Send / Reception Settings
Device Management > Configuration > Fax >
Send / Reception Settings
Configure settings for Internet Fax transmission and Fax reception.
Note
- Settings on this page can be changed by the following administrators and users:
- Network Administrator (Transmission Settings)
- Machine Administrator (Reception Settings)
- Users logged in to a device that is set to perform user authentication
Users must have normal fax operation rights and permission to change settings that usually only administrators can change.
- Some items may not appear depending on machine type or configuration.
Transmission Settings
Maximum Email Size
Specify whether to limit Internet Fax transmissions according to maximum email size.
When On is selected, specify the maximum email size in Email Size below.
Email Size
Enter the maximum email size in kilobytes (128 to 102400 KB).
IP-Fax TX Route Auto Switch (IP/G3)
Specify whether or not to automatically switch the line to a G3 line and transmit the data if the receiver does not respond to IP-Fax.
IP-Fax Maximum Transmission Speed
Specify the maximum speed (available bandwidth) settings for IP-fax transmission.
Normal
Specify the maximum transmission speed of IP-fax not via Home Gateway.
Enter a value between 128 and 1000 kbps. You must enter a value that is divisible by 8. If the entered value is not divisible by 8, it will be lowered to the highest number that is divisible by 8.
Use Home Gateway
Specify the maximum transmission speed of IP-fax via the Home Gateway.
Reception Settings
Switch Reception Mode
Select the reception mode if using standard G3 line.
Note
- The optional handset or an external telephone is required to use Manual Reception.
Auto Reception
When a call comes in, the device automatically receives it as a fax. Use this setting for dedicated fax lines. If the call is voice, you must manually switch to telephone mode.
Manual Reception
When a call comes in, the device rings. If the call is a fax, you must manually switch to facsimile mode.
Auto Switch
When a call comes in, the device automatically switches between telephone and facsimile mode according to the caller.
Reception Mode Auto Switch Time
Select the reception mode priority between telephone and facsimile, when Auto Switch is set for Switch Reception Mode.
Telephone Priority
Switches to facsimile mode after the specified number of rings, whether the call is voice or fax.
The number of rings can be set in the Number of Rings (Telephone Priority) box.
Fax Priority
If the call is a fax, the device receives it automatically.
If the call is voice, the device switches to facsimile mode after the specified number of rings.
The number of rings can be set in the Number of Recalls (Fax Priority) box.
Number of Rings (Telephone Priority)
Enter the number of rings when Telephone Priority is selected for Reception Mode Auto Switch Time. Enter a number between 1 and 29.
Number of Recalls (Fax Priority)
Enter the number of rings when Fax Priority is selected for Reception Mode Auto Switch Time. Enter a number between 1 and 29.
SMTP RX File Delivery Settings
Specify whether to deliver files received on an SMTP server using a fax line.
When On is selected, specify the authorized email address in Authorized Email Address below.
Note
- SMTP server settings can be configured on the Configuration: Device Settings: Email page.
Authorized Email Address
Enter an email address.
Up to 128 alphanumeric characters can be entered.
Files sent from the email address entered here are delivered.
For example, if you specify "@xyz.co.jp", email sent from addresses such as "abc@xyz.co.jp" or "def@xyz.co.jp" will be delivered.
Email sent from addresses that do not match the setting, for example "abc@xyz2.co.jp", will not be delivered.
Note
- When email is received from an email address that does not match the email addresses specified here, the email is deleted and an error message returned to the SMTP server. An error report is not produced even if the email is deleted.
Encryption
Specify whether or not to encrypt fax-received data when sending it to an email address.
Signature
Specify whether or not to apply a digital signature when sending fax-received data to an email address.
2 Sided Print
Specify whether to duplex print fax-received data.
Note
- To initiate duplex printing, all pages of received data must be the same size. Also, paper of the same size as the received data must be loaded in the machine.
Checkered Mark
Specify whether to print a checkered mark on the first page of fax messages to help you separate multiple jobs.
Center Mark
Specify whether to print a center mark on fax messages, lists, and reports. The center mark position can be Center of Left Edge or Center of Top Edge of the paper.
Print Reception Time
Specify whether to print the time of receipt on fax messages. The print position is the bottom edge of the paper.
Reception File Print Quantity
Enter the number of copies you want to print. You can enter a number between 1 and 10 (copies).
Paper Tray
Select a paper tray for printing fax-received data.
Memory Lock Reception
Specify whether to use memory lock reception.
If memory lock reception is enabled, incoming faxes are stored in memory and do not print automatically.
You need to enter a memory lock ID to print them.
To enable memory lock reception, you must first enter the ID in the Program Memory Lock ID box on the Configuration: Fax: Initial Settings page.
Buttons
Refresh
Click to update the currently displayed information.
Note
- Before making the settings, click Refresh to obtain the machine's current status.
OK
Click to apply the settings.
Cancel
Click to cancel the settings.