Finishing

This section describes the settings in [Finishing] under [Copier / Document Server Settings].

Sort

Setting Items	Description
Rotate Sort: Auto Paper Continue	You can specify whether the machine continues copying using the paper set in another paper tray when paper of the required orientation runs out during rotate sort. Default: [Off]
Memory Full Auto Scan Restart	When the memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals. When you specify [On], all pages are copied and separately sorted into two halves according to the output timing of scanning. When you specify [Off], the machine stops operation. Remove the first copy pages, and you can avoid sorting the first half pages and second half pages separately. Default: [Off]

Setting Items

Description

Rotate Sort: Auto Paper Continue

You can specify whether the machine continues copying using the paper set in another paper tray when paper of the required orientation runs out during rotate sort.

Default: [Off]

Memory Full Auto Scan Restart

When the memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals.

When you specify [On], all pages are copied and separately sorted into two halves according to the output timing of scanning.

When you specify [Off], the machine stops operation. Remove the first copy pages, and you can avoid sorting the first half pages and second half pages separately.

Default: [Off]

Staple

Depending on the folding unit installed on the machine, some setting items are not displayed.

Setting Items	Description
Stapleless Position (Only when Internal Finisher SR3300 or Finisher SR3260 is installed) (This item is enabled only when the [Copier (Classic)] is used.)	You can specify whether to display the Stapleless Stapler key on the initial screen of the Copy function. To display the key, select [Stapleless Stapler]. Default: [Stapleless Stapler] Stapling Copied Pages
Staple Position (This setting item is enabled only when [Copier (Classic)] is used.)	You can specify which staple-type key is displayed on the initial screen of the Copier function. You can specify up to four staple types. The types of staple differ depending on the finisher attached. Stapling Copied Pages

Setting Items

Description

Stapleless Position

(Only when Internal Finisher SR3300 or Finisher SR3260 is installed)

(This item is enabled only when the [Copier (Classic)] is used.)

You can specify whether to display the Stapleless Stapler key on the initial screen of the Copy function.

To display the key, select [Stapleless Stapler].

Default: [Stapleless Stapler]

Stapling Copied Pages

Staple Position

(This setting item is enabled only when [Copier (Classic)] is used.)

You can specify which staple-type key is displayed on the initial screen of the Copier function. You can specify up to four staple types. The types of staple differ depending on the finisher attached.

Stapling Copied Pages

Punch

This setting item is displayed when an optional finisher and a punch unit are installed on the machine.

Setting Items	Description
Punch Type (This item is enabled only when the [Copier (Classic)] is used.)	You can specify which punch-type key is displayed on the initial screen of the Copy function. When 2 & 4 hole punch unit is installed: Default Punch 1: [Left 2] Punch 2: [Top 2] When 2 & 3 hole punch unit is installed: Default Punch 1: [Left 3] Punch 2: [Top 3] When 4 hole punch unit is installed: Default Punch 1: [Left 4] Punch 2: [Top 4] Punching Holes on the Copied Pages

Setting Items

Description

Punch Type

(This item is enabled only when the [Copier (Classic)] is used.)

You can specify which punch-type key is displayed on the initial screen of the Copy function.

When 2 & 4 hole punch unit is installed:

Default
- Punch 1: [Left 2]
- Punch 2: [Top 2]

When 2 & 3 hole punch unit is installed:

Default
- Punch 1: [Left 3]
- Punch 2: [Top 3]

When 4 hole punch unit is installed:

Default
- Punch 1: [Left 4]
- Punch 2: [Top 4]

Punching Holes on the Copied Pages

Fold

Theses setting items are displayed when the optional internal multi-folding unit is installed on the machine.

Setting Items	Description
Z-fold/Half Fold Output Tray Settings	You can specify the tray to which Z-fold/half paper is delivered. Default When Booklet Finisher SR3270 or Finisher SR3260 is installed: [Finisher Upper Tray] When Booklet Finisher SR3290 or Finisher SR3280 is installed: [Finisher Shift Tray]
Half Fold	Specify the fold orientation and print side for half fold. Default Fold Orientation: [Right - Left] Print Side: [Inside] Folding Copied Sheets
Letter Fold-out	You can specify the fold and page opening direction for Letter Fold-out. Default Fold Orientation: [Right - Left] Open Orientation: [Open to Right] Folding Copied Sheets
Letter Fold-in	You can specify the fold and page opening direction and print side for Letter Fold-in. Default Fold Orientation: [Right - Left] Open Orientation: [Open to Right] Print Side: [Inside] Folding Copied Sheets