User GuideIM C2000/C2500/C3000/C3500/C4500/C5500/C6000 series

2 Sided / Combine

This section describes the settings in [2 Sided / Combine] under [Copier / Document Server Settings].

Introduction of Two Types of Setting Screens (Standard/Classic)

2 Sided

Items

Description

Original Orientation in Duplex Mode

(This is available only when [Copier (Classic)] is used.)

You can specify the default setting for the orientation of the originals when copying two-sided originals.

  • Default: [Right / Left]

Copy Orientation in Duplex Mode

(This is available only when [Copier (Classic)] is used.)

You can specify the default setting for the orientation of the copies when making two-sided copies.

  • Default: [Right / Left]

Combine

Items

Description

Copy Order in Combine

You can select the copy order in Combine mode.

When [From Left to Right] is selected:

When [From Top to Bottom] is selected:

  • Default: [From Left to Right]

Combining and Copying a Multi-page Original onto a Single Sheet of Paper

Separation Line in Combine

You can specify whether to use a separation line when copying multiple pages on one side of the paper. You can select the type and color from seven colors.

Type (Solid, Broken A, Broken B, Crop Marks):

Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.

  • Default: [Off]

Front Cover Copy in Combine

(On machines installed with RICOH Always Current Technology v1.1 or earlier, this item is enabled only when [Copier (Classic)] is used.)

You can specify whether to make a combined copy on the front cover sheet when you select Front Cover and Combines modes.

When [Combine] is selected:

When [Do not Combine] is selected:

  • Default: [Combine]

Copy on Designating Page in Combine

(On machines installed with RICOH Always Current Technology v1.1 or earlier, this item is enabled only when [Copier (Classic)] is used.)

You can specify whether to make a combined copy on the inserted slip sheets in Designate / Chapter mode.

When [Combine] is selected:

When [Do not combine] is selected:

  • Default: [Combine]

Book

Items

Description

Orientation: Booklet, Magazine

You can select the opening orientation of copies made using Booklet or Magazine mode.

  • Default: [Open to Left]

Binding Copied Pages