Skip header
 

Guide to Names and Functions of Components

This section introduces the names and functions of the components.

CAUTION


  • Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Front and left view

Main unit illustration numbered callout illustration

  1. ADF

    Lower the ADF over originals placed on the exposure glass.

    If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

    The ADF scans both sides of an original one side at a time.

  2. Exposure glass

    Place originals face down here.

  3. Main power switch

    To operate the machine, the main power switch must be on. If it is off, turn the switch on.

  4. Vents

    Prevent overheating.

  5. Control panel

    See Guide to the Names and Functions of the Machine's Control Panel (When Using the Standard Operation Panel) or Guide to the Names and Functions of the Machine's Control Panel (When Using the Smart Operation Panel).

  6. Finisher (Type 2 only)

    Sorts, stacks, and staples multiple sheets of paper.

  7. Internal tray 1 (Type 1 only)/Finisher shift tray (Type 2 only)

    Copied/printed paper and fax messages are delivered here.

  8. Front cover

    Open to access the inside of the machine.

  9. Tray 1

    Load paper here.

  10. Lower paper tray

    Load paper here.

  11. Lower paper trays

    Load paper here.

Front and right view

Main unit illustration numbered callout illustration

  1. ADF's extender

    Pull this extender to support large paper.

  2. Right tray

    Printed paper is delivered here.

  3. Upper right cover

    Open this cover when a paper jam occurs.

  4. Duplex unit

    Open this cover when a paper jam occurs.

  5. Tray 2 right cover

    Open this cover when a paper jam occurs.

  6. Lower right cover

    Open this cover when a paper jam occurs.

  7. Paper guides

    When loading paper in the bypass tray, align the paper guides flush against the paper.

  8. Bypass tray

    Use to copy or print on OHP transparencies, adhesive labels, and paper that cannot be loaded in the paper trays.

  9. Extender

    Pull this extender out when loading A4, 81/2 × 11 or larger size paper in the bypass tray.

Rear and left view

Main unit illustration numbered callout illustration

  1. Vents

    Prevent overheating.