Interface Settings
Configuration > Interface >
Interface Settings
Use this page to enter administrative information related to the machine's interfaces.
Some items are for reference only and cannot be changed.
To make settings for the wireless LAN board, use the [Wireless LAN Settings] page.
Note
- Settings on this page can be changed by the following Administrators:
- Network Administrator (LAN Type, Ethernet, and Bluetooth)
- Machine Administrator (USB, USB Host, PictBridge, and Parallel Interface)
LAN Type
Switch the interface between Ethernet and wireless LAN. This is available only if the device supports both interfaces.
Note
- When "Ethernet" is in use, the switching option is not available.
Ethernet
Displays network interface board information. This information appears when a network interface board is installed.
Network
Displays Ethernet operation status.
MAC Address
Displays the MAC address (Media Access Control Address) of the network interface board.
Ethernet Security
Select whether or not to use IEEE 802.1X as an authentication method to protect data communication.
To make detailed settings, use the [IEEE 802.1X (WPA/WPA2)] page.
Bluetooth
Configure settings related to the Bluetooth board. This information appears when a Bluetooth board is installed.
Bluetooth
Select whether communication using Bluetooth is active or inactive.
Operation Mode
Select the Bluetooth operation mode.
Public
You can establish the connection by searching for a Bluetooth adaptor or Bluetooth-equipped computer.
Private
You can establish the connection when registering the machine with utility. A Bluetooth adaptor or Bluetooth-equipped computer that has not registered the machine cannot be searched for.
USB
Configure USB settings.
USB
Select whether data transfer via USB is active or inactive.
USB Host
This appears when data transfer via USB is active and the device supports USB Host.
USB Host
Select whether USB Host function is active or inactive.
PictBridge
Configure PictBridge settings.
PictBridge is the standard that enables images to be printed by connecting a device directly to a digital camera via USB cable.
The following item appears when the device supports PictBridge:
PictBridge
Select to enable or disable communication using PictBridge.
Parallel Interface
Configure settings related to the parallel interface board. This information appears when a parallel interface board is installed.
Parallel Interface
- Parallel Interface Select whether to enable or disable printing using the parallel interface.
Parallel Timing
Select the parallel interface timing.
Parallel Communication Speed
Select the parallel interface communication speed.
Selection Signal Status
Select the selection signal level for the parallel interface.
Input Prime
Select whether to enable or disable the input prime signal when the signal is received.
Bidirectional Communication
Select whether to enable or disable bidirectional communication on the device.
Buttons
[Refresh]
Click to update the currently displayed information.
Note
- Before making the settings, click [Refresh] to obtain the machine's current status.
[OK]
Click to apply the settings.
[Cancel]
Click to cancel the settings.