List of Specifications

Specifications for the Main Unit

Item	Specifications
Configuration	Desktop
Memory	6 GB (2 GB on the main unit and 4 GB on the control panel)
Internal storage size	256 GB (When SSD option is installed)
Color	Full Color
Photosensitivity type	OPC drum
Print process	Laser beam scanning and electro-photographic printing
Exposure glass	-
Scan method	-
Warm-up time	Quick mode: 21 seconds (23 °C (73.4 °F), rated voltage)
First print time	Full color: 5.2 seconds / B&W: 3.2 seconds
Print speed (per minute)	45 sheets/minute (A4, 8¹/₂ × 11)
Maximum original size	-
Original scanning area	-
Originals	-
Paper size	Trays 1–2 and the bypass tray: Recommended Paper Sizes and Types Duplex: A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂, 8K, 16K, 12 × 18, 11 × 15, 10 × 14, SRA3, SRA4, 8¹/₂ × 13²/₅ Duplex (Custom Size): Vertical: 90.0–320.0 mm (3.55–12.59 inches) Horizontal: 148.0–457.2 mm (5.83–18.00 inches)
Paper weight	Trays 1–2 and the bypass tray: Recommended Paper Sizes and Types Duplex: 52–256 g/m² (Approx. 14 lb. Bond–140 lb. Index)^1 For details about and recommendations concerning thick paper, see Thick Paper Orientation and Recommended Status. 1 Paper types that cannot be used for two-sided/book print: envelopes, label paper, matte coated paper, and glossy coated paper
Missing image area	Leading edge: 4.2 ±1.5 mm (0.17 ±0.06 inches) Trailing edge: 0.5–6.0 mm (0.02–0.24 inches) Trailing edge (Banner sheet): 0.5–10.0 mm (0.02–0.4 inches) Right edge: 0.5–4.0 mm (0.02–0.16 inches) Left edge: 0.5–4.0 mm (0.02–0.16 inches)
Paper output capacity of the internal tray	A4 or smaller: 500 sheets (80 g/m²) B4 JIS or larger: 250 sheets (80 g/m²)
Preset reproduction ratio	-
Reproduction ratio (zoom)	-
Resolution (scanning originals)	-
Resolution (copying)	-
Tone	-
Paper capacity (80 g/m², Approx. 20 lb. Bond)	Recommended Paper Sizes and Types
Continuous copy run	-
Duplex	Standard
Power requirements	(mainly Europe and Asia) 220-240 V, 8 A, 50/60 Hz (mainly North America) 120–127 V, 12 A, 60 Hz
Power consumption (Main unit only)	(mainly Europe and Asia) Ready: 57.4 W During printing: 571 W Maximum: 1850 W or less The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less (mainly North America) Ready: 68.7 W During printing: 587 W Maximum: 1580 W or less The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Power consumption (Complete system)	(mainly Europe and Asia) Maximum: 1850 W or less The complete system consists of the main unit, mailbox, lower paper trays, large capacity tray, internal multi-fold unit, Finisher SR3340, and attention light. (mainly North America) Maximum: 1580 W or less The complete system consists of the main unit, mailbox, lower paper trays, large capacity tray, internal multi-fold unit, Finisher SR3340, and attention light.
Dimensions	W × D × H: 587 × 701 × 779 mm (23.2 × 27.6 × 30.7 inches) (When the control panel is horizontal)
Space for main unit (W × D)	1,104 × 701 mm (43.5 × 27.6 inches) or less (When the bypass tray, external bypass tray, and output trays are open.)
Noise emission (Sound power level: Main unit only)	Stand-by: 17.2 dB Printing: 63.3 dB
Noise emission (Sound power level: Complete system)	Stand-by: 19.0 dB Printing: 69.3 dB
Noise emission (Sound pressure level: Main unit only)	Stand-by: 3.1 dB Printing: 48.3 dB
Noise emission (Sound pressure level: Complete system)	Stand-by: 3.0 dB Printing: 54.4 dB
Noise emission (Sound pressure level)	Sound power levels and sound pressure levels are actual values measured in accordance with ISO 7779. Sound pressure levels are measured from the position of the bystander. The complete system consists of the main unit, bridge unit, lower paper trays, large capacity tray, Finisher SR3340, and mailbox.
Weight	Approx. 81 kg (178.6 lb.)

Section Top

Specifications for Printer

Item	Specifications
Printing speed	45 sheets/minute (A4, 8¹/₂ × 11, plain paper, one-side printing)
Resolution	200 dpi, 300 dpi, 400 dpi, 600 dpi, 1,200 dpi
Printer language	Standard: PCL5c/6(XL), PostScript 3 Emulation, PDF Emulation, MediaPrint (TIFF) Option: Genuine Adobe PostScript 3, PDF Direct from Adobe, IPDS, XPS
Interface	Standard: Ethernet (10BASE-T/100BASE-TX/1000BASE-T) USB3.2 Gen1 (Type B) port USB2.0 (Type A) port (on the control panel) Option: IEEE 802.11a/b/g/n/ac wireless LAN interface Device Server option
Network protocol	TCP/IP (IPv4, IPv6)
USB interface	Transmission spec: USB2.0, USB3.2 Gen1 Standard Connectable device: Devices corresponding to USB2.0, USB3.2 Gen1 Standard
Operating system	Windows 8.1/10/11 Windows Server 2012/2012 R2/2016/2019/2022 macOS 11 or later
Fonts	PCL 5c/6(XL): 80 fonts, 13 International fonts PostScript 3 Emulation: 80 fonts, 13 International fonts PDF Emulation: 80 fonts, 13 International fonts Genuine Adobe PDF: 136 fonts Genuine Adobe PostScript 3: 136 fonts IPDS: 108 fonts
Store function	Total number of documents that can be stored: Up to 100 documents Number of pages for each document that can be stored: Up to 1,000 pages Total number of pages of all documents that can be stored: Up to 9,000 pages
Sort function	Number of pages that can be sorted: Up to 1,000 pages Number of copies that can be sorted: Up to 999 copies

Note

To connect the machine to the network, use a LAN cable supporting 1000BASE-T, 100BASE-TX, and 10BASE-T. The maximum length for the cable connecting the machine to an Ethernet network is 100 meters.

Section Top

Specifications for Finisher SR3320

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Paper size for the finisher upper tray	A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA3, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight for the finisher upper tray	52-169 g/m² (Approx. 14 lb. Bond-90 lb. Index)
Stack capacity for the finisher upper tray (80 g/m², Approx. 20 Bond)	250 sheets : A4, 8¹/₂ × 11 or smaller 50 sheets: B4 JIS, 8¹/₂ × 14 or larger
Paper size for the finisher shift tray	A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA3, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight for the finisher shift tray (without staple)	52-300 g/m² (Approx. 14 lb. Bond-110 lb. Cover)
Paper sizes that can be shifted when delivered to the finisher shift tray	A3, B4 JIS, A4, B5 JIS, A5, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ _,8K, 16K, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight that can be shifted when delivered to the finisher shift tray	52-300 g/m² (Approx. 14 lb. Bond-110 lb. Cover)
Stack capacity for the finisher shift tray (80 g/m², Approx. 20 Bond)	1,000 sheets: A4, 8¹/₂ × 11 or smaller: 500 sheets: B4 JIS, 8¹/₂ × 14 or larger:
Staple paper size	A3, B4 JIS, A4, B5 JIS, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 8K, 16K, 12 × 18, SRA4, 8¹/₂ × 13²/₅ , custom size
Staple paper weight	Staple: 52-220 g/m² (Approx. 14 lb. Bond-80 lb. Cover) ^*1 Staple-free staple: 64-80 g/m² (Approx. 17-20 lb. Bond)
Staple capacity (80 g/m², Approx. 20 lb. Bond)	Staple: Without Mixed Size: 30 sheets: A3, B4 JIS, 11 × 17, 8¹/₂ × 14, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 14, 8¹/₄ × 13, 11 × 15, 10 × 14, 8K, 12 × 18, SRA4, 8¹/₂ × 13²/₅ 50 sheets: A4, B5 JIS, 8¹/₂ × 11, 8 × 10, 7¹/₄ × 10¹/₂, 16K With Mixed Size: 22 sheets: A3/A4, B4 JIS/B5 JIS, 11 × 17/8¹/₂ × 11 Staple-free staple: 5 sheets: A3, A4, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 7¹/₄ × 10¹/₂, 8K, 16K, 12 × 18, 8¹/₂ × 13²/₅ The number of sheets that can be stapled varies depending on the paper weight setting.
Stack capacity after stapling (80 g/m², Approx. 20 lb. Bond)	Staple: 2–9 sheets: 100 sets (A4, B5 JIS, 8¹/₂ × 11) 10–50 sheets: 100–20 sets (A4, B5 JIS, 8¹/₂ × 11) 10–50 sheets: 50–10 sets (A4, B5 JIS, 8¹/₂ × 11) 2–9 sheets: 50 sets (A3, A4, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11) 10–30 sheets: 50–10 sets (A3, B4 JIS, 11 × 17, 8¹/₂ × 14) 2–22 sheets: 22 sets (With Mixed Size:A3/A4, B4 JIS/B5 JIS, 11 × 17/8¹/₂ × 11) Staple-free staple: 2–5 sheets: 100 sets (A4, B5 JIS, 8¹/₂ × 11) 2–5 sheets: 50 sets (A3, A4, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11)
Staple position	Staple: 3 positions (Top, Bottom, 2 Staples) Staple-free staple: Slant
Power requirements	Power is supplied from the main unit.
Maximum power consumption	36 W or less
Dimensions (W × D × H)	575 × 665 × 960 mm (22.7 × 26.2 × 37.8 inches) (Tray is folded.) 660 × 665 × 960 mm (26.0 × 26.2 × 37.8 inches) (Tray is extended.) (the height to reach the top board)
Weight	Approx. 34 kg (75.0 lb.)

*1 You can use two sheets of paper weighing up to 216 g/m² (Approx. 80 lb. Cover) per set as cover sheets.

Section Top

Specifications for Booklet Finisher SR3330

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Paper size for the finisher upper tray	A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA3, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight for the finisher upper tray	52-169 g/m² (Approx. 14 lb. Bond-90 lb. Index)
Stack capacity for the finisher upper tray (80 g/m², Approx. 20 lb. Bond)	250 sheets : A4, 8¹/₂ × 11 or smaller 50 sheets: B4 JIS, 8¹/₂ × 14 or larger
Paper size for the finisher shift tray	A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA3, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight for the finisher shift tray	52-300 g/m² (Approx. 14 lb. Bond-110 lb. Cover)
Paper sizes that can be shifted when delivered to the finisher shift tray	A3, B4 JIS, A4, B5 JIS, A5, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight that can be shifted when delivered to the finisher shift tray	52-300 g/m² (Approx. 14 lb. Bond-110 lb. Cover)
Stack capacity for the finisher shift tray (80 g/m², Approx. 20 lb. Bond)	1,000 sheets: A4, 8¹/₂ × 11 or smaller: 500 sheets: B4 JIS, 8¹/₂ × 14 or larger:
Staple paper size	A3, B4 JIS, A4, B5 JIS, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 8K, 16K, 12 × 18, SRA4, 8¹/₂ × 13²/₅ , custom size
Staple paper weight	52-220 g/m² (Approx. 14 lb. Bond-80 lb. Cover) You can use two sheets of paper weighing up to 216 g/m² (Approx. 80 lb. Cover) per set as cover sheets.
Staple capacity (80 g/m², Approx. 20 lb. Bond)	Without Mixed Size: 30 sheets: A3, B4 JIS, 11 × 17, 8¹/₂ × 14, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 14, 8¹/₄ × 13, 11 × 15, 10 × 14, 8K, 12 × 18, SRA4, 8¹/₂ × 13²/₅ 50 sheets: A4, B5 JIS, 8¹/₂ × 11, 8 × 10, 7¹/₄ × 10¹/₂, 16K With Mixed Size: 22 sheets: A3/A4, B4 JIS/B5 JIS, 11 × 17/8¹/₂ × 11 The number of sheets that can be stapled varies depending on the paper weight setting.
Stack capacity after stapling (80 g/m², Approx. 20 lb. Bond)	Without Mixed Size: 2–9 sheets: 100 sets (A4, B5 JIS, 8¹/₂ × 11) 10–50 sheets: 100–20 sets (A4, B5 JIS, 8¹/₂ × 11) 10–50 sheets: 50–10 sets (A4, B5 JIS, 8¹/₂ × 11) 2–9 sheets: 50 sets (A3, A4, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11) 10–30 sheets: 50–10 sets (A3, B4 JIS, 11 × 17, 8¹/₂ × 14) With Mixed Size: 2–22 sheets: 22 sets (A3 /A4, B4 JIS /B5 JIS, 11 × 17 /8¹/₂ × 11)
Staple position	3 positions (Top, Bottom, 2 Staples)
Saddle stitch paper size	A3, A4, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 12 × 18
Saddle stitch paper weight	52-105 g/m² (Approx. 14-28 lb. Bond) You can use two sheets of paper weighing up to 105 g/m² (Approx. 28 lb. Bond) per set as cover sheets.
Saddle stitch capacity (80 g/m², Approx. 20 lb. Bond)	1 set (15 sheets)
Stack capacity after saddle stitching (80 g/m², Approx. 20 lb. Bond)	2-5 sheets: approx. 20 sets 6-10 sheets: approx. 10 sets 11-15 sheets: approx. 7 sets (Stack capacity depends on the paper type and use conditions.)
Saddle stitch position	Center 2 positions
Types of folds	Half Fold
Half fold paper size	A3, A4, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 12 × 18, 8¹/₂ × 13²/₅
Half fold paper weight	52-105 g/m² (Approx. 14-28 lb. Bond)
Half fold paper type	Plain 1, Plain 2, Recycled Paper, Middle Thick, Thin Paper, Color Paper
Power requirements	Power is supplied from the main unit.
Maximum power consumption	36 W or less
Dimensions (W × D × H)	575 × 620 × 960 mm (22.7 × 24.5 × 37.8 inches) (Tray is folded.) 660 × 620 × 960 mm (26.0 × 24.5 × 37.8 inches) (Tray is extended.) (the height to reach the top board)
Weight	Approx. 44 kg (97.1 lb.)

Note

The Half Fold function can fold one sheet at a time.

Section Top

Specifications for Finisher SR3340

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Paper size for the finisher upper tray	A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA3, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight for the finisher upper tray	52-220 g/m² (Approx. 14 lb. Bond-80 lb. Cover)
Stack capacity for the finisher upper tray (80 g/m², Approx. 20 lb. Bond)	250 sheets : A4, 8¹/₂ × 11 or smaller 50 sheets: B4 JIS, 8¹/₂ × 14 or larger
Paper size for the finisher shift tray:	A3, B4 JIS, A4, B5 JIS, A5, B6 JIS, A6, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA3, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight for the finisher shift tray (without staple)	52-300 g/m² (Approx. 14 lb. Bond-110 lb. Cover)
Paper sizes that can be shifted when delivered to the finisher shift tray	A3, B4 JIS, A4, B5 JIS, A5, 12 × 18, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight that can be shifted when delivered to the finisher shift tray	52-300 g/m² (Approx. 14 lb. Bond-110 lb. Cover)
Stack capacity for the finisher shift tray (80 g/m², Approx. 20 lb. Bond)	3,000 sheets: A4, 8¹/₂ × 11 1,500 sheets: A3, B4 JIS, A4, B5 JIS, 12 × 18, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, SRA3 500 sheets: A5 100 sheets: A5, A6, B6 JIS, 5¹/₂ × 8¹/₂
Staple paper size	A3, B4 JIS, A4, B5 JIS, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 8K, 16K, SRA4, 8¹/₂ × 13²/₅ , custom size When using staple-free staples, the following paper sizes cannot be used for double stitch: B5 JIS, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 16K
Staple paper weight	Staple 52-105 g/m² (Approx. 14-28 lb. Bond) You can use two sheets of paper weighing up to 256 g/m² (Approx. 140 lb. Index) per set as cover sheets. Staple-free staple 64-80 g/m² (Approx. 17-20 lb. Bond)
Staple capacity (80 g/m², Approx. 20 lb. Bond)	Staple Without Mixed Size: 65 sheets: A3, B4 JIS, A4, B5 JIS, 11 × 17, 11 × 15, 10 × 14, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 8K, 16K, SRA4, 8¹/₂ × 13²/₅ With Mixed Size: 65 sheets: A3/A4, B4 JIS/B5 JIS, 11 × 17/8¹/₂ × 11 Staple-free staple (Slant) Without Mixed Size: 5 sheets: A3, A4, B4 JIS, B5 JIS, 11 × 17,8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 8K, 16K, 11 × 15, 10 × 14, SRA4, 8¹/₂ × 13²/₅ With Mixed Size: 5 sheets: A3/A4, B4 JIS/B5 JIS, 11 × 17/8¹/₂ × 11 Staple-free staple (2 Staples) Without Mixed Size: 4 sheets: A3, A4, B4 JIS, B5 JIS, 11 × 17,8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 7¹/₄ × 10¹/₂, 8K, 16K, 11 × 15, 10 × 14, SRA4, 8¹/₂ × 13²/₅ With Mixed Size: 4 sheets: A3/A4, B4 JIS/B5 JIS, 11 × 17/8¹/₂ × 11 The number of sheets that can be stapled varies depending on the paper weight setting.
Stack capacity after stapling (80 g/m², Approx. 20 lb. Bond)	Staple Without Mixed Size: 2–19 sheets: 150 sets (A4, 8¹/₂ × 11) 20–65 sheets: 150–46 sets (A4, 8¹/₂ × 11) 2–14 sheets: 100 sets (A4, B5 JIS, 8¹/₂ × 11) 15–65 sheets: 100–23 sets (A4, B5 JIS, 8¹/₂ × 11) 2–14 sheets: 100 sets (other size paper) 15–65 sheets: 100–23 sets (other size paper) With Mixed Size: 2–65 sheets: 30 sets (A3/A4, B4 JIS/B5 JIS, 11 × 17/8¹/₂ × 11) Staple-free staple 2–5 sheets: 150 sets (A4, 8¹/₂ × 11) 2–5 sheets: 100 sets (A4, B5 JIS, 8¹/₂ × 11) 2–5 sheets: 100 sets (other size paper)
Staple position	Staple 5 positions (Top, Top Slant, Slant, Bottom, 2 Staples) Staple-free staple 2 positions (Slant, 2 Staples)
Power requirements	Power is supplied from the main unit.
Maximum power consumption	64 W or less
Dimensions (W × D × H)	651 × 670 × 960 mm (25.7 × 26.4 × 37.8 inches) (Tray is folded.) 754 × 670 × 960 mm (29.7 × 26.4 × 37.8 inches) (Tray is extended.) (the height to reach the top board)
Weight	Approx. 36 kg (79.4 lb.) (without punch unit) Approx. 39 kg (86.0 lb.) (with punch unit)

Section Top

Specifications for Internal Multi-Fold Unit

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Paper size	When only the internal multi-fold unit is attached A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ ,8K, 16K, 11 × 15, 10 × 14, SRA4, 8¹/₂ × 13²/₅ , custom size When the Finisher is attached A3, A4, A5, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 8K, 16K, 8¹/₂ × 13²/₅ , custom size
Types of folds	Half Fold, Letter Fold-out, Letter Fold-in, Z-fold
Fold paper size	Z-fold A3, A4, B4 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 8K, 8¹/₂ × 13²/₅ Half Fold A3, A4, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 8K, 12 × 18, SRA3, 8¹/₂ × 13²/₅ When only the internal multi-fold unit is mounted, you cannot use the paper whose size is 12 × 18 or SRA3. Letter Fold-out, Letter Fold-in 1 sheet: A3, A4, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 8¹/₂ × 13²/₅ 2-3 sheets: A4, 8¹/₂ × 11
Fold paper weight:	1 sheet: 64-105 g/m² (Approx. 17-28 lb. Bond) 2-3 sheets: 64-80 g/m² (Approx. 17-20 lb. Bond)
Paper weight that can be output	When only the internal multi-fold unit is attached 52–220 g/m² (Approx. 14 lb. Bond–80 lb. Cover) When the Finisher is attached 52–300 g/m² (Approx. 14 lb. Bond–110 lb. Cover)
Folded paper output tray^*1	Finisher SR3340 Z-fold, half fold: Finisher shift tray, finisher upper tray, fold tray Letter fold-out, letter fold-in: Fold tray, finisher upper tray (A3, 11 × 17) Finisher SR3320, Booklet Finisher SR3330 Z-fold, half fold: Finisher upper tray, fold tray Letter fold-out, letter fold-in: Fold tray, finisher upper tray (A3, 11 × 17)
Power requirements	Power is supplied from the main unit.
Maximum power consumption	40 W or less
Dimensions (W × D × H)	612 × 555 × 184 mm (24.1 × 21.9 × 7.3 inches): when the tray is folded 714 × 555 × 242 mm (28.2 × 21.9 × 9.6 inches): when the tray is pulled out 420 × 555 × 152 mm (16.6 × 21.9 × 6.0 inches): when the finisher is mounted
Weight	Approx. 16 kg (35.3 lb.)

*1 Specify the output tray using the Machine Features Settings.

Output Tray

Note

When the finisher is attached, the not-folded sheets are output to the folding tray of the attached finisher only in the following cases:
- When Z-fold sheets (A3, 11 × 17) and non-fold sheets (A4, 8¹/₂ × 11) are output at once
- When Z-fold sheets (A4) and non-fold sheets (A5) are output at once
- When Z-fold sheets (B4 JIS) and non-fold sheets (B5 JIS) are output at once
- When Z-fold sheets (8K) and non-fold sheets (16K) are output at once
- When envelopes are output
- When banner paper is output
When only the internal multi-fold unit is mounted, you cannot use the paper whose width is wider than 297 mm (11.7 inches).

To output envelopes or banner paper to the fold tray while the Finisher SR3340 is mounted, contact your service representative.

Section Top

Specifications for Bridge Unit

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Stack capacity	250 sheets: A4, 8¹/₂ × 11 or smaller 125 sheets: B4 JIS, 8¹/₂× 14 or larger
Power requirements	Power is supplied from the main unit.
Maximum power consumption	12 W or less
Dimensions (W × D × H)	412 × 466 × 143 mm (16.3 × 18.4 × 5.7 inches)
Weight	Approx. 4 kg (8.9 lb.)

Section Top

Specifications for Mailbox

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Paper size	A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂ , 4¹/₈×9¹/₂, 3⁷/₈×7¹/₂, C5 Env, C6 Env, DL Env, 8K, 16K, 11 × 15, 10 × 14, SRA4, 8¹/₂ × 13²/₅ , custom size
Paper weight	52–169 g/m² (Approx. 14 lb. Bond–90 lb. Index)
Paper capacity (80 g/m², Approx. 20 lb. Bond)	125 sheets per tray
Power requirements	Power is supplied from the main unit.
Maximum power consumption	28 W or less
Dimensions (W × D × H)	555 × 544 × 506 mm (21.9 × 21.5 × 20.0 inches)
Weight	Approx. 13 kg (28.7 lb.)

Section Top

Specifications for Punch Unit (Finisher SR3320, Booklet Finisher SR3330)

For details about the names of the options, see the following.

Abbreviated Names of Options

Punch unit type	Paper size	Paper weight
2 & 4 holes type: 2 holes	: A3, B4 JIS, A4, B5 JIS, A5, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 5¹/₂ × 8¹/₂, 7¹/₄ × 10¹/₂, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 13, 8K, 16K, 8¹/₄ × 14, 8 × 10, 11 × 15, 10 × 14, 8¹/₂ × 13²/₅	52–256 g/m² (Approx. 14 lb. Bond–140 lb. Index)
2 & 4 holes type: 2 holes	: A4, B5 JIS, A5, 8¹/₂ × 11, 7¹/₄ × 10¹/₂, 16K
2 & 4 holes type: 4 holes	: A3, B4 JIS, 11 × 17, 11 × 15, 8K
2 & 4 holes type: 4 holes	: A4, B5 JIS, 8¹/₂ × 11,7¹/₄ × 10¹/₂, 16K
4 holes type: 4 holes	: A3, B4 JIS, A4, B5 JIS, A5, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 5¹/₂ × 8¹/₂, 7¹/₄ × 10¹/₂, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 13, 8K, 16K, 8¹/₄ × 14, 8 × 10, 11 × 15, 10 × 14, 8¹/₂ × 13²/₅
4 holes type: 4 holes	: A4, B5 JIS, A5, 8¹/₂ × 11, 7¹/₄ × 10¹/₂, 16K
2 & 3 holes type: 2 holes	: A3, B4 JIS, B5 JIS, A5, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 5¹/₂ × 8¹/₂, 7¹/₄ × 10¹/₂, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 13, 8K, 16K, 8¹/₄ × 14, 8 × 10, 11 × 15, 10 × 14, 8¹/₂ × 13²/₅
2 & 3 holes type: 2 holes	: A4, B5 JIS, 8¹/₂ × 11, 7¹/₄ × 10¹/₂, 16K
2 & 3 holes type: 3 holes	: A3, B4 JIS, 11 × 17, 11 × 15, 10 × 14, 8K
2 & 3 holes type: 3 holes	: A4, B5 JIS, 8¹/₂ × 11,7¹/₄ × 10¹/₂, 16K

Section Top

Specifications for Punch Unit (Finisher SR3340)

For details about the names of the options, see the following.

Abbreviated Names of Options

Punch unit type	Paper size	Paper weight
2 & 4 holes type: 2 holes	: A3, B4 JIS, A4, B5 JIS, A5, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 5¹/₂ × 8¹/₂, 7¹/₄ × 10¹/₂, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 13, 8K, 16K, 8¹/₄ × 14, 8 × 10, 11 × 15, 10 × 14, 8¹/₂ × 13²/₅, custom size	52–256 g/m² (Approx. 14 lb. Bond–140 lb. Index)
2 & 4 holes type: 2 holes	: A4, B5 JIS, A5, 8¹/₂ × 11, 7¹/₄ × 10¹/₂, 16K, custom size
2 & 4 holes type: 4 holes	: A3, B4 JIS, 11 × 17, 11 × 15, 8K, custom size
2 & 4 holes type: 4 holes	: A4, B5 JIS, 8¹/₂ × 11,7¹/₄ × 10¹/₂, 16K, custom size
4 holes type: 4 holes	: A3, B4 JIS, A4, B5 JIS, A5, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 5¹/₂ × 8¹/₂, 7¹/₄ × 10¹/₂, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 13, 8K, 16K, 8¹/₄ × 14, 8 × 10, 11 × 15, 10 × 14, 8¹/₂ × 13²/₅, custom size
4 holes type: 4 holes	: A4, B5 JIS, A5, 8¹/₂ × 11, 7¹/₄ × 10¹/₂, 16K, custom size
2 & 3 holes type: 2 holes	: A3, B4 JIS, B5 JIS, A5, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 5¹/₂ × 8¹/₂, 7¹/₄ × 10¹/₂, 8 × 13, 8¹/₂ × 13, 8¹/₄ × 13, 8K, 16K, 8¹/₄ × 14, 8 × 10, 11 × 15, 10 × 14, 8¹/₂ × 13²/₅, custom size
2 & 3 holes type: 2 holes	: A4, B5 JIS, 8¹/₂ × 11, 7¹/₄ × 10¹/₂, 16K, custom size
2 & 3 holes type: 3 holes	: A3, B4 JIS, 11 × 17, 11 × 15, 10 × 14, 8K, custom size
2 & 3 holes type: 3 holes	: A4, B5 JIS, 8¹/₂ × 11,7¹/₄ × 10¹/₂, 16K, custom size

Section Top

Specifications for Lower Paper Tray

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Page size	Recommended Paper Sizes and Types
Paper capacity	Recommended Paper Sizes and Types
Paper weight	Recommended Paper Sizes and Types
Power requirements	Power is supplied from the main unit.
Maximum power consumption	19 W or less
Dimensions (W × D × H)	587 × 685 × 120 mm (23.2 × 27.0 × 4.8 inches) (except protruding parts)
Weight	Approx. 12 kg (26.5 lb.)

Section Top

Specifications for Lower Paper Trays

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Page size	Recommended Paper Sizes and Types
Paper capacity (80 g/m², Approx. 20 lb. Bond)	Recommended Paper Sizes and Types
Paper weight	Recommended Paper Sizes and Types
Power requirements	Power is supplied from the main unit.
Maximum power consumption	21 W or less
Dimensions (W × D × H)	Except stabilizers 587 × 685 × 247 mm (23.2 × 27.0 × 9.8 inches) (except protruding parts) With stabilizers 670 × 755 × 247 mm (26.4 × 29.8 × 9.8 inches) (including protruding parts)
Weight	Approx. 23 kg (50.8 lb.)

Section Top

Specifications for Tray 3 (LCT)

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Page size	Recommended Paper Sizes and Types
Paper capacity (80 g/m², Approx. 20 lb. Bond)	Recommended Paper Sizes and Types
Paper weight	Recommended Paper Sizes and Types
Power requirements	Power is supplied from the main unit.
Maximum power consumption	15 W or less
Dimensions (W × D × H)	Except stabilizers 587 × 685 × 247 mm (23.2 × 27.0 × 9.8 inches) (except protruding parts) With stabilizers 670 × 755 × 247 mm (26.4 × 29.8 × 9.8 inches) (including protruding parts)
Weight	Approx. 23 kg (50.8 lb.)

Section Top

Specifications for Large Capacity Tray

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Page size	Recommended Paper Sizes and Types
Paper capacity (80 g/m², Approx. 20 lb. Bond)	Recommended Paper Sizes and Types
Paper weight	Recommended Paper Sizes and Types
Power requirements	Power is supplied from the main unit.
Maximum power consumption	13 W or less
Dimensions (W × D × H)	340 × 544.5 × 290 mm (13.4 × 21.5 × 11.5 inches) (except protruding parts)
Weight	Approx. 11 kg (24.3 lb.)

Section Top

Specifications for Wireless LAN Board

Important

Note that the available channels (frequency ranges) and locations to use the wireless LAN are subject to the regulations of the country or region where the printer is used. Be sure to use the wireless LAN according to the applicable regulations.

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Transmission spec	Based on IEEE 802.11a/b/g/n/ac (wireless LAN)
Transmission rate	2.4 GHz band: 72.2 Mbps (maximum) 5 GHz band: 433.3 Mbps (maximum)
Frequency range (Center Frequency)	IEEE 802.11a 5180–5240 MHz (36, 40, 44, and 48 channels) 5260–5320 MHz (52, 56, 60, and 64 channels) 5500–5700 MHz (100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 channels) 5745–5825 MHz (149, 153, 157, 161, and 165 channels) IEEE 802.11b/g 2412–2472 MHz (1–13 channels) IEEE 802.11n HT20 2412–2472 MHz (1–13 channels) 5180–5240 MHz (36, 40, 44, and 48 channels) 5260–5320 MHz (52, 56, 60, and 64 channels) 5500–5700 MHz (100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 channels) 5745–5825 MHz (149, 153, 157, 161, and 165 channels) HT40 5190–5310 MHz (38, 46, 54, and 62 channels) 5510–5670 MHz (102, 110, 118, 126, and 134 channels) 5755–5795 MHz (151 and 159 channels) IEEE 802.11ac (VHT80) 5210–5290 MHz (42 and 58 channels) 5530–5610 MHz (106 and 122 channels) 5775 MHz (155 channel)
Transmission mode	Infrastructure mode Direct Connection Mode Direct Connection: Group Owner Mode

Note

Web Image Monitor is supported.

The transmission rates of 130 Mbps in the 2.4 GHz band is the theoretical values of the wireless LAN specification. The actual transmission rate may be lower, depending on the operating environment.

Some frequency may not be available due to regulations in each country.

You may violate the local law or regulation if you specify the wireless LAN setting incorrectly. For details, see Connecting to a Wireless LAN.

Section Top

Specifications for Device Server Option

For details about the names of the options, see the following.

Abbreviated Names of Options

Item	Specifications
Interface	Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
Operating systems	Windows 8.1/10/11, Windows Server 2012/2012 R2/2016/2019/2022 macOS 11 or later
Protocol	Port 9100, IPP, LPR IPP does not support SPL. The device server option allows simultaneous connection of up to eight sessions of printing protocols.

Section Top