Emulation (EM)
This section describes the settings in [Emulation (EM)] under [Printer Settings]
Setting Items | Description |
|---|---|
Blank Page Print (Applicable emulation: RPGL/GL2) | You can specify whether to eject paper when the paper eject command is received and there is no data to print. When [Space] is selected, paper is ejected in the event that a space code (20H, A0H, or 8140H) is received before the paper eject command. In the event that any other codes are received, no paper is ejected.
|
Feed Timeout (Applicable emulation: RPGL/GL2) | You can specify whether to force the machine to print the data stored on the machine when no data is received from a computer for a certain period of time. To force the machine to print the data, specify the time period (10 to 300 seconds) to hold the printing process when no data is received. If data transmission is interrupted for longer than the specified time period, part of the data will be printed on a different sheet of paper.
|
Custom Size: Paper Input Location 1 Custom Size: Paper Input Location 2 (Applicable emulation: RPGL/GL2, RTIFF (TIFFDP)) | You can specify a custom size for the paper input locations 1 and 2. Specify a horizontal dimension within the range of 279.4 to 914.4 mm (11.00 to 36.00 inches) and a vertical dimension within the range of 210.0 to 33000.0 mm (8.27 to 1299.21 inches). [Paper Input Location 2] appears when an optional Roll Unit RU6570 is installed.
|
(mainly Europe and Asia)
(mainly North America)