Machine: Image Position
For details about the following items, see Machine: Image Position.
No. |
Item |
Description |
---|---|---|
0101 |
Image Position: Across Feed: Side 1 |
Adjust the image position (up and down) on side 1 across the feeding direction. |
0102 |
Image Position: Across Feed: Side 2 |
Adjust the image position (up and down) on side 2 across the feeding direction. |
0103 |
Image Position: With Feed: Side 1 |
Adjust the image position (left and right) on side 1 along the feeding direction. |
0104 |
Image Position: With Feed: Side 2 |
Adjust the image position (left and right) on side 2 along the feeding direction. |
0105 |
Perpendicularity Adjustment |
Adjust the image skew (perpendicularity) across the feeding direction. |
0106*1 |
Switch Paper Edge Detection Sensor |
Specify the level for detecting the paper edge for correcting the image position along the feeding direction. |
*1 This item cannot be specified for Type 1 (Pro C7200SL only).
Machine: Image Quality
For details about the following items, see Machine: Image Quality.
No. |
Item |
Description |
---|---|---|
0201 |
Execute Image Quality Adjustment |
Execute image control or color registration adjustment manually. |
0202 |
Maximum Image Density |
Adjust the toner adhesion amount to the intermediate transfer belt during the image density adjustment. |
0203 |
Line Width |
Adjust the intensity of the laser for rasterizing the image data. |
0204 |
Density Difference: Across Feed |
Adjust the vertical density deviation of images in the direction perpendicular to the paper feed direction. |
Machine: Paper Feed/ Output
For details about the following items, see Machine: Paper Feed/ Output.
No. |
Item |
Description |
---|---|---|
0301 |
3-Tray LCIT: Fan Setting |
Specify the fan operation of the 3-Tray LCIT. |
0302 |
3-Tray LCIT: Fan Volume Setting |
Adjust the fan volume for the 3-Tray LCIT to separate sheets of paper in close contact. |
0303 |
Pickup Assist Setting |
Specify the operation of the Paper Feed Roller in the trays of the main unit, bypass tray, and 3-tray LCIT. |
0304 |
Correct Output Paper Curl |
Specify the method for straightening curled sheets. Select the method according to the direction and degree of curl. |
0305 |
Detect JAM099 |
Specify whether or not to detect double feed (multi-sheet feeding). This setting is invalid when you are printing from the tray for which custom paper is allocated. |
0306 |
Detect JAM080 |
Specify whether or not to detect error as a paper jam when the image deviation in the feeding direction exceeds a certain degree. |
0307 |
Detect/Control JAM097/098 |
Specify whether or not to correct the image position and skew in the vertical direction when a deviation in the direction is detected. |
0308 |
Detect JAM048 |
Specify whether or not to detect an error as a paper jam when a problem is detected while the registration mark is checked for image position correction. |
0310 |
ADF Adjustment |
Adjust the image position and scaling factor when scanning originals on the Auto Document Feeder (ADF). You can correct the discrepancy, stretching, and shrinkage of originals caused by deviation during the feeding process. |
0311 |
Buffer Pass Unit Fan Activation Setting |
Select the condition for activating the fan in the Cool Feeding Unit. When the fan stops, the mechanical noise is lower. |
Machine: Maintenance
For details about the following items, see Machine: Maintenance.
No. |
Item |
Description |
---|---|---|
0501 |
Execute Process Adjustment |
Execute the following adjustments for printing at once:
|
0502 |
Screw-on Cap to Replace |
Close the Toner Bottle Cap. Open the toner bottle cover (the cover of the toner dispensing section) before executing this function. Afterward, remove the toner bottle by pushing the knob below the bottle. |
0503 |
Execute Developer Refreshing |
Cleans the Charge Roller. |
0506 |
Execute Charge Roller Cleaning |
Replace some of the liquid developer in the development unit. |
0508 |
Manually Smooth Fusing Belt |
Smoothe the Fusing Belt manually. |
0509 |
Fusing Belt Manual Smoothing Adjustment |
Set the conditions for manual Fusing Belt smoothing. |
0510 |
Fusing Belt Auto Smoothing Setting |
Set the conditions for automatic Fusing Belt smoothing. |
0511 |
Fusing Belt Smoothing Adjustment |
Set the conditions for automatic Fusing Belt smoothing. |
0512 |
Fuser Unit Speed Adjustment |
Correct the deviation in the rotation speed of the Fuser Unit. |
0514 |
Temperature / Humidity Inside |
Display the internal temperature and humidity. |
0515 |
Temperature / Humidity Outside |
Display the external temperature and humidity. |
0517 |
Switch Print Screen |
Select the mode that appears when [To Print Screen] is pressed: copier mode or printer mode. |
0519 |
Display Parts Life Counter |
Display the usage rate of the spare parts. |
Finishing: Finisher
For details about the following items, see Finishing: Finisher.
No. |
Item |
Description |
---|---|---|
0601 |
Staple Position: Across Feed 1 |
Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5050 or Booklet Finisher SR5060. |
0602 |
Staple Position: Across Feed 2 |
Adjust the vertical distance (up and down) between the staples (dual) when using Finisher SR5050 or Booklet Finisher SR5060. |
0603 |
Staple Position: With Feed |
Adjust the horizontal position of the staples when using Finisher SR5050 or Booklet Finisher SR5060. |
0604 |
Paper Alignment for Stapling: Across Feed |
Adjust the width of the Staple Jogger*1 when using the staple function on Finisher SR5050 or Booklet Finisher SR5060. |
0605 |
Paper Alignment for Stapling: With Feed |
Adjust the Tip Stopper movement when using the staple function applied at an angle on Finisher SR5050 or Booklet Finisher SR5060. |
0606 |
Number of Sheets Align for Stapling |
Specify the number of sheets to align for stapling at one time. |
0607 |
Punch Position: Across Feed |
Adjust the vertical position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060. |
0608 |
Punch Position: With Feed |
Adjust the horizontal position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060. |
0609 |
Punch Skew Correction |
Specify whether or not to correct the punch skew when using Finisher SR5050 or Booklet Finisher SR5060. |
0610 |
Amount of Punch Skew Correction |
Adjust the level of skew correction when using Finisher SR5050 or Booklet Finisher SR5060. |
0611 |
Paper Alignment in Shift Tray Setting |
Specify the alignment precision of output sheets during Shift Sorting when using Finisher SR5050 or Booklet Finisher SR5060. |
0612 |
Paper Alignment in Shift Tray: Across Feed |
Adjust the width of Paper Alignment Jogger*1 on the Shift Tray when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060. |
0613 |
Output Tray Descending Position |
Specify the tray descent range according to the paper weight when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060. |
0614 |
Exit Guide Close Timing |
Specify the timing to close the Paper Exit Guide when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060. |
0615 |
Output Trail Edge Press Setting |
Specify whether or not to hold the trailing edge of sheets when they are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060. |
0616 |
Output Fan Setting |
Specify the fan operation to the sheets on the Shift Tray when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060. |
0617 |
Output Fan Level |
Specify the air flow of the fan on the Shift Tray when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060. |
0618 |
Staple Position for Booklet |
Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5060. |
0619 |
Folding Position for Booklet |
Adjust the horizontal position of the folding when using Booklet Finisher SR5060. |
0620 |
Paper Alignment for Booklet: Across Feed |
Adjust the width of the Staple Jogger*1 when using Booklet Finisher SR5060. |
0621 |
Set Number of Folds for Booklet |
Specify the number of booklet folds to be performed when using Booklet Finisher SR5060. |
0622 |
Paper Alignment for Booklet: With Feed |
Adjust the Tip Stopper movement when using the booklet binding function on Booklet Finisher SR5060. |
0623 |
Z-fold Skew Correction |
Select the method to correct the skew during Z-folding on the fold unit. |
0624 |
Amount of Z-fold Skew Correction |
Adjust the striking amount of paper during Z-folding skew correction. |
0625 |
Amount of Z-fold Skew Correction: Reverse |
Adjust the reverse rotation amount of Registration Roller during Z-folding skew correction. |
0626 |
Maximum No. Stacked Sheets in Output Tray |
Specify the number of sheets to stack on the Shift Tray at the time of shift sorting. |
0630 |
Staple Position for Booklet |
Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5120. |
0631 |
Folding Position for Booklet |
Adjust the horizontal position of the folding when using Booklet Finisher SR5120. |
0632 |
Staple Position: Across Feed 1 |
Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5110 or Booklet Finisher SR5120. |
0633 |
Staple Position: Across Feed 2 |
Adjust the vertical distance (up and down) between the staples (dual) when using Finisher SR5110 or Booklet Finisher SR5120. |
0634 |
Staple Position: With Feed |
Adjust the horizontal position of the staples when using Finisher SR5110 or Booklet Finisher SR5120. |
0635 |
Punch Position: Across Feed |
Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120. |
0636 |
Punch Position: With Feed |
Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120. |
0638 |
Set Number of Folds for Booklet |
Specify the number of booklet folds to be performed when using Booklet Finisher SR5120. |
0666 |
Staple Tray: Rib Installed Mode to Strengthen Paper |
Set the operation when the Paper Strengthening Rib is installed to Staple Tray when using Finisher SR5110 or Booklet Finisher SR5120. |
0667 |
Accuracy Priority for Stapling |
Set the accuracy priority for stapling when using Finisher SR5110 or Booklet Finisher SR5120. |
0668 |
Accuracy Priority for Booklet |
Set the accuracy priority for a when using Booklet Finisher SR5120. |
*1 A guide for aligning output sheets. Paper is aligned at both ends.
Finishing: Fold
For details about the following items, see Finishing: Fold.
No. |
Item |
Description |
---|---|---|
0701 |
Z-fold Position 1 |
Adjust the fold position of the end segment when using the fold unit. |
0702 |
Z-fold Position 2 |
Adjust the overall fold size of the Z-foldout sheets when using the fold unit. |
0703 |
Half Fold Position: 1 sheet Fold |
Adjust the edge width of the half folded sheets (1 sheet fold) when using the fold unit. |
0704 |
Half Fold Position: Multi-sheet Fold |
Adjust the edge width of the half folded sheets (multi-sheet fold) when using the fold unit. |
0705 |
Letter Fold-out Position 1: 1 sheet Fold |
Adjust the fold position of the bottom segment of letter foldout sheets (1 sheet fold) when using the fold unit. |
0706 |
Letter Fold-out Position 1: Multi-sheet Fold |
Adjust the fold position of the bottom segment of letter foldout sheets (multi-sheet fold) when using the fold unit. |
0707 |
Letter Fold-out Position 2: 1 sheet Fold |
Adjust the overall fold size of letter foldout sheets (1 sheet fold) when using the fold unit. |
0708 |
Letter Fold-out Position 2: Multi-sheet Fold |
Adjust the overall fold size of letter foldout sheets (multi-sheet fold) when using the fold unit. |
0709 |
Letter Fold-in Position 1: 1 sheet Fold |
Adjust the fold position of the bottom segment of letter fold-in sheets (1 sheet fold) when using the fold unit. |
0710 |
Letter Fold-in Position 1: Multi-sheet Fold |
Adjust the fold position of the bottom segment of letter fold-in sheets (multi-sheet fold) when using the fold unit. |
0711 |
Letter Fold-in Position 2: 1 sheet Fold |
Adjust the fold size of letter fold-in sheets (1 sheet fold) when using the fold unit. |
0712 |
Letter Fold-in Position 2: Multi-sheet Fold |
Adjust the fold size when Inside 3 Folding is executed (Overlap Folding) when using the fold unit. |
0713 |
Double Parallel Fold Position 1 |
Adjust the fold position of the bottom segment 1 of double parallel-folded sheets when using the fold unit. |
0714 |
Double Parallel Fold Position 2 |
Adjust the fold position of the bottom segment 2 of double parallel-folded sheets when using the fold unit. |
0715 |
Gate Fold Position 1 |
Adjust the fold position of the bottom segment 1 of gatefold sheets when using the fold unit. |
0716 |
Gate Fold Position 2 |
Adjust the fold position of the bottom segment 2 of gatefold sheets when using the fold unit. |
0717 |
Gate Fold Position 3 |
Adjust the fold position of the bottom segment 3 of gatefold sheets when using the fold unit. |
Finishing: Perfect Binder
For details about the following items, see Finishing: Perfect Binder.
No. |
Item |
Description |
---|---|---|
0801 |
Perf Bind Cvr Sht Posit: Across Feed |
Adjust the vertical alignment of the cover sheet position when performing perfect binding. |
0802 |
Perf Bind Cvr Sht Posit: With Feed |
Adjust the horizontal alignment of the cover sheet position when performing perfect binding. |
0803 |
Perfect Binding Finishing Angle |
Square the top, bottom, and outside edges when trimming a deck of paper. |
0804 |
Applying Binding Glue |
Adjust the amount of binding glue for perfect binding. |
Finishing: Stacker
For details about the following items, see Finishing: Stacker.
No. |
Item |
Description |
---|---|---|
0901 |
Ppr Align in Stack Tray: Acr Feed 1 |
Adjust the alignment width in Main Jogger*1 when output sheets are stacked on the stacker. |
0902 |
Ppr Align in Stack Tray: Acr Feed 2 |
Adjust the alignment width in Sub Jogger*1 when output sheets are stacked on the stacker. |
0903 |
Paper Alignment in Stacker Tray: With Feed |
Adjust the alignment position of the Tip Stopper when output sheets are ejected on the Stacker. |
0904 |
Ppr Align in 2nd Stack Tray: Acr Feed 1 |
Adjust the alignment width in Main Jogger*1 when output sheets are stacked on the 2nd stacker. |
0905 |
Ppr Align in 2nd Stack Tray: Acr Feed 2 |
Adjust the alignment width in Sub Jogger*1 when output sheets are stacked on the 2nd stacker. |
0906 |
Ppr Align in 2nd Stack Tray: With Feed |
Adjust the alignment position of the Tip Stopper when output sheets are ejected on the 2nd stacker. |
0907 |
Maximum Stack Quantity in Stacker Tray |
Specify the maximum number of sheets that can be stacked on the stacker tray. The setting applies to both the 1st and 2nd stackers. |
*1 A guide for aligning output sheets. Paper is aligned at both ends.
Density Difference Printing: Across Feed
For details about the following items, see Density Difference Printing: Across Feed.
No. |
Item |
Description |
---|---|---|
1001 |
Density Difference Printing: Across Feed |
To reduce image density diff. |
Finishing: Interposer
For details about the following items, see Finishing: Interposer.
No. |
Item |
Description |
---|---|---|
2101 |
Detect JAM573 |
Set ON / OFF for JAM573 (detection of multi feed). |
2101 |
Detect JAM574 |
Set ON / OFF for JAM574 (detection of multi feed). |
2102 |
Interposer Fan Setting |
Set the fan operation for Interposer. |
2103 |
Interposer Fan Level |
Adjust the correction value for the standard value of the interposer fan level. |