default) 1: PDF Transferring Received Fax Documents to Another Fax Destination Transferring a Received Fax Document to E-mail Address or Folder
21	6	Displaying a warning for a network error	0: Show (Default) 1: Do not show When a Message Appears While Using the Fax Function
22	0	Detecting the dial tone before sending a fax when initiating a call on the G3-1 line	0: Send even when not detected 1: Do not send if not detected (Default)
22	3	Allow the use of On Hook dialing when Enter Destination Multiple Times is enabled	0: Do not allow (Default) 1: Allow Preventing a Fax Transmission to the Wrong Destination
22	7, 6, 5, 4	Entering a destination repeatedly	0000: Off (Default) 0001 (1 time) - 1111 (15 times) Specify the number of times of confirmation in binary, e.g., “0010” for entering the same fax number twice after entering it manually (a total of three times). Preventing a Fax Transmission to the Wrong Destination
24	0	Retaining an unsent fax in the memory	0: Do not store (Default) 1: Store Resending an Unsent Fax Document
24	1	Duration to retain an unsent fax in the memory	0: 24 hours (Default) 1: 72 hours This setting value is valid when the bit number 0 of the switch number 24 is set to [1] (Store). Resending an Unsent Fax Document
32	0	Destination to give priority when a destination of the destination type specified for Forwarding or Forwarding per Sender, do not exist in a case in which more than one destination type is registered in the Address Book	0: Paper priority Fax destination has the highest priority, followed by e-mail destination and folder destination. 1: Electronic media priority (Default) E-mail destination has the highest priority, followed by folder destination, and fax destination. Transferring Received Fax Documents to Another Fax Destination Transferring a Received Fax Document to E-mail Address or Folder
37	4	Quoting the sender information in the file name when transferring a received document to a folder destination	0: Do not quote (Default) 1: Quote Transferring a Received Fax Document to E-mail Address or Folder
37	5	Limiting usable characters in the file name when transferring a received document to a folder destination	0: Do not restrict (Default) 1: Restrict Transferring a Received Fax Document to E-mail Address or Folder
37	7	Selecting outside line or inside line for the destination	0: Outside line (Default) 1: Inside line
38	7, 6, 5, 4, 3, 2, 1, 0	Total number of calls initiated when sending a document that could not be sent to a folder destination by Forwarding or Forwarding per Sender	00000000/00000001: 1 times - 11111110/11111111: 254 times Default: 10010000 (144 times) Transferring a Received Fax Document to E-mail Address or Folder
39	7, 6, 5, 4, 3, 2, 1, 0	Interval (minutes) of redialing performed when sending a document that could not be sent to a folder destination by Forwarding or Forwarding per Sender	00000001: 1 minutes - 11111111: 255 minutes Default: 00011110 (30 minute) Transferring a Received Fax Document to E-mail Address or Folder
40	1	Displaying the folder path or e-mail address in the destination field of the transmission history when sending or forwarding a document to a destination registered in the Address Book	0: On (Default) 1: Off
45	3	Printing and/or storing of a document when transferring the document to all destinations by Forwarding	0: Follow the setting in Reception File Settings (Default) 1: Do not print/store Select [1] (Do not print/store) if not printing or storing a document that has been transferred normally even when [On] is specified in [Print] or [Store] in [Action on Receiving File] under [Reception File Settings]. Transferring Received Fax Documents to Another Fax Destination
46	3	Periodically check the line being disconnected on the G3-1 line	0: Disable (Default) 1: Enable This bit number is set to [0] (Disable) by default, but the setting changes automatically to [1] (Enable) after you send or receive a fax even once. If the setting changes automatically to [1] (Enable) and you then change it back to [0] (Disable), the setting will not change automatically to [1] (Enable) thereafter.
46	7	Notification for turning on the rotating warning light after completing a fax reception	0: Off (Default) 1: On The factory default setting is Off, but the setting changes automatically to [On] after you send or receive a fax even once. If the setting changes automatically to On and you then change it to Off, the setting will not change automatically to [On] thereafter.