Input / Output
This section describes the settings in the [Input / Output] tab under [Copier / Document Server Settings].
Setting Items | Description |
|---|---|
Switch to Batch | You can select to have [Batch] mode or [SADF] mode displayed when you press [Original Settings].
|
SADF Auto Reset | In SADF mode, you can specify the time to place an original in the ADF after the previous original has been fed. When the specified time has passed, the original will not be fed automatically.
|
Memory Full Auto Scan Restart | When the memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals. When you specify [On], all pages are copied and separately sorted into two halves according to the output timing of scanning. When you specify [Off], the machine stops operation. Remove the first copy pages, and you can avoid sorting the first half pages and second half pages separately.
|
Letterhead Setting | You can specify whether to use letterhead paper. When you specify [On], the paper is not rotated to prevent copying onto the letterhead paper in an incorrect orientation.
|
Staple Position (This setting item is enabled only when the [Copier (Classic)] is used.) | You can specify which staple-type key is displayed on the initial screen of the Copy function. This setting item can be selected only on IM 600SRF. |
Simplified Screen: Finishing Types (This setting item is enabled only when the [Copier (Classic)] is used.) | You can select the finishing function keys displayed on the Copy screen.
|