User GuideIM C2000/C2500/C3000/C3500/C4500/C5500/C6000 series

Encrypting Network Communication

To protect communicated information, it is necessary to encrypt communication between computers and external equipment.

Data sent from and received by the machine can be intercepted, cracked, or tampered with during transmission. For example, the following data can be transmitted between the machine and external devices or the computer:

  • Documents printed in the company using the printer driver

  • Documents scanned and sent by e-mail to use in a meeting

  • Login user name and login password

See the table below for the methods of encrypting data.

Data to encrypt

Encryption method

Process/Reference within the section

Web Image Monitor

IPP print

Windows authentication

LDAP authentication

E-mail transmission

SSL/TLS

Install a device certificate.

  1. Installing a Self-signed Certificate/Certificate Issued by a Certificate Authority

  2. Encrypting Transmission Using SSL/TLS

E-mail

S/MIME

Install a user certificate.

  • Encrypting E-mail Sent from the Machine by S/MIME

Machine management data

SNMPv3

Specify an encryption password.

  • Encrypting Data Communicated with Machine Management Software Via SNMPv3

Authentication information of print jobs

Driver encryption key

IPP authentication

Specifying a Driver Encryption Key

Specify IPP authentication.

  • Encrypting the Login Password of Print Jobs

Kerberos authentication data

Varies depending on the KDC server

Select an encryption method.

  • Encrypting Communication Between KDC and the Machine

Installing a Self-signed Certificate/Certificate Issued by a Certificate Authority (Settings Screen Type: Standard)

To encrypt communication with the machine, install a device certificate.

Two types of device certificates can be used: a self-signed certificate created by the machine and a certificate issued by a certificate authority. When you need higher reliability, use a certificate issued by a certificate authority.

Illustration of installing a self-signed certificate/certificate issued by a certificate authority
  • Install a device certificate from the control panel or Web Image Monitor.

  • You can install only one self-signed certificate from the control panel. To install multiple certificates or a certificate issued by a certificate authority, specify the settings from Web Image Monitor.

Installing a self-signed certificate from the control panel

1Log in to the machine as the network administrator on the control panel.

Logging in to the Machine as the Administrator

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [System Settings].

Operation panel screen illustration

4Press [Settings for Administrator][Security][Register/Delete Device Certificate].

5Select [Certificate No. 1] and press [Register].

6Specify the information to include in the certificate.

Operation panel screen illustration
  • Common Name: Enter the name of the device certificate to create. You must enter a name.

  • Email Address: To use the device certificate for S/MIME, PDF Digital Signature, or PDF/A Digital Signature, enter the machine administrator's e-mail address.

  • Specify Organization, Organizational Unit, and other items as necessary.

7Press [OK].

8Press [Exit].

Press [Home] (Operation panel screen illustration), and then log out of the machine.

Installing a self-signed certificate/certificate issued by a certificate authority from Web Image Monitor

1Log in to the machine as the network administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [Device Certificate] on "Security".

4On the "Device Certificate" screen, install a self-signed certificate or certificate issued by a certificate authority by following the instructions below:

Web browser screen illustration

To install a self-signed certificate

Create and install a self-signed certificate.

  1. Select the number from the list to create a self-signed certificate.

  2. Click [Create] to specify the necessary settings.

    • Common Name: Enter the name of the device certificate to create. You must enter a name.

    • Email Address: To use the device certificate for S/MIME, PDF Digital Signature, or PDF/A Digital Signature, enter the machine administrator's e-mail address.

    • Enter "Organization", "Organizational Unit", and other items as necessary.

  3. Click [OK].

    "Installed" is displayed in "Certificate Status".

To install a certificate issued by a certificate authority

Request a device certificate from a certificate authority and install it. Follow the same steps to install an intermediate certificate.

  1. Select the number from the list to create a device certificate.

  2. Click [Request] to specify the necessary settings.

  3. Click [OK].

    "Requesting" is displayed in "Certificate Status".

  4. Apply to the certificate authority for the device certificate.

    • You cannot apply to the certificate authority from Web Image Monitor. The application procedure varies depending on the certificate authority. For details, contact the certificate authority.

    • For the application, click the Details icon Operation panel screen illustration and use the information that appears in "Certificate Details".

    • The issuing location may not be displayed if you request multiple certificates at the same time. When you install a certificate, be sure to check the certificate destination and installation procedure.

  5. After the device certificate has been issued by the certificate authority, select the number of the issued certificate from the list on the "Device Certificate" screen, and then click [Install].

  6. Enter the contents of the device certificate in the entry fields.

    • To install the intermediate certificate at the same time, enter also the contents of the intermediate certificate.

    • If an intermediate certificate issued by a certificate authority is not installed, an alert message is displayed during network communication. When an intermediate certificate has been issued by a certificate authority, you must install the intermediate certificate.

  7. Click [OK].

    "Installed" is displayed in "Certificate Status".

5After completing the installation, select the certificate for each application on "Certification".

Web browser screen illustration

6Click [OK].

7After completing the configuration, click [OK] and exit the Web browser.

Note

  • To print data in the machine using IPP-SSL, the user must install a certificate in the computer. Select "Trusted Root Certification Authorities" for the certificate store location when accessing the machine by IPP.

  • To change "Common Name" of the device certificate when using the Windows standard IPP port, delete any previously configured PC printer beforehand and install the printer driver again. Also, to change the user authentication settings (login user name and password), delete any previously configured PC printer beforehand, change the user authentication settings, and then install the printer driver again.

Encrypting Transmission Using SSL/TLS (Settings Screen Type: Standard)

SSL (Secure Sockets Layer) /TLS (Transport Layer Security) is a method to encrypt network communications. SSL/TLS prevents data from being intercepted, cracked, or tampered.

Flow of SSL/TLS encrypted communications

  1. The user's computer requests the SSL/TLS device certificate and public key when accessing the machine.

  2. The device certificate and public key are sent from the machine to the user's computer.

  3. The shared key created on the computer is encrypted using the public key, sent to the machine, and then decrypted using the private key in the machine.

  4. The shared key is used for data encryption and decryption, thus achieving secure transmission.

  • To enable encrypted communication, install a device certificate in the machine in advance.

  • To encrypt communication using SSL/TLS, enable SSL/TLS as follows:

Enabling SSL/TLS

1Log in to the machine as the network administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [SSL/TLS] on "Security".

4Select the protocol to enable encrypted communication on "SSL/TLS" to specify the details about the communication method.

Web browser screen illustration
  • Permit SSL/TLS Communication: Select one of the encryption communication modes below:

    • Ciphertext Priority: Performs encrypted communication when a device certificate has been created. If encryption is not possible, the machine communicates data in clear text.

    • Ciphertext/Cleartext: Performs encrypted communication when connecting to the machine using an "https" address from a Web browser. Communicates in clear text when connecting to the machine using an "http" address.

    • Ciphertext Only: Allows encrypted communication only. If encryption is not possible, the machine does not communicate. If encryption is not possible for some reason, the machine cannot communicate. If this is the case, press [System Settings][Network/Interface][Communication Security][Permit SSL/TLS Communication] on the control panel, change the communication mode to [Ciphertext/Cleartext] temporarily, and then check the settings.

  • SSL/TLS Version: Specify TLS1.2, TLS1.1, TLS1.0, and SSL3.0 to enable or disable. At least one of these protocols must be enabled.

  • Encryption Strength Setting: Specify the encryption algorithm to apply to AES, 3DES, and RC4. You must select at least one check box.

  • KEY EXCHANGE: Specify whether to enable or disable exchanging of the RSA key.

  • DIGEST: Specify whether to enable or disable SHA-1 DIGEST.

5Click [OK].

6After completing the configuration, click [OK] and exit the Web browser.

To encrypt communications with the SMTP server, use the following procedure to change "SSL" to [On].

Enabling SSL for SMTP connection

1Log in to the machine as the network administrator on the control panel.

Logging in to the Machine as the Administrator

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [System Settings].

Operation panel screen illustration

4Press [Send (Email/Folder)][Email][SMTP Server].

5From the list next to Use Secure Connection (SSL), select [On].

Operation panel screen illustration
  • After completing the configuration, the port number changes to 465 (SMTP over SSL). When using SMTP over TLS (STARTTLS) for encryption, change the port number to 587.

  • When you specify the port number to a number other than 465 and 587, the communication is encrypted according to the setting in the SMTP server.

6Press [OK].

7Press [Home] (Operation panel screen illustration), and then log out of the machine.

Note

  • When SSL is enabled in the SMTP server, Internet faxes are always sent via the SMTP server.

Installing a Self-signed Certificate/Certificate Issued by a Certificate Authority (Settings Screen Type: Classic)

To encrypt communication with the machine, install a device certificate.

Two types of device certificates can be used: a self-signed certificate created by the machine and a certificate issued by a certificate authority. When you need higher reliability, use a certificate issued by a certificate authority.

  • Install a device certificate from the control panel or Web Image Monitor.

  • You can install only one self-signed certificate from the control panel. To install multiple certificates or a certificate issued by a certificate authority, specify the settings from Web Image Monitor.

Installing a self-signed certificate from the control panel

1Log in to the machine as the network administrator from the control panel.

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [Machine Features Settings].

Operation panel screen illustration

4Press [System Settings][Administrator Tools] tab [Program / Delete Device Certificate] to display the setting screen.

5Press [Certificate 1] to specify the necessary settings.

Operation panel screen illustration
  • Common Name: Enter the name of the device certificate to create. You must enter a name.

  • Email Address: To use the device certificate for S/MIME, PDF Digital Signature, or PDF/A Digital Signature, enter the machine administrator's e-mail address.

  • Enter "Organization", "Organizational Unit", and other items as necessary.

6Press [OK].

7Press [Exit].

8After completing the configuration, press Home (Operation panel screen illustration).

Installing a self-signed certificate/certificate issued by a certificate authority from Web Image Monitor

1Log in to the machine as the network administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [Device Certificate] on "Security".

4On the "Device Certificate" screen, install a self-signed certificate or certificate issued by a certificate authority by following the instructions below:

Web browser screen illustration

To install a self-signed certificate

Create and install a self-signed certificate.

  1. Select the number from the list to create a self-signed certificate.

  2. Click [Create] to specify the necessary settings.

    • Common Name: Enter the name of the device certificate to create. You must enter a name.

    • Email Address: To use the device certificate for S/MIME, PDF Digital Signature, or PDF/A Digital Signature, enter the machine administrator's e-mail address.

    • Enter "Organization", "Organizational Unit", and other items as necessary.

  3. Click [OK].

    "Installed" is displayed in "Certificate Status".

To install a certificate issued by a certificate authority

Request a device certificate from a certificate authority and install it. Follow the same steps to install an intermediate certificate.

  1. Select the number from the list to create a device certificate.

  2. Click [Request] to specify the necessary settings.

  3. Click [OK].

    "Requesting" is displayed in "Certificate Status".

  4. Apply to the certificate authority for the device certificate.

    • You cannot apply to the certificate authority from Web Image Monitor. The application procedure varies depending on the certificate authority. For details, contact the certificate authority.

    • For the application, click the Details icon Operation panel screen illustration and use the information that appears in "Certificate Details".

    • The issuing location may not be displayed if you request multiple certificates at the same time. When you install a certificate, be sure to check the certificate destination and installation procedure.

  5. After the device certificate has been issued by the certificate authority, select the number of the issued certificate from the list on the "Device Certificate" screen, and then click [Install].

  6. Enter the contents of the device certificate in the entry fields.

    • To install the intermediate certificate at the same time, enter also the contents of the intermediate certificate.

    • If an intermediate certificate issued by a certificate authority is not installed, an alert message is displayed during network communication. When an intermediate certificate has been issued by a certificate authority, you must install the intermediate certificate.

  7. Click [OK].

    "Installed" is displayed in "Certificate Status".

5After completing the installation, select the certificate for each application on "Certification".

Web browser screen illustration

6Click [OK].

7After completing the configuration, click [OK] and exit the Web browser.

Note

  • To print data in the machine using IPP-SSL, the user must install a certificate in the computer. Select "Trusted Root Certification Authorities" for the certificate store location when accessing the machine by IPP.

  • To change "Common Name" of the device certificate when using the Windows standard IPP port, delete any previously configured PC printer beforehand and install the printer driver again. Also, to change the user authentication settings (login user name and password), delete any previously configured PC printer beforehand, change the user authentication settings, and then install the printer driver again.

Encrypting Transmission Using SSL/TLS (Settings Screen Type: Classic)

SSL (Secure Sockets Layer) /TLS (Transport Layer Security) is a method to encrypt network communications. SSL/TLS prevents data from being intercepted, cracked, or tampered.

Flow of SSL/TLS encrypted communications

  1. The user's computer requests the SSL/TLS device certificate and public key when accessing the machine.

  2. The device certificate and public key are sent from the machine to the user's computer.

  3. The shared key created on the computer is encrypted using the public key, sent to the machine, and then decrypted using the private key in the machine.

  4. The shared key is used for data encryption and decryption, thus achieving secure transmission.

  • To enable encrypted communication, install a device certificate in the machine in advance.

  • To encrypt communication using SSL/TLS, enable SSL/TLS as follows:

Enabling SSL/TLS

1Log in to the machine as the network administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [SSL/TLS] on "Security".

4Select the protocol to enable encrypted communication on "SSL/TLS" to specify the details about the communication method.

Web browser screen illustration
  • Permit SSL/TLS Communication: Select one of the encryption communication modes below:

    • Ciphertext Priority: Performs encrypted communication when a device certificate has been created. If encryption is not possible, the machine communicates data in clear text.

    • Ciphertext/Cleartext: Performs encrypted communication when connecting to the machine using an "https" address from a Web browser. Communicates in clear text when connecting to the machine using an "http" address.

    • Ciphertext Only: Allows encrypted communication only. If encryption is not possible, the machine does not communicate. If encryption is not possible for some reason, the machine cannot communicate. If this is the case, select [System Settings][Interface Settings] tab [Permit SSL / TLS Communication] on the control panel, change the communication mode to [Ciphertext / Cleartext] temporarily, and then check the settings.

  • SSL/TLS Version: Specify TLS1.2, TLS1.1, TLS1.0, and SSL3.0 to enable or disable. At least one of these protocols must be enabled.

  • Encryption Strength Setting: Specify the encryption algorithm to apply to AES, 3DES, and RC4. You must select at least one check box.

  • KEY EXCHANGE: Specify whether to enable or disable exchanging of the RSA key.

  • DIGEST: Specify whether to enable or disable SHA-1 DIGEST.

5Click [OK].

6After completing the configuration, click [OK] and exit the Web browser.

To encrypt communications with the SMTP server, use the following procedure to change "SSL" to [On].

Enabling SSL for SMTP connection

1Log in to the machine as the network administrator from the control panel.

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [Machine Features Settings].

Operation panel screen illustration

4Press [System Settings][File Transfer] tab [SMTP Server] to display the setting screen.

5Press [On] of "Use Secure Connection (SSL)".

Operation panel screen illustration
  • After completing the configuration, the port number changes to 465 (SMTP over SSL). When using SMTP over TLS (STARTTLS) for encryption, change the port number to 587.

  • When you specify the port number to a number other than 465 and 587, the communication is encrypted according to the setting in the SMTP server.

6Press [OK].

7After completing the configuration, press Home (Operation panel screen illustration).

Note

  • When SSL is enabled in the SMTP server, Internet fax is always sent via the SMTP server.

Encrypting E-mail Sent from the Machine by S/MIME

S/MIME (Secure/Multipurpose Internet Mail Extensions) is an encryption method to improve security of e-mail communications. By specifying S/MIME, you can send an encrypted e-mail attaching an encrypted file or electronic signature.

  • When you send e-mails to both users whose mail clients support S/MIME and users whose clients does not support it, only e-mails sent to clients supporting S/MIME are encrypted.

  • The receiver must use software that supports S/MIME.

  • You can apply either an e-mail encryption or electronic signature, or apply both functions together.

  • When sending an e-mail attached with an electronic signature, you do not need the user certificate. Install a device certificate following the instructions in "Installing a Self-signed Certificate/Certificate Issued by a Certificate Authority" in this section, and then specify the electronic signature to attach to the e-mail.

Registering a user certificate to the user that will receive e-mails

To send an encrypted e-mail, first register a user certificate to the user that will receive the e-mail.

Prepare user certification in advance. You can register three types of user certificates to the machine: "DER Encoded Binary X.509", "Base 64 Encoded X.509", and "PKCS #7 certificate".

1Log in to the machine as the user administrator from Web Image Monitor.

2Click [Address Book] from the [Device Management] menu.

Web browser screen illustration

3Select the user to install the certificate, and then click [Change] on the [Detail Input] tab.

Web browser screen illustration

4In the "Email" category, specify the necessary settings.

Web browser screen illustration
  • Email Address: Enter the e-mail address of the user.

  • User Certificate: Click [Change] and specify the user certificate to use.

5Click [OK].

6After completing the configuration, click [OK] and exit the Web browser.

Use the following procedure to specify the details of encryption to be enabled.

Configuring the encryption algorithm and attachment of an electronic signature

1Log in to the machine as the network administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [S/MIME] in "Security".

4Configure the e-mail encryption and electronic signature.

Web browser screen illustration

Encryption

  • Encryption Algorithm: Select the encryption algorithm of the shared key used to encrypt e-mails with S/MIME. Select the encryption algorithm that is supported by the user's e-mail software.

Signature

  • Certificate Status: The certificate specified for S/MIME is displayed.

  • Digest Algorithm: Select the digest algorithm to use for the electronic signature.

  • When Sending Email by Scanner, When Transferring by Fax, When Sending Email by Fax, When Emailing TX Results by Fax, When Transferring Files Stored in Document Server (Utility): Specify whether to select the method for attaching an electronic signature in each function when sending or transferring e-mails or documents.

Operation Mode

  • Operation Mode: Select the timing at which the validity period of a certificate is checked.

    • Security Priority: The validity period is checked when you select the address and when you press [Start]. It takes some time to respond to the user and performs properly under the conditions that meet the International Evaluation Regulations for Information Security (CC Authentication).

    • Performance Priority: The validity period of a user certificate is checked when you select the address. The validity period of a device certificate is checked when you press [Start]. It does not meet the International Evaluation Regulations for Information Security (CC Authentication), but it responds to the user quicker than when [Security Priority] is selected.

5Click [OK].

6After completing the configuration, click [OK] and exit the Web browser.

Note

  • When attaching an electronic signature to an e-mail, the e-mail address of the administrator is used in "From", and the e-mail address of the user selected as "Sender" is used in "Reply-To".

  • If an error occurs outside the validity period of the certificate when an e-mail is sent automatically using Memory Transmission or at a specified time, an error will be reported by clear text e-mail to the e-mail address of the sender or administrator. When the job log collection function is enabled, you can view the error details in the job log.

Encrypting Data Communicated with Machine Management Software Via SNMPv3 (Settings Screen Type: Standard)

When monitoring devices using Device Manager NX via a network, you can encrypt the transmitted data by using the SNMPv3 protocol.

Illustration of encrypting data communicated with machine management software Via SNMPv3

1Log in to the machine as the network administrator on the control panel.

Logging in to the Machine as the Administrator

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [System Settings].

Operation panel screen illustration

4Press [Network/Interface][Permit SNMPv3 Communication].

5From the list next to Permit SNMPv3 Communication, select [Encryption Only].

Operation panel screen illustration

6Press [OK].

7Press [Home] (Operation panel screen illustration), and then log out of the machine.

Note

  • To change the settings specified in the machine from Device Manager NX, specify an encryption password to the network administrator in [Program/Change Administrator], and then register the encryption password in the SNMP account of Device Manager NX.

Encrypting the Login Password of Print Jobs (Settings Screen Type: Standard)

You can encrypt the login password for the printer driver and the password for IPP printing to increase security against password cracking.

Illustration of encrypting the login password of print jobs
  • To perform printing from a LAN inside the office, specify the driver encryption key.

  • To perform IPP printing from an external network, encrypt the password of IPP printing.

Specifying a Driver Encryption Key to Encrypt Passwords

Specify the driver encryption key specified in the machine also to the printer driver to encrypt and decrypt passwords.

1Log in to the machine as the network administrator on the control panel.

Logging in to the Machine as the Administrator

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [System Settings].

Operation panel screen illustration

4Press [Settings for Administrator][Security][Extended Security Settings].

5Press [Change] next to Driver Encryption Key.

Operation panel screen illustration

6Enter the password to be used as the driver encryption key, and then press [Done].

7Enter the password for "Confirm Password" again, and then press [Done].

8Press [OK] twice.

9Press [Home] (Operation panel screen illustration), and then log out of the machine.

10The network administrator must give users the driver encryption key specified on the machine so they can register it on their computers.

  • Make sure to enter the same driver encryption key as that specified on the machine.

  • When using a PCL 6 printer driver, you can enter the driver encryption key on [Printer Properties] [Advanced Options] tab.

Note

  • You can also encrypt the print job itself. For details, see the section below.

  • Storing Documents to Print in the Machine

  • For details about specifying the encryption key on the printer driver or TWAIN driver, see the driver help.

  • For details about specifying the encryption key on the LAN-Fax driver, see the LAN-Fax driver Help.

Encrypting the password of IPP printing

When printing using the IPP protocol, specify the authentication method to [DIGEST] to encrypt the IPP authentication password. Register the user name and password for IPP authentication separately from the user information in the address book.

1Log in to the machine as the network administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [IPP Authentication] in the "Security" category.

4Select "DIGEST" on "Authentication".

Web browser screen illustration

5Enter User Name and Password.

If you want to use the user authentication information specified on the machine instead of the user name and password, click [On] for "User Authentication Function of Main Unit". You can use this function in the machines installed with RICOH Always Current Technology v1.2 or later.

6Click [OK].

7After completing the configuration, exit the Web browser.

Encrypting Data Communicated with Machine Management Software Via SNMPv3 (Settings Screen Type: Classic)

When monitoring devices using Device Manager NX via a network, you can encrypt the transmitted data by using the SNMPv3 protocol.

1Log in to the machine as the network administrator from the control panel.

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [Machine Features Settings].

Operation panel screen illustration

4Press [System Settings][Interface Settings] tab [Permit SNMPv3 Communication] to display the setting screen.

5Press [Encryption Only].

Operation panel screen illustration

6Press [OK].

7After completing the configuration, press Home (Operation panel screen illustration).

Note

  • To change the settings specified in the machine from Device Manager NX, specify an encryption password to the network administrator in [Program/Change Administrator], and then register the encryption password in the SNMP account of Device Manager NX.

Encrypting the Login Password of Print Jobs (Settings Screen Type: Classic)

You can encrypt the login password for the printer driver and the password for IPP printing to increase security against password cracking.

  • To perform printing from a LAN inside the office, specify the driver encryption key.

  • To perform IPP printing from an external network, encrypt the password of IPP printing.

Specifying a Driver Encryption Key to Encrypt Passwords

Specify the driver encryption key specified in the machine also to the printer driver to encrypt and decrypt passwords.

1Log in to the machine as the network administrator from the control panel.

2On the Home screen, press [Settings].

Operation panel screen illustration

3On the Settings screen, press [Machine Features Settings].

Operation panel screen illustration

4Press [System Settings][Administrator Tools] tab [Extended Security] to display the setting screen.

5Press [Change] for "Driver Encryption Key".

Operation panel screen illustration

6Enter a character string to use as the driver encryption key, and then press [OK].

7Press [OK].

8After completing the configuration, press Home (Operation panel screen illustration).

9The network administrator must give users the driver encryption key specified on the machine so they can register it on their computers.

  • Make sure to enter the same driver encryption key as that specified on the machine.

  • When using an PCL 6 printer driver, you can enter the driver encryption key on [Printer Properties] [Advanced Options] tab.

Note

Encrypting the password of IPP printing

When printing using the IPP protocol, specify the authentication method to [DIGEST] to encrypt the IPP authentication password. Register the user name and password for IPP authentication separately from the user information in the address book.

1Log in to the machine as the network administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [IPP Authentication] in the "Security" category.

4Select "DIGEST" on "Authentication".

Web browser screen illustration

5Enter User Name and Password.

If you want to use the user authentication information specified on the machine instead of the user name and password, click [On] for "User Authentication Function of Main Unit". You can use this function in the machines installed with RICOH Always Current Technology v1.2 or later.

6Click [OK].

7After completing the configuration, exit the Web browser.

Encrypting Communication Between KDC and the Machine

You can encrypt communications between the machine and the Key Distribution Center (KDC) server when using Kerberos authentication with Windows or LDAP authentication to secure communication.

The supported encryption algorithm differs depending on the type of KDC server.

1Log in to the machine as the machine administrator from Web Image Monitor.

2Click [Configuration] from the [Device Management] menu.

Web browser screen illustration

3Click [Kerberos Authentication] of the "Device Settings" category.

4Select the encryption algorithm to enable.

Web browser screen illustration
  • Only Heimdal supports DES3-CBC-SHA1.

  • To use DES-CBC-MD5 in Windows Server 2008 R2 or later, enable it in the operating system settings.

5Click [OK] and exit the Web browser.