Changing the Parameter Settings
"Parameters" refer to the switches that configures various features in the Fax function. You can specify the detailed settings regarding the behavior of the machine when printing a received fax or when sending or receiving a fax.
How to operate on the parameter settings screen
Each switch of a parameter 8 "bits" of [0] to [7], and a function is assigned to each bit number. To switch the setting, press each bit number and change the current value to "0" or "1".
When configuring the settings, see the following section:
Attach the option to configure or enable/disable the function before changing each switch of a parameter.
Log in to the machine as the machine administrator on the control panel.
On the Home screen, press [Settings].
On the Settings screen, press [Fax Settings].
Press [Detailed Initial Settings]
[Parameter Setting][Parameter Setting].
Press the switch number to change.
Press the bit number to change and specify the current value.
The value changes to "1" or "0" every time you press the number.
Press [OK].
Press [Close].
Press [Home] (
), and then log out of the machine.