User GuideIM C2000/C2500/C3000/C3500/C4500/C5500/C6000 series

List/Test Print

This section describes the settings in [List/Test Print] under [Printer Settings].

Introduction of Two Types of Setting Screens (Standard/Classic)

  • The paper is fed from the tray in which A4 (or 81/2 × 11) plain paper / recycled paper is set.

  • If the specified paper is not set in the tray, the paper is fed from the tray specified by [Tray/Paper Settings][Paper Tray Priority][Paper Tray Priority: Printer].

Machine Information

Items

Description

Multiple Lists

You can print the configuration page and error log.

Configuration Page

You can print the machine's current values of the Printer Settings.

Error Log

You can print error logs for the 30 most recent errors that occurred during printing. The error logs of jobs canceled are also printed.

Error logs older than the 30 most recent jobs are deleted and not printed. However, if the oldest error belongs to Sample Print, Locked Print, Hold Print, or Stored Print, it is not deleted. Instead, it will be stored separately up to 30.

PDL Information

Items

Description

PCL Config./Font Page

You can print the current configuration and installed PCL font list.

PS Config./Font Page

You can print the current configuration and installed PostScript font list.

PDF Config./Font Page

You can print the current configuration and installed PDF font list.

Sample Pages

Items

Description

Color Test Chart

The machine prints a sheet to check that the colors (C, M, Y, and K) can be printed properly.

Change Modes

Items

Description

Hex Dump

The machine enters the mode to print hexadecimal data sent from the computer (Hex Dump mode). Use this function to determine how a printing error occurred.

Print Settings

Items

Description

Side(s) to Print of List/Test Print

Specify whether to print [List/Test Print] on one side or both sides of paper.

This function is available on machines implemented with RICOH Always Current Technology v1.2 or later.

  • Default : [1 Sided]