Copying onto Envelopes
To copy onto envelopes that are not usually used, set them in the bypass tray.
If you copy onto envelopes frequently, set them in the paper tray.
The Duplex Copy function cannot be used for envelopes. If Duplex Copy is specified, press one of the following keys to cancel the setting.
Press [Copy] on the Home screen.
Set the envelope in the bypass tray with the copying side face up.
Envelope Orientation and Recommended Status
The "Bypass Tray Paper Settings" screen is displayed.
Press [Change Setting].
Select [Envelope], and then proceed to the next screen.
To change the envelope weight, press [ChngThickness] to specify the weight.Select the envelope size that you set, and then press [OK].
When you select [Custom Size], enter the envelope size.
Confirm the settings on the "Bypass Tray Paper Settings" screen, and then press [OK].
Place the original on the exposure glass.
Envelope Orientation and Recommended StatusPress [Start].
The Duplex Copy function cannot be used for envelopes. If Duplex Copy is specified, press one of the following keys to cancel the setting.
Set the envelopes in the paper tray.
Envelope Orientation and Recommended Status
You can load envelopes into Tray 1.
Recommended Paper Sizes and TypesPress [Tray/Paper Settings] on [Settings] screen, and specify a paper size and paper thickness for the envelopes that are loaded.
Specifying Regular Sizes Using the Control Panel
Specifying Paper Type and Thickness SettingsPress [Copy] on the Home screen.
Press the paper tray select key on the Copy screen.
Press [Tray 1].
Place the original on the exposure glass.
Envelope Orientation and Recommended StatusPress [Start].