Energy Saving Functions
Low Power Mode
If this machine remains idle for a specified period, it automatically reduces its electrical consumption.
The default period the machine waits before entering Low Power Mode is one minute. This default time can be changed.
Sleep Mode
If this machine remains idle for a specified period of time or when [Energy Save] (
) is pressed, it enters Sleep mode to further reduce its electrical consumption. This is called "Sleep Mode".The default delay time the machine waits before entering Sleep mode is 14 minutes.
The machine can print jobs from computers while in Sleep mode.
Specification
(mainly Europe and Asia)
Specification | |
|---|---|
Reduced electrical consumption in Low Power mode *1 | 32.0 W |
Time of switch into Low Power mode | 1 minute |
Time of switch out from Low Power mode *1 | 3.1 seconds |
Reduced electrical consumption in Sleep mode *1 | 0.70 W |
Time of switch into Sleep mode | 14 minutes |
Time of switch out from Sleep mode *1 | 5.5 seconds |
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ depending on the conditions and environment of the machine.
(mainly North America)
Specification | |
|---|---|
Reduced electrical consumption in Low Power mode *1 | 31.1 W |
Time of switch into Low Power mode | 1 minute |
Time of switch out from Low Power mode *1 | 2.5 seconds |
Reduced electrical consumption in Sleep mode *1 | 0.64 W |
Time of switch into Sleep mode | 14 minutes |
Time of switch out from Sleep mode *1 | 6.2 seconds |
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ depending on the conditions and environment of the machine.
You can change the amount of time that the machine waits before entering Sleep mode under [Sleep Mode Timer].
You can change the amount of time that the machine waits before entering Low Power mode under [Low Power Mode Timer].
The machine enters sleep mode directly in the following situations:
[Low Power Mode Timer] and [Sleep Mode Timer] are set to the same time
[Sleep Mode Timer] is set shorter than [Low Power Mode Timer]
It may take longer than the specified time to enter Sleep mode according to the type of Embedded Software Architecture application installed in the machine.