User GuideIM 7000/8000/9000

Copying onto Tab Stock

You can copy onto tab stock by loading it in the paper trays.

Illustration of Copying onto tab stock

Tab stock is fed starting from the top tab.

Illustration of Copying onto tab stock
  1. Originals

  2. Tab Stock

  3. Copies

For details about the paper trays in which you can load tab stock, see the following section:

Recommended Paper Sizes and Types

For details about the procedure to load tab stock in the paper trays, see the following section:

Loading Tab Stock into Trays 2 and 3

Important

  • You cannot copy onto tab stock when Duplex Copy is enabled. If Duplex Copy is specified, press one of the following keys to cancel the setting.

  • Operation panel screen illustration

1Press [Settings] on the Hone screen.

Operation panel screen illustration

2Press [Tray/Paper Settings].

Operation panel screen illustration

3Press [Paper Size/Paper Type] (tray name) [Paper Size], and then specify the paper size for tab stock.

4Press [OK].

5Press [Paper Type/Thickness], and then select Tab Stock for "Paper Type".

6Press [OK].

7Press [Tab Position Shift], and then specify the amount to shift the copying position toward the tab side.

Illustration of tab position shift
  1. Original width

  2. Amount to shift

8Press [OK].

9Press [Home] () after specifying the settings.

10Press [Copy] on the Home screen.

Operation panel screen illustration

11Press [Paper Select] and select the tray in which tab stock is loaded.

13Press [Start].

Note

  • Check the position of the index tab to avoid cropping the image. If the image extends beyond the index tab, the backs of sheets may get soiled with toner.

  • When a paper jam has occurred, check the order of originals and tab stock, and then restart copying.