Output Tray

This section describes the settings in [Output Tray] under [System Settings].

Setting Items	Description
Output Tray: Copier	Specify a tray to which documents are delivered. Default: [Copy Tray]
Output Tray: Document Server	Specify a tray to which documents are delivered. Default: [Copy Tray]
Specify Tray for Lines	Select whether to specify a tray to eject the printed sheets of the received document per line type and sender (telephone line, Internet Fax, or IP-Fax). Default: [Off]
Output Tray: Fax	Specify a tray to which documents are delivered. Default: [Copy Tray]
Output Tray: Printer	Specify a tray to which documents are delivered. Default: [Copy Tray]
Finisher Output Tray Setting	Use this setting to switch between [According to Function Setting] and [Auto Change]. This setting appears only when Finisher SR5090, Booklet Finisher SR5100, or Booklet Finisher SR5120 is attached to the machine. Output Tray Auto Change is available only when "Interleave Priority" is set to [Job Order]. According to Function Setting Auto Change Default: [According to Function Setting] Output Method to Finisher Stack Jobs Do not Stack Jobs Default: [Stack Jobs] Output Settings when Finisher is Full This setting is available only when "Output Tray" is set to [Auto Change]. Auto Detect Priority Finisher Default: [Auto Detect]

Note

The output tray depends on the installed options.
Supported Output Tray

Supported Output Tray

You can specify the output tray for [Output Tray: Copier], [Output Tray: Document Server], [Output Tray: Fax], or [Output Tray: Printer]. The output tray name displayed on the control panel and the corresponding output tray are as described below:

No.	Displayed Name	Output Tray
1	Copy Tray	Copy Tray
2	Finisher Upper Tray	Finisher Upper Tray
3	Finisher Shift Tray	Finisher Shift Tray
4	Finisher Shift Tray 1	Finisher Shift Tray 1
5	Finisher Shift Tray 2	Finisher Shift Tray 2