Print Volume Use Limitation
Device Management > Configuration > Device Settings > Print Volume Use Limitation

Use this page to configure user print volume limits.
To specify a print volume limit for each user, configure the detailed settings on the Change User (Detail Input) or Add User (Detail Input) page.

For details about the Change User (Detail Input) page
For details about the Add User (Detail Input) page

Note

• Settings on this page can be changed by the following administrators:
  • Machine Administrator
• For details about Print Volume Use Limitation, see the operating instructions provided with the machine.

Machine Action When Limit is Reached

Machine Action When Limit is Reached

Specify how the machine responds when the user reaches his/her print volume limit.

Note

• Finish Job and Limit and Stop Job will appear only if User Authentication Management is set to User Code, Basic Authentication, Windows Authentication, or LDAP Authentication.

Print Volume Use Limitation: Unit Count Setting

A "unit" is a per-page numerical value that you can assign to color mode (Color/Black & White) and print functions (Printer/Copier). Specifying unit counts allows you to restrict user printing according to the combination of color mode (Color/Black & White) and print function (Printer/Copier). For example: if you specify a unit count of "5" for Printer/Color, a user with 100 units can print 20 sheets (20 sheets @ 5 units per sheet for the color printing). You can specify a unit count between 0 and 200. Note that if you specify "0", no unit count is applied and printing of the corresponding the print type will not be limited.

Note

• Print volume limits based on unit count cannot be applied if Allow Continue Use is selected for Machine Action When Limit is Reached.

Buttons

Refresh

Click to update the currently displayed information.

Note

• Before making the settings, click Refresh to obtain the machine's current status.

OK

Click to apply the settings.

Cancel

Click to cancel the settings.