Select Tray
Document Server > Document Server >
List of Files to Print > Select Tray
You can make settings for the paper tray used for printing files stored in the Document Server. This page appears when you click [Select Tray] on the [List of Files to Print] page.
Note
- Options listed for [Paper Tray] depend on device type, device configuration, and paper tray settings.
Paper Tray
Select one of the following:
Auto Paper Size Select
Paper is automatically selected based on file page size.
Tray 1 to Tray n, Bypass Tray, Large Capacity Tray
These are the machine's input trays. The status icon, paper size, and paper orientation are displayed to the right of the input tray name.
Note
- Click [Paper Type] to check the type of paper loaded.
- Status icons are the same as those displayed in the [Status] tab on the [Home] page.
- If the Interposer Tray is installed, its information is displayed but this tray cannot be selected as an input tray.
Bypass Tray Paper
Select the paper to set in the bypass tray.
Note
- This is displayed only if/when supported by the machine.
Paper Size
Off
Select this if you do not want to specify paper for the bypass tray.
Regular Size 
Select this when setting paper horizontally on the bypass tray. Specify the paper size using the drop down menu to the right.
Regular Size 
Select this when setting paper vertically on the bypass tray. Specify the paper size using the drop down menu to the right.
Custom Size
Select this to set custom size paper on the bypass tray. Using the diagram displayed on the page, enter the vertical and horizontal lengths of the paper.
Note
- Specific length and width ranges depend on the device type. If the specified size is out of range, it is automatically corrected to the maximum or minimum value when [OK] is clicked.
Special Paper
To print on special paper using Paper Bypass, select the paper type.
Tray 7 Paper
Select the paper to set in Tray 7.
Note
- This is displayed only if/when supported by the machine.
Use Current Setting
Select this to use the paper that is preset for Tray 7. You can change the paper settings for Tray 7 on the [Configuration] - [Device Settings] - [Paper] page.
Regular Size
Select this when setting paper horizontally in Tray 7. Specify the paper size using the drop down menu to the right.
Regular Size
Select this when setting paper vertically in Tray 7. Specify the paper size using the drown down menu to the right.
Custom Size
Select this to set custom size paper in Tray 7. Select this to set custom size paper on the bypass tray. Using the diagram displayed on the page, enter the vertical and horizontal lengths of the paper.
Note
- Specific length and width ranges depend on the device type. If the specified size is out of range, it is automatically corrected to the maximum or minimum value when [OK] is clicked.
Special Paper
To print on special paper loaded in Tray 7, select the paper type.
If you select tab stock paper for [Special Paper], the [Tab Position Shift] and [Number of Tabs] options are available.
Tab Position Shift
To shift print images based on the tab width, enter the shift distance using a value up to 15 mm (0.6 inches).
Number of Tabs
Enter the number of tabs per sheet. You can enter a value between 2 and 99.
Buttons
[OK]
Click to save the settings and return to the [List of Files to Print] page.
Current settings are displayed under the [Select Tray] button on the [List of Files to Print] page.
[Cancel]
Click to cancel the settings and return to the [List of Files to Print] page.