List of Parameter Settings
Do not change the bit values that are not listed in the table.
Switch number | Bit number | Function to be configured | Current value |
|---|---|---|---|
02 | 0 | Printing the Forwarding Mark | 0: Do not print 1: Print (Default) |
02 | 3 | Printing the Sender Information | 0: Do not print 1: Print (Default) |
03 | 0 | Printing the Communication Result Report automatically | 0: Do not print 1: Print (Default) |
03 | 2 | Printing the Memory Storage Report automatically | 0: Do not print 1: Print (Default) |
03 | 3 | Printing the SEP Code RX Reserve Report automatically (This setting is valid only when [Fax (Classic)] is used.) | 0: Do not print (Default) 1: Print |
03 | 4 | Printing the SEP Code RX Result Report automatically (This setting is valid only when [Fax (Classic)] is used.) | 0: Do not print 1: Print (Default) |
03 | 5 | Printing the Immediate TX Result Report automatically | 0: Do not print (Default) 1: Print |
03 | 7 | Printing the records automatically | 0: Do not print 1: Print (Default) |
04 | 0 | Printing the Confidential File Report automatically | 0: Do not print 1: Print (Default) Receiving Faxes to Personal Boxes Transferring Received Fax Documents to Another Fax Destination |
04 | 1 | Automatically printing Communication Failure Report and SUB Code Transfer Report | 0: Do not print 1: Print (Default) |
04 | 4 | Showing the destination name in various reports | 0: Do not show 1: Show (Default) Viewing the Transmission Result of Sent Faxes |
04 | 5 | Displaying the user name in various reports or list | 0: Do not show 1: Show (Default) Viewing the Transmission Result of Sent Faxes Viewing the History of Sent and Received Faxes |
04 | 7 | Adding the original image to various reports or list | 0: Do not add 1: Add (Default) |
05 | 0 | Receive Service Call (SC) Condition (Substitute Reception during service call) | 0: Perform Substitute Reception 1: Do not receive (Default) |
05 | 2, 1 | Performing Substitute Reception when paper or toner is exhausted or all paper trays are malfunctioning and a document cannot be printed | 00: Perform Substitute Reception unconditionally 01: Perform Substitute Reception when receiving the sender name (for display) or sender fax number (Default) 10: Perform Substitute Reception when the ID matches the Closed Network Code 11: Do not receive incoming calls |
05 | 5 | Printing only on paper of the first priority | 0: Off (Default) 1: On |
05 | 7 | Submitting an alert when paper in any of the paper trays runs out | 0: Off (Default) 1: On |
06 | 0 | Priority given to the information shown under "Destination" in the records, the Immediate TX Result Report, and on the Transmission File Status screen for fax transmission | 0: Gives priority to the destination machine's information Priority is given to the information in the following order:
1: Gives priority to the Address Book information (Default) Priority is given to the information in the following order:
|
06 | 1 | Specify whether or not G3-1 communication conforms to Super G3. | 0: Off 1: On (Default) |
06 | 2 | Specify whether or not G3-2 communication conforms to Super G3. | 0: Off 1: On (Default) |
06 | 3 | Specify whether or not G3-3 communication conforms to Super G3. | 0: Off 1: On (Default) |
07 | 2 | Parallel Memory Transmission | 0: Off 1: On (Default) |
10 | 0 | Restricting operation on the stored reception documents from the control panel | 0: Do not restrict (Default) 1: Restrict |
10 | 1 | Combine Print | 0: Do not combine (Default) 1: Combine |
10 | 3 | Page reduction when printing | 0: Off (Default) 1: On |
10 | 6 | Using both e-mail notification and printed reports to confirm the transmission result | 0: Off (Default) 1: Print |
10 | 7 | Handling of the received document when a document storage error occurs | 0: Print and delete the received document (Default) 1: Delete the document after printing the report |
11 | 2 | Detecting a blank original | 0: Off 1: On (Default) |
11 | 5 | Storing or printing documents forwarded by [Register Special Sender] | 0: Do not store or print (Default) 1: Perform either Store or Print Print the document when [Off] is specified in both [Store] and [Print] in [Action on Receiving File] under [Reception File Settings]. The machine behaves as specified when any other settings are specified in these items. Specifying the Action to Perform When Receiving a Fax from Different Senders |
14 | 0 | Printing documents received while in the Sleep mode | 0: Print immediately (Default) 1: Print when recovered from the Sleep mode |
14 | 3 | Resetting the settings when switching the function | 0: Do not reset (Default) 1: Reset |
15 | 2, 1, 0 | Specifying the paper tray to use when the paper source tray is set | 001: Tray 1 (Default) 010: Tray 2 011: Tray 3 101: Large Capacity Tray |
15 | 5 | Set paper tray | 0: On 1: Off (Default) |
17 | 2 | Preventing transmission to the wrong destination when performing Broadcast Transmission | 0: Do not require pressing [Add] when adding a destination (Default) 1: Require pressing [Add] when adding a destination |
17 | 3 | Resetting the settings after scanning the original | 0: Reset (Default) 1: Do not reset |
17 | 7 | Receiving a fax manually by pressing [Start] in manual reception or fax information service | 0: Do not receive 1: Receive (Default) |
18 | 0 | Printing the sender name (for print) and date | 0: Do not print 1: Print (Default) |
18 | 1 | Printing Fax Header (for print) | 0: Do not print 1: Print (Default) |
18 | 2 | Printing Fax Header (for print) and document number | 0: Do not print 1: Print (Default) |
18 | 3 | Printing Fax Header (for print) and page number | 0: Do not print 1: Print (Default) |
19 | 0 | Function to shift the ejected sheets | 0: Do not use 1: Use (Default) |
19 | 1 | Sorting records by line type | 0: Off (Default) 1: On |
20 | 0 | Printing the LAN-Fax Result Report automatically | 0: Do not print (Default) 1: Print |
20 | 5, 4, 3, 2 | Time to retain the document that could not be printed from the LAN-Fax driver for reprinting | 0000: 0 minutes - 1111: 15 minutes
|
21 | 0 | Print conditions for a reception confirmation e-mail | 0: Print when an error occurs (Default) 1: Print all Confirming the Reception of an Internet Fax at the Destination |
21 | 1 | Responding to Reception Confirmation of an e-mail reception document | 0: Do not respond 1: Respond (Default) |
21 | 2 | Printing the JPEG/PDF file attached to an e-mail | 0: Do not print 1: Print (Default) |
21 | 3 | The file format in which to send a document when an e-mail or folder destination is specified as the destination of Forwarding, Backup File Transmission, receiver of Personal Box, or end receiver for Transfer Box | 0: TIFF (Default) 1: PDF Transferring Received Fax Documents to Another Fax Destination Transferring a Received Fax Document to E-mail Address or Folder |
21 | 4 | Sending records by e-mail | 0: Do not send (Default) 1: Send |
21 | 5 | Suppressing the output of the text data (subject, message) when receiving a normal mail (TIFF file attached) | 0: Do not suppress (Default) 1: Suppress |
21 | 6 | Displaying a warning for a network error | 0: Show (Default) 1: Do not show |
21 | 7 | Sending the e-mail reception error to the sender of the notification e-mail | 0: Send (Default) 1: Do not send |
22 | 0 | Detecting the dial tone before sending a fax when initiating a call on the G3-1 line | 0: Send even when not detected 1: Do not send if not detected (Default) |
22 | 1 | Detecting the dial tone before sending a fax when initiating a call on the G3-2 line | 0: Send even when not detected 1: Do not send if not detected (Default) |
22 | 2 | Detecting the dial tone before sending a fax when initiating a call on the G3-3 line | 0: Send even when not detected 1: Do not send if not detected (Default) |
24 | 0 | Retaining an unsent fax in the memory | 0: Do not store (Default) 1: Store |
24 | 1 | Duration to retain an unsent fax in the memory | 0: 24 hours (Default) 1: 72 hours
|
24 | 2 | Retaining the stored sent document in Document Box (This setting is valid only when [Fax (Classic)] is used.) | 0: Off (Default) 1: On
|
32 | 0 | Destination to give priority when a destination of the destination type specified for Forwarding, Forwarding per Sender, or as the destination for Personal Box, do not exist in a case in which more than one destination type is registered in the address book | 0: Paper priority IP-Fax destination has the highest priority, followed by fax destination, Internet fax destination, e-mail destination and folder destination. 1: Electronic media priority (Default) Internet fax destination has the highest priority, followed by e-mail destination, folder destination, IP-Fax destination, and fax destination. Transferring Received Fax Documents to Another Fax Destination Transferring a Received Fax Document to E-mail Address or Folder Specifying the Action to Perform When Receiving a Fax from Different Senders |
32 | 4 | Distributing the document received to the G3-1 line | 0: Off (Default) 1: On Transferring Received Fax Documents to Another Fax Destination |
32 | 5 | Distributing the document received to the G3-2 line | 0: Off (Default) 1: On Transferring Received Fax Documents to Another Fax Destination |
32 | 6 | Distributing the document received to the G3-3 line | 0: Off (Default) 1: On Transferring Received Fax Documents to Another Fax Destination |
34 | 0 | Using the Gatekeeper in IP-Fax | 0: Do not use (Default) 1: Use |
34 | 1 | Using the SIP server in IP-Fax | 0: Do not use (Default) 1: Use |
35 | 7, 6, 5, 4, 3, 2, 1, 0 | Redial interval when sending a backup file | 00000000: 0 minutes - 11111111: 255 minutes
|
36 | 7, 6, 5, 4, 3, 2, 1, 0 | Total number of calls initiated when performing Backup File Transmission (number of retries) | 00000000/00000001: 1 times - 11111110/11111111: 254 times
|
37 | 0 | Performing printing an error report and the backup file forcefully when the number of destinations exceeds the maximum while:
| 0: Do not process (Default) 1: Process |
37 | 3, 2 | Printing the backup data in the TX communication failure report when the backup transmission fails | 00: Do not print 01: Print only the first page 10: Print all pages (Default) |
37 | 4 | Quoting the sender information in the file name when transferring a received document to a folder destination | 0: Do not quote (Default) 1: Quote Transferring a Received Fax Document to E-mail Address or Folder |
37 | 5 | Limiting usable characters in the file name when transferring a received document to a folder destination | 0: Do not restrict (Default) 1: Restrict Transferring a Received Fax Document to E-mail Address or Folder |
38 | 7, 6, 5, 4, 3, 2, 1, 0 | Total number of calls initiated when sending a document that could not be sent to a folder destination by Forwarding or Forwarding per Sender | 00000000/00000001: 1 times - 11111110/11111111: 254 times
Transferring a Received Fax Document to E-mail Address or Folder Specifying the Action to Perform When Receiving a Fax from Different Senders |
39 | 7, 6, 5, 4, 3, 2, 1, 0 | Interval (minutes) of redialing performed when sending a document that could not be sent to a folder destination by Forwarding or Forwarding per Sender | 00000001: 1 minutes - 11111111: 255 minutes
Transferring a Received Fax Document to E-mail Address or Folder Specifying the Action to Perform When Receiving a Fax from Different Senders |
40 | 0 | Receiving documents when the received document storage error occurs | 0: Print and delete the oldest received document before receiving a document (Default) 1: Do not receive |
40 | 1 | Displaying the folder path or e-mail address in the destination field of the transmission history when sending or forwarding a document to a destination registered in the address book | 0: Off (Default) 1: On |
45 | 2 | The file format in which to send a document when an e-mail or folder destination is specified as the destination of Forwarding, Backup File Transmission, receiver of Personal Box, or receiving station of Transfer Box | 0: PDF (Default) 1: PDF/A
Transferring Received Fax Documents to Another Fax Destination |
45 | 3 | Printing and/or storing of a document when transferring the document to all destinations by Forwarding | 0: Follow the setting in Reception File Settings (Default) 1: Do not print/store Select [1] (Do not print/store) if not printing or storing a document that has been transferred normally even when [On] is specified in [Print] or [Store] in [Action on Receiving File] under [Reception File Settings]. Transferring Received Fax Documents to Another Fax Destination |
46 | 3 | Periodically check the line being disconnected on the G3-1 line | 0: Disable (Default) 1: Enable
|
