User GuideIM C2000/C2500/C3000/C3500/C4500/C5500/C6000 series

Edit

This section describes the settings in the [Edit] menu under [Copier / Document Server Settings].

Introduction of Two Types of Setting Screens (Standard/Classic)

Items

Description

Front Margin: Left / Right

Back Margin: Left / Right

Region A icon (mainly Europe and Asia)

You can specify left and right margins on the front and back sides of copies within the range of 0 to 30 mm.

  • Default

    • Front side [Left: 5 mm]

    • Back side [Right: 5 mm]

Region B icon (mainly North America)

You can specify left and right margins on the front and back sides of copies within the range of 0.0 to 1.2 inches.

  • Default

    • Front side [Left: 0.2 inches]

    • Back side [Right: 0.2 inches]

Duplex Copying

Front Margin: Top / Bottom

Back Margin: Top / Bottom

Region A icon (mainly Europe and Asia)

You can specify top and bottom margins on the front and back sides of copies within the range of 0 to 30 mm.

  • Default: [Top/Btm: 0 mm]

Region B icon (mainly North America)

You can specify top and bottom margins on the front and back sides of copies within the range of 0.0 to 1.2 inches.

  • Default: [Top/Btm: 0.0 inch]

Duplex Copying

1 Sided2 Sided Auto Margin: TtoT

1 Sided2 Sided Auto Margin: TtoB

Region A icon (mainly Europe and Asia)

In [1 Sided][2 Sided] mode, you can specify the margins on the back side L / R or back side T / B within the range of 0 to 30 mm.

  • Default

    • Back side L / R [L/R: 0 mm]

    • Back side T / B [Top/Btm: 0 mm]

Region B icon (mainly North America)

In [1 Sided][2 Sided] mode, you can specify the margins on the back side L / R or back side T / B within the range of 0.0 to 1.2 inches.

  • Default

    • Back side L / R [L/R: 0.0 inch]

    • Back side T / B [Top/Btm: 0.0 inch]

Duplex Copying

Erase Border Width

Region A icon (mainly Europe and Asia)

In [Erase Border] mode, you can specify the width for erasing the border within the range of 2 to 99 mm.

  • Default: [10 mm]

Region B icon (mainly North America)

In [Erase Border] mode, you can specify the width for erasing the border within the range of 0.1 to 3.9 inches.

  • Default: [0.4 inches]

Erasing Shadow and Border When Copying a Book-type Original

Erase Original Shadow in Combine

In Combine mode, you can specify whether to erase a 3 mm (0.1 inch) boundary margin around all four edges of each original.

  • Default: [On]

Combining and Copying a Multi-page Original onto a Single Sheet of Paper

Erase Center Width

Region A icon (mainly Europe and Asia)

In [Erase Center] mode, you can specify the width for erasing the border within the range of 2 to 99 mm.

  • Default: [10 mm]

Region B icon (mainly North America)

In [Erase Center] mode, you can specify the width for erasing the border within the range of 0.1 to 3.9 inches.

  • Default: [0.4 inches]

Erasing Shadow and Border When Copying a Book-type Original

Front Cover Copy in Combine

(On machines installed with RICOH Always Current Technology v1.1 or earlier, this item is enabled only when [Copier (Classic)] is used.)

You can specify whether to make a combined copy on the front cover sheet when you select Front Cover and Combines modes.

When [Combine] is selected:

When [Do not Combine] is selected:

  • Default: [Combine]

Copy Order in Combine

You can select the copy order in Combine mode.

When [From Left to Right] is selected:

When [From Top to Bottom] is selected:

  • Default: [From Left to Right]

Combining and Copying a Multi-page Original onto a Single Sheet of Paper

Orientation: Booklet, Magazine

You can select the opening orientation of copies made using Booklet or Magazine mode.

  • Default: [Open to Left]

Binding Copied Pages

Copy on Designating Page in Combine

(On machines installed with RICOH Always Current Technology v1.1 or earlier, this item is enabled only when [Copier (Classic)] is used.)

You can specify whether to make a combined copy on the inserted slip sheets in Designate / Chapter mode.

When [Combine] is selected:

When [Do not combine] is selected:

  • Default: [Combine]

Image Repeat Separation Line

(On machines installed with previous versions of RICOH Always Current Technology v1.1, this item is enabled only when [Copier (Classic)] is used.)

Double Copies Separation Line

Separation Line in Combine

You can specify whether to use a separation line when copying multiple pages on one side of the paper. You can select the type and color from seven colors.

Type (Solid, Broken A, Broken B, Crop Marks):

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.

  • Default

    • Type of Separation Line: [None]

    • Color of Separation Line in Full Color: [Black]