Maintenance

This section describes the settings in [Maintenance].

Setting Items	Description
Adjust Print Position	You can print the test sheet and adjust the print start position of paper on a paper input location basis. Adjust Print Position
Auto Adjust Head Position	You can print the test pattern and re-calibrate the machine when printing produces misaligned verticals or blurred colors. Auto Adjust Head Position
Manual Adjust Head Position	You can manually adjust the head position when Auto Adjust Head Position fails or it appears that no improvement is made. Manual Adjust Head Position
Print Nozzle Check Pattern	You can print the test pattern to check for non-firing nozzles. Print Nozzle Check Pattern
Clean Print-heads	You can clean the print-heads. Use this function when a specific color is printed unclearly or not printed at all. Clean Print-heads
Flush Print-heads	You can clean the print-heads far more thoroughly. Use this function only when repeated Clean Print-heads operations fail to clean the print-heads because it consumes much more ink than Clean Print-heads. Flush Print-heads
Adjust Paper Feed	You can print the test sheet and adjust paper feed on a paper input location basis when misalignment of horizontals or image surface irregularities occurs. Adjust Paper Feed
Cut Paper	You can cut a paper roll at the specified length from the paper's leading edge. Cut Paper