Copying onto Tab Stock
For details about the optional units required for this function, see the following section:
Functions Requiring Optional Configurations
The Duplex function cannot be used with tab stock. If the Duplex function is specified, press [1 sided 2 sided:TtoT] to cancel the setting.
Loading tab stock into Trays 2 and 3
Load the tab stock with the side to be copied facing down. For details about how to load tab stock on paper trays, see the following section:
Loading Paper into the Paper Tray
Tab stock is fed starting from the top tab.
Originals
Tab Stock
Copies
Loading tab stock into the bypass tray or wide LCT
Load the tab stock with the side to be copied facing up. For details about how to load tab stock, see the following sections:
Loading Paper into the Paper Tray
Tab stock is fed starting from the top tab.
Originals
Tab Stock
Copies
When loading tab stock into the paper trays, specify the size of tab stock under [Paper Size] in [Tray Paper Settings] before using this function. Also, select [Tab Stock] and specify the position of the index tab under [Paper Type] in [Tray Paper Settings].
Original width
Index width
For details, see the following section:
Check the position of the index tab to avoid cropping the image. If the image extends beyond the index tab, the backs of sheets may get soiled with toner.
When a paper jam has occurred, check the order of originals and tab stock, and then restart copying.
You cannot have copies delivered face up.
For details about the sizes of tab stock that can be used, see the following section:
Copying onto tab stock from the bypass tray
Load the paper face up in the bypass tray.
The bypass tray () is automatically selected.
Press [].
Press [Paper Size].
Specify the paper size, and then press [OK].
Press [Paper Type].
Press [Tab Stock], and then press [OK] twice.
Press [Previous] or [Next] to switch the screen to be displayed.
Place the originals, and then press [Start].
For details about using tab stock, see Copying onto Tab Stock.
Copying onto tab stock from the paper tray or the wide LCT
Select the paper tray where the tab stock is loaded.
Place the originals, and then press [Start].
For details about using tab stock, see Copying onto Tab Stock.