Previous
This section describes the user tools in the Stamp Text menu under [Stamp].
Font
You can select the font in Stamp Text mode.
Default: [Font 1]
Size
You can select the stamp text size.
Default: [Auto]
Superimpose
You can have the stamp text printed in white when it overlaps black parts of the image.
Default: [Off]
Stamp Color
Select the priority color when printing the text.
Default: [Black]
Stamp Setting
Specify how stamp text is printed.
Stamp Position
Specify where to print the Stamp Text. For details about the stamp position, see Stamps.
Default: [Top Right]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe)Stamp positions
Default
Possible range
Top Left
32 mm from the left edge
8 mm from the top edge
From 5 to 118 mm from the left edge
From 5 to 118 mm from the top edge
Top Center
Center
8 mm from the top edge
From 0 to 59 mm to the right or left of the center
From 5 to 118 mm from the top edge
Top Right
12 mm from the right edge
8 mm from the top edge
From 5 to 118 mm from the right edge
From 5 to 118 mm from the top edge
Bottom Left
32 mm from the left edge
8 mm from the bottom edge
From 5 to 118 mm from the left edge
From 5 to 118 mm from the bottom edge
Bottom Center
Center
8 mm from the bottom edge
From 0 to 59 mm to the right or left of the center
From 5 to 118 mm from the bottom edge
Bottom Right
12 mm from the right edge
8 mm from the bottom edge
From 5 to 118 mm from the right edge
From 5 to 118 mm from the bottom edge
(mainly North America)Stamp positions
Default
Possible range
Top Left
1.3 inches from the left edge
0.3 inches from the top edge
From 0.2 to 4.6 inches from the left edge
From 0.2 to 4.6 inches from the top edge
Top Center
Center
0.3 inches from the top edge
From 0 to 2.3 inches to the right or left of the center
From 0.2 to 4.6 inches from the top edge
Top Right
0.5 inches from the right edge
0.3 inches from the top edge
From 0.2 to 4.6 inches from the right edge
From 0.2 to 4.6 inches from the top edge
Bottom Left
1.3 inches from the left edge
0.3 inches from the bottom edge
From 0.2 to 4.6 inches from the left edge
From 0.2 to 4.6 inches from the bottom edge
Bottom Center
Center
0.3 inches from the bottom edge
From 0 to 2.3 inches to the right or left of the center
From 0.2 to 4.6 inches from the bottom edge
Bottom Right
0.5 inches from the right edge
0.3 inches from the bottom edge
From 0.2 to 4.6 inches from the right edge
From 0.2 to 4.6 inches from the bottom edge
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
Change Job Serial No. for First Job
You can select whether or not to print the serial number after the stamped text. For details about how to specify the setting, see Printing text and serial numbers.
Default: [Off]
For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Connecting the Machine/ System Settings.
