User GuideIM 7000/8000/9000

Copying Both Sides of an ID Card onto a Single Page

You can copy the front and back sides of a small original such as an ID card or name card onto one side of a sheet of paper (ID card copy).

Illustration of ID card copy

You can also copy an ID card by pressing "ID Card Copy" on the Home screen. This section describes how to copy on the Copy screen.

Important

  • You cannot specify the ID card copy together with the Duplex Copy. If the Duplex Copy is specified, press one of the following keys to cancel the setting.

  • Operation panel screen illustration
  • Some parts of the images may not be copied when you specify a reproduction ratio, depending on where you place the original. You can reduce the area that is not copied by placing the original on the upper left corner of the exposure glass.

    • Scanning area when copying onto A4 (81/2 × 11)Landscape at 100%.

      Illustration of ID card copy
    • Scanning area when copying onto A4 (81/2 × 11)Landscape at 200%.

      Illustration of ID card copy

1Press [Copy] on the Home screen.

Operation panel screen illustration

2Press [ID Card Copy] on the Copy screen.

Operation panel screen illustration
  • If the key is not displayed, register [ID Card Copy], by using [Customize Function: Copy (Standard Mode)] or [Customize Function: Copy (All View Mode)].

    Others (Copier / Document Server Settings)

  • When you press [ID Card Copy], the setting of [Paper Select] changes automatically. To copy on a different paper, change the setting.

3Press [ID Card CopyTo Next].

Operation panel screen illustration

4Place the ID card with the front side facing down on the exposure glass.

  • When copying onto paper in portrait orientation (Portrait), place the ID card in landscape orientation and in the center of the scan area that is half the size of the paper to copy onto.

    Example: To copy onto A4 (81/2 × 11) Portrait size paper, place the card in the center of the scan area for A5 (51/2 × 81/2) Landscape size original.

    Illustration of ID card in portrait orientation
  • When copying onto paper in landscape orientation (Landscape), place the card in portrait orientation and in the center of the scan area that is half the size of the paper to copy onto.

    Example: To copy onto A4 (81/2 × 11) Landscape size paper, place the card in the center of the scan area for A5 (51/2 × 81/2) Portrait size original.

    Illustration of ID card copy in landscape orientation

5Press [Start].

The front side of the ID card is scanned.

6Place the ID card with the back side facing down on the exposure glass, and press [Start].

Place the ID card in the same scan area as the front side. When you press Start, the back side of the ID card is scanned.

Illustration of ID card copy in portrait and landscape orientation

7Press [Finish].

To copy the next ID card, press [Continue Copying].