Finishing

Rotate Sort: Auto Paper Continue

You can specify whether the machine continues copying using the paper set in another paper tray when paper of the required orientation runs out during rotate sort.

Memory Full Auto Scan Restart

When the memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals.

When you specify [On], all pages are copied and separately sorted into two halves according to the output timing of scanning.

When you specify [Off], the machine stops operation. Remove the first copy pages, and you can avoid sorting the first half pages and second half pages separately.

Staple Position

(This setting item is enabled only when [Copier (Classic)] is used.)

You can specify which staple-type key is displayed on the initial screen of the Copier function. You can specify up to four staple types. The types of staple differ depending on the finisher attached.

Stapling Copied Pages

Punch Type

(This item is enabled only when the [Copier (Classic)] is used.)

You can specify which punch-type key is displayed on the initial screen of the Copy function.

When 2 & 4 hole punch unit is installed:

When 2 & 3 hole punch unit is installed:

When 4 hole punch unit is installed:

Punching Holes on the Copied Pages

Half Fold Settings (Finisher: Booklet Tray)

Specify each settings of half fold.

Z-fold Output Tray

You can specify the tray to which Z-fold paper is delivered.

Half Fold

Specify the fold orientation and print side for half fold.

Folding Copied Sheets

Letter Fold-out

You can specify the fold and page opening direction for Letter Fold-out.

Folding Copied Sheets

Letter Fold-in

You can specify the fold and page opening direction and print side for Letter Fold-in.

Folding Copied Sheets

Double Parallel Fold

Specify each settings of double parallel fold.

Folding Copied Sheets

Gate Fold

Specify each settings of gate fold.

Folding Copied Sheets

Sort / Stack Shift Tray Setting

You can specify whether to shift the shift tray in Sort mode or Stack mode.

Insert Separation Sheet

You can specify the number of copy pages for inserting the separation sheet from 1 to 999 pages in increments of 1 page.

Copy Back Cover

When one-sided copying, you can specify whether to have the back cover outside (outside page) or inside (inside page).

Copy Eject Face Method in Glass Mode

You can select the way in which copies are delivered when copying an original placed on the exposure glass.

Copy Eject Face Method in Bypass Mode

You can select the way in which copies are delivered when copying from the bypass tray.

Fore Edge Cut Setting

Specify the length of the fore edge cut.

Specify the cut length from 2.0 to 24.0 mm (0.08 to 0.94 inches) in increments of 1 mm (0.01 inches). In case of B5 JIS size paper, the cut length is between 2.0 to 10.0 mm.

Default: