LDAP Server (Setup)
Configuration > Device Settings >
LDAP Server > LDAP Server (Setup)
Register and update LDAP servers.
Note
- Settings on this page can be changed by the following Administrator:
- Machine Administrator
Identification Name
Enter the LDAP server's name using up to 20 characters.
Server Name
Enter the LDAP server's host name or IP address using up to 128 characters.
Search Base
Enter the position within the LDAP directory's structure from which to start user searches.
Use up to 128 alphanumeric characters.
Example: dc=my-domain.com
Port Number
Enter the port number used to connect to the LDAP server. Use a number from 1 to 65535. The default is 389.
SSL
Select whether or not to use SSL to communicate with the LDAP server. If you select "On", communication between machine and LDAP server is SSL encrypted. If you select "Off", communication is not encrypted.
Note
- To apply SSL encryption, a device certificate must be installed in the device.
- This setting is reflected in the [Port Number] box. When [On] is selected, [Port Number] is set to "636", and when [Off] is selected, [Port Number] is set to "389".
Authentication
Select to perform authentication when the machine connects to the LDAP server.
Off
No authentication.
Cleartext Authentication
User name and password authentication.
Digest Authentication
User name, password, and device certification authentication.
Kerberos Authentication
User name, password, and device certification authentication.
Realm Name
If you selected "Kerberos Authentication" for [Authentication], you must specify the Kerberos realm for user authentication.
Note
- The realm name must be preset on the [Configuration] - [Device Settings] - [Program/Change Realm] page.
Japanese Character Code Set
Select a character code set for the LDAP server to use.
Connection Test
Click [Start] to see whether or not connection to the LDAP server is possible using the settings made.
Search Conditions
Specify which item of user information to search for via LDAP search.
Identification Name
Enter an attribute type by which the user name can be distinguished.
Use up to 64 alphanumeric characters.
Default: "cn".
Buttons
[OK]
Saves settings and returns the [LDAP Server] page. In the [LDAP Server] page, click [Apply] to apply the settings to the machine.
[Cancel]
Click to cancel the settings and return to the [LDAP Server] page.