User GuideIM C2000/C2500/C3000/C3500/C4500/C5500/C6000 series

Others (Copier / Document Server Settings)

This section describes the settings in [Others] under [Copier / Document Server Settings].

Introduction of Two Types of Setting Screens (Standard/Classic)

Quantity

Items

Description

Maximum Copy Quantity

You can specify the maximum copy quantity at one time.

  • Default: [999 sheet(s)]

Copy Count Display

Specify which one is displayed, the number of copies made (count up) or the number of copies yet to be made (count down).

  • Default: [Up]

Customize Function

Items

Description

Customize Function: Copy (Classic Mode)

(This is available only when [Copier (Classic)] is used.)

You can assign frequently-used functions to the "Registered Program" keys on the Copy screen.

To use the ID Card Copy function, register [ID Card Copy] to the registered program key.

  • Default: [1 sided2 sided], [2 sided2 sided], [1 sidedComb 2orig], [1 sidedComb 4orig], [Create Margin]

Customize Func.: Document Srvr Storage

You can assign frequently-used functions to the "Registered Program" keys on the Document Server screen.

  • Default: [2 Sided Orig. Right/Left], [1 sidedComb 2orig], [1 sidedComb 4orig], [1 sidedComb 8orig], [Create Margin], [Off]

Customize Function: Copy (Standard Mode)

You can assign frequently-used settings to the function keys on the Copy screen (Standard).

When a finisher is mounted, up to two Staple Position keys are already set depending on the type of the finisher.

  • Default: [1 sided2 sided], [2 sided2 sided], [1 sidedComb 2orig], Staple position setting 1*1, Punch position setting, Staple position setting 2*1*2

Customize Function: Copy (All View Mode)

You can assign frequently-used settings to the function keys on the Copy screen (All View).

To use the ID Card Copy function, register [ID Card Copy] to the registered program key.

When a finisher is mounted, up to two Staple Position keys are already set depending on the type of the finisher.

  • Default: [1 sided2 sided], [2 sided2 sided], [1 sidedComb 2orig], [1 sidedComb 4orig], [Create Margin], [Sort], Staple position setting 1*1, Staple position setting 2*1*2, [Stack], Punch position setting 1, Punch position setting 2

Simplified Screen: Finishing Types

(This is available only when [Copier (Classic)] is used.)

You can select the finishing function keys displayed on the Copy screen.

  • Default: Finishing Type 1, Finishing Type 2, Finishing Type 3: [Do not Display]

*1 The key to be displayed depends on the type of installed finisher.

*2 Each key may not be displayed, depending on the installed finisher.

Number Keys / Preview

Items

Description

Switching: Number Keys / Preview

You can specify whether the number keys or a preview of the current status is displayed on the right of the Copy screen (Standard/All View).

  • Default: [Display Finished Image]