Previous
Specify whether or not to enable the mode to reduce the jitter*1 produced when paper enters the paper transfer roller.
If "1" is selected, the machine adjusts the interval between sheets to reduce jitter. However, the throughput may be reduced when you use paper larger than A4
or 81/2 × 14. If this happens, turn this setting off to improve the throughput.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
|---|---|---|---|---|---|
Setting |
0 |
1 |
0 |
1 |
– |
*1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is transmitted to the drum unit via the intermediate transfer belt, causing banding.
Jitter does not occur with A4
, 81/2 × 14 or smaller paper.This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Avoid Paper Transfer Shock Jitter: Feed Interval] in "Advanced Settings" takes precedence.
