Guide to Names and Functions of Components

CAUTION

  • Do not obstruct the machine's vents. Doing so can result in fire as the internal components are overheated.
Front and Left View

Main unit illustration numbered callout illustration

  1. Internal tray guide
    Open the guide to prevent the printed paper from falling off.

  2. Vents
    Prevent overheating.
    After large-volume printing, the ventilation fan may continue to work to lower the temperature inside the machine.

  3. Auto Document Feeder (ADF)
    Lower the cover over originals placed on the exposure glass.
    If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
    Placing an Original in the Auto Document Feeder (ADF)

  4. Exposure glass
    Place originals face down here.
    Placing an Original on the Exposure Glass

  5. Control panel
    Names and Functions of the Control Panel

  6. Internal tray
    Copied/printed paper and fax messages are delivered here.

  7. Front cover
    Open to replace the toner cartridge or waste toner bottle.
    Replacing the Toner
    Replacing the Waste Toner Bottle

  8. Paper tray (Tray 1)
    Standard paper trays. Load paper here.
    Loading Paper into the Paper Tray

  9. Lower paper trays (Trays 2-4)
    Optional paper trays. Load paper here.
    Loading Paper into the Paper Tray


Section Top

Front and Right View

Main unit illustration numbered callout illustration

  1. ADF's extender
    Raise the ADF's extender when you place originals that are longer than A4 Landscapeor 8 1/2 x 11 Landscape size.

  2. Document feeder paper guide tray
    When you place an originals longer than A4 or 8 1/2 Landscape size, pull out the document feeder paper guide tray.

  3. Right cover
    Open this cover to remove jammed paper.

  4. Paper guides
    When loading paper in the bypass tray, align the paper guides flush against the paper.

  5. Bypass tray
    Use to copy or print on adhesive labels or paper that cannot be loaded in the paper trays.
    Loading Paper into the Bypass Tray

  6. Extender
    Pull this extender out when loading paper larger than A4Landscape, 81/2 × 11 in the bypass tray.

  7. Lower right cover
    Open this cover to remove jammed paper.

  8. Main power switch
    To turn the power on and off, open the cover of the main power switch and press the main power switch.
    Turning On and Off the Power

Section Top

Rear and Left View

Main unit illustration numbered callout illustration

  1. Ethernet interface
    Used the port to connect the machine to the network or to use the remote management service (@Remote) over the Internet.

  2. USB2.0 Interface Type B
    Use the port to connect the machine and the computer with the USB cable.

  3. USB2.0 Interface Type A
    Use the port to connect the communication dongle to use the remote management service (@Remote).

  4. Vents
    Prevent overheating.
    After large-volume printing, the ventilation fan may continue to work to lower the temperature inside the machine.

Note

Section Top

x

QR Code