Maintenance

This section describes the settings in [Maintenance].

Setting Items	Description
Auto Color Calibration	When printed colors appear tinted or different from the colors in the original, you can restore the previous color calibration setting or execute Auto Color Calibration. When Printed Colors Appear Differently
Color Registration	When a deviation in color registration appears, you can execute Color Registration. When a Deviation in Color Registration Appears
Adjust Image Density	You can adjust the image density. Default: (Middle of five adjustment levels) Adjusting Image Density
Adjust Print Position	You can adjust the print position for each tray. Default: [0.0] mm Adjusting Print Position
Intermediate Transfer Unit Cleaning	The machine starts cleaning the Intermediate Transfer Unit. Intermediate Transfer Unit Cleaning
Adjust Fusing Temperature	You can adjust the fusing temperature. Default: [0] °C Adjusting Fusing Temperature
Paper Blocking Mode	You can print at the slow transport speed to prevent the sheets from sticking together in the finisher tray. Default: [Inactive] Paper Blocking Mode
Altitude Adjustment	When the machine is operated in an environment at high altitude, such as mountain areas, you can adjust the voltage at which images are printed. Default: [Off] Altitude Adjustment
Adjust Transfer Voltage	You can correct for dots or white spot that appear on the printed paper. Default: [0] V Adjusting Transfer Voltage
Development Unit and Paper Transfer Roller Cleaning	The machine cleans the Development Unit and Paper Transfer Unit while the printer is not being operated. Development Unit and Paper Transfer Roller Cleaning