route

Use the "route" command to view and control the routing table.

The maximum number of IPv4 routing tables is 16. The maximum number of IPv6 routing tables is 2.

Set a gateway address when communicating with devices on an external network. The same gateway address is shared by all interfaces.

Specified route information display

msh> route get "destination"

Specify the IPv4 address to destination.
"0.0.0.0" cannot be specified as the destination address.

Enabling/disabling specified IPv4 destination

msh> route active {host|net} "destination" {on|off}

Adding IPv4 routing table

msh> route add {host|net} "destination" "gateway"

Add a host or network route to "destination", and a gateway address to "gateway" in the table.
Specify the IPv4 address to destination and gateway.
If you do not specify {host|net}, the host setting is selected automatically.
You cannot specify "0.0.0.0" as the destination address.

Setting the Default IPv4 gateway

msh> route add default {gateway}

Deleting specified IPv4 destination from routing table

msh> route delete {host|net} "destination"

Setting IPv6 default gateway

msh> route add6 default "gateway"

Adding a specified IPv6 destination to routing table

msh> route add6 "destination" "prefixlen[1–128]" "gateway"

Specify the IPv6 address to destination and gateway.
If the prefix of the address is between 1 and 127, the network is selected. If the prefix of the address is 128, the host is selected.
You cannot register a record that has the same destination and prefix as a registered record.
You cannot register a record that uses "0000:0000:0000:0000:0000:0000:0000:0000" as its destination.

Deleting a specified IPv6 destination from routing table

msh> route delete6 "destination" "prefixlen"

Displaying information about a specified IPv6 route information

msh> route get6 "destination"

Enabling/disabling a specified IPv6 destination

msh> route active6 "destination" "prefixlen[1–128]" {on|off}

Route initialization

msh> route flush