User Authentication Management (Windows Authentication)
Device Management > Configuration > Device Settings > User Authentication Management > User Authentication Management (Windows Authentication)

Use this page to configure settings for Windows Authentication.

Note

Printer Job Authentication Settings

Configure settings for processing printer jobs under each authentication method.

Note

Printer Job Authentication

Select whether to print a job if the printer driver sending the job contains no authentication information (i.e. no user name or password).

Entire

The job is not printed if it has no authentication information.

Simple (All)

The job is printed even if it has no authentication information.

Simple (Limitation)

Authentication-based print is determined by settings configured under the following: Limitation Range (IPv4), Limitation Range (IPv6), Parallel Interface (Simple), and USB (Simple).

Limitation Range (IPv4)

Enter a range for limiting unauthenticated print jobs from IPv4 addresses. You can set up to five ranges.
Any job sent from an IPv4 address within the range entered here is printed, regardless of whether or not it is authenticated. Any unauthenticated job sent from an IPv4 address outside the entered range is not printed.

Note

Limitation Range (IPv6)

Enter a range for limiting unauthenticated print jobs from IPv6 addresses. Enter the range using a combination of start and end addresses, or a combination of base address and mask. You can set up to five ranges.
Any job sent from an IPv6 address within the range entered here is printed, regardless of whether or not it is authenticated. Any unauthenticated job sent from an IPv6 address outside the entered range is not printed.

Note

Parallel Interface (Simple)

Select whether or not to apply authentication-based print to jobs sent using the parallel interface.
Apply: unauthenticated jobs are not printed.
Do not Apply: unauthenticated jobs are printed.

Note

USB (Simple)

Select whether or not to apply authentication-based print to jobs sent using the USB interface.
Apply: unauthenticated jobs are not printed.
Do not Apply: unauthenticated jobs are printed.

Note

Windows Authentication Settings

To Top of the Page

SSL

Select whether to apply SSL encryption to information entered for user authentication.

Note

Kerberos Authentication

Select whether or not to apply Kerberos authentication.
If you select On: in Realm Name, specify the Kerberos Realm for user authentication.
If you select Off: in Domain Name, specify the domain name for user authentication.

Domain Name

Specify the target domain of User Authentication using either an FQDN (Fully Qualified Domain Name) or NetBIOS name.
Use up to 63 alphanumeric characters for an FQDN.
Use up to 15 characters for a NetBIOS name.
For example, to specify the domain name "aaa.bbb.com", enter "aaa.bbb.com" as the FQDN (no omission), or enter "aaa" as the NetBIOS name (up to the first dot).

Note

Realm Name

Specify the Kerberos realm for user authentication.

Note

Group Settings for Windows Authentication

To Top of the Page

For each group defined in the domain, specify the group name, and then select the functions that you want to allow to the group. Settings configured for the group are applied to all users belonging to it. Up to ten groups can be registered.

Note

Default Group (Group 1) Name

Displays the default group belonging to the domain specified in Domain Name.
In Available Functions, select the check boxes of the functions that you want to allow to users in the group.

Group 2 Name to Group 10 Name

Enter the name of the group defined with global scope in the domain specified in Domain Name, using up to 64 characters. Group names are case sensitive.
In Available Functions for each group, select the functions that you want to allow to users in the group.

Available Functions

Select the check boxes of the functions that you want to allow to the user.

Note

Copier: Black & White

Select whether or not to allow black & white copying to the user.

Copier: Single Color

Select whether or not to allow single color copying to the user.

Copier: Two-color

Select whether or not to allow two-color copying to the user.

Copier: Full Color

Select whether or not to allow full color copying to the user.

Color Copy Mode Limitation: Limit to Auto Color Selection

Enable or disable limiting color copying automatically to "Auto Color Selection".

Color Copy Mode Limitation: Full Color/Auto Color Selection

Enable or disable limiting color copying automatically to "Full Color" or "Auto Color Selection".

Printer: Black & White

Select whether or not to allow black & white printing to the user.

Printer: Color

Select whether or not to allow color printing to the user.

Other Function(s): Document Server

Select whether or not to allow Document Server functions to the user.

Other Function(s): Fax

Select whether or not to allow the fax function to the user.

Other Function(s): Scanner

Select whether or not to allow the scanner function to the user.

Other Function(s): Browser

Select whether or not to allow the browser function on the machine's control panel to the user.

Buttons

To Top of the Page

Refresh

Click to update the currently displayed information.

Note

OK

Click to apply the settings.

Cancel

Click to cancel the settings.

 

To Top of the Page