Edit

Front Margin: Left / Right

Back Margin: Left / Right

(mainly Europe and Asia)

You can specify left and right margins on the front and back sides of copies within the range of 0 to 30 mm.

(mainly North America)

You can specify left and right margins on the front and back sides of copies within the range of 0.0 to 1.2 inches.

Duplex Copying

Front Margin: Top / Bottom

Back Margin: Top / Bottom

(mainly Europe and Asia)

You can specify top and bottom margins on the front and back sides of copies within the range of 0 to 30 mm.

(mainly North America)

You can specify top and bottom margins on the front and back sides of copies within the range of 0.0 to 1.2 inches.

Duplex Copying

1 Sided2 Sided Auto Margin: TtoT

1 Sided2 Sided Auto Margin: TtoB

(mainly Europe and Asia)

In [1 Sided][2 Sided] mode, you can specify the margins on the back side L / R or back side T / B within the range of 0 to 30 mm.

(mainly North America)

In [1 Sided][2 Sided] mode, you can specify the margins on the back side L / R or back side T / B within the range of 0.0 to 1.2 inches.

Duplex Copying

Erase Border Width

(mainly Europe and Asia)

In [Erase Border] mode, you can specify the width for erasing the border within the range of 2 to 99 mm.

(mainly North America)

In [Erase Border] mode, you can specify the width for erasing the border within the range of 0.1 to 3.9 inches.

Erasing Shadow and Border When Copying a Book-type Original

Erase Original Shadow in Combine

In Combine mode, you can specify whether to erase a 3 mm (0.1 inch) boundary margin around all four edges of each original.

Combining and Copying a Multi-page Original onto a Single Sheet of Paper

Erase Center Width

(mainly Europe and Asia)

In [Erase Center] mode, you can specify the width for erasing the border within the range of 2 to 99 mm.

(mainly North America)

In [Erase Center] mode, you can specify the width for erasing the border within the range of 0.1 to 3.9 inches.

Erasing Shadow and Border When Copying a Book-type Original

Front Cover Copy in Combine

(This setting item is enabled only when the [Copier (Classic)] is used.)

You can specify whether to make a combined copy on the front cover sheet when you select Front Cover and Combines modes.

When [Combine] is selected:

When [Do not Combine] is selected:

Copy Order in Combine

You can select the copy order in Combine mode.

When [From Left to Right] is selected:

When [From Top to Bottom] is selected:

Combining and Copying a Multi-page Original onto a Single Sheet of Paper

Orientation: Booklet, Magazine

You can select the opening orientation of copies made using Booklet or Magazine mode.

Binding Copied Pages

Copy on Designating Page in Combine

(This setting item is enabled only when the [Copier (Classic)] is used.)

You can specify whether to make a combined copy on the inserted slip sheets in Designate / Chapter mode.

When [Combine] is selected:

When [Do not combine] is selected:

Image Repeat Separation Line

(This setting item is enabled only when the [Copier (Classic)] is used.)

Separation Line in Combine

You can specify whether to use a separation line when copying multiple pages on one side of the paper. You can select the type of the separation line.

Type (Solid, Broken A, Broken B, Crop Marks):

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.