Select Tray
Document Server > Document Server >
List of Files to Print > Select Tray
You can make settings for the paper tray used for printing files stored in the Document Server. This page appears when you click [Select Tray] on the [List of Files to Print] page.
Note
- Options listed for [Paper Tray] depend on device type, device configuration, and paper tray settings.
Paper Tray
Select one of the following:
Auto Paper Size Select
Paper is automatically selected based on file page size.
Tray 1 to Tray n, Paper Bypass
These are the machine's input trays.
The information displayed to the right of the input tray name differs depending on the tray type.
For roll paper trays, the status icon, the equivalent regular size for the paper width, and the paper length are displayed (paper sizes are shown in mm or inches).
For regular trays, the status icon, paper size, and paper orientation are displayed.
Note
- Click [Paper Type] to check the type of paper loaded.
- Status icons are the same as those displayed in the [Status] tab on the [Home] page.
Cut Method
Select how the cut length is determined for the roll paper.
Note
- If the roll paper tray is selected for [Paper Tray], select either of the two [Regular Size] options (regular paper size cutting) or [Variable Cut] (free size cutting).
Regular Size 
The width of the roll paper is considered as the long edge of the regular size. The paper is cut at the short edge equivalent length.
Regular Size 
The width of the roll paper is considered as the short edge of the regular size. The paper is cut at the long edge equivalent length.
Variable Cut
The paper is cut at a specified length. You can specify a value between 280 and 15,000/30,000 mm (11.0 and 590.5/1,181.1 inches).
Bypass Paper
Select the paper to be set in Paper Bypass.
Note
- This is displayed only if/when supported by the machine.
Paper Size
Regular Size
Select this when setting paper horizontally on the bypass tray. Specify the paper size using the drop down menu to the right.
Regular Size
Select this when setting paper vertically on the bypass tray. Specify the paper size using the drop down menu to the right.
Custom Size
Select this to set custom size paper on the bypass tray. Using the diagram displayed on the page, enter the vertical and horizontal lengths of the paper.
Note
- Specific length and width ranges depend on the device type. If the specified size is out of range, it is automatically corrected to the maximum or minimum value when [OK] is clicked.
Special Paper
To print on special paper using Paper Bypass, select the paper type.
Buttons
[OK]
Click to save the settings and return to the [List of Files to Print] page.
Current settings are displayed under the [Select Tray] button on the [List of Files to Print] page.
[Cancel]
Click to cancel the settings and return to the [List of Files to Print] page.