This section explains precautions when adding toner, how to send scanned documents when the toner has run out, and how to dispose of used toner.
|
|
|
|
|
|
|
|
|
|
|
|
Always replace the toner cartridge when a notification appears on the machine.
Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the main power. If you do, settings will be lost.
Store toner where it will not be exposed to direct sunlight, temperatures above 35°C (95°F), or high humidity.
Store toner horizontally.
Do not shake the toner cartridge with its mouth down after removing it. Residual toner may scatter.
Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
Follow the instruction on the control panel regarding how to replace a toner cartridge.
If “Toner Cartridge is almost empty.” appears, the toner has almost run out. Have a replacement toner cartridge at hand.
You can check the name of the required toner and the replacement procedure using the [Add Toner] screen.
For details about how to check contact number where you can order supplies, see Inquiry
If appears when there is still toner in the cartridge, hold the cartridge with the opening upward, shake it well, and then reinstall it.
You can add all four color toners in the same way.
Close the upper right front cover after replacing the toner bottle. Replenishing the toner will not start until the upper right front cover is closed. Also, if the toner runs out while the upper right front cover is open, close it first, and then open the cover to remove the toner bottle. Keep the upper right front cover closed except when replacing the toner bottle.