Paper Input Location/Paper Settings

This section describes the settings in [Paper Input Location/Paper Settings].

Paper Size/Paper Type

Important

If the specified paper size differs from the actual size of the paper loaded in the paper input location, a misfeed might occur because the correct paper size was not detected.

Setting Items	Description
Paper Bypass Location	Paper Size: Printer	Specify the size of the paper loaded in the paper bypass location. This setting is applied when printing with the printer driver. (mainly Europe and Asia) Default: [A4] (mainly North America) Default: [8¹/₂×11]
Paper Bypass Location	Paper Type/Thickness	Specify the type and weight of the paper loaded in the paper bypass location. Default Paper Type: [Plain Paper] Paper Thickness: [80-94 gsm (Plain Paper)]
Paper Input Location 1 Paper Input Location 2	Paper Size	Specify the size of the paper loaded in the paper input location. Default: [Auto Detect]
	Paper Type/Thickness	Specify the type and weight of the paper loaded in the paper input location. Default Paper Type: [Plain Paper] Paper Thickness: [80-94 gsm (Plain Paper)]
	Apply Auto Paper Select/Auto Paper Input Location Select	Specify whether to apply Auto Paper Select. Default: (Yes)

Paper Input Priority

Setting Items	Description
Paper Input Priority: Copier Paper Input Priority: Printer	If multiple locations are listed for Auto Paper Select, specify which paper input location is used first. Specify the paper input location to be used first for Copier or Printer. Default Paper Input Priority: Copier: [Paper Input Location 1] Paper Input Priority: Printer: [Paper Input Location 1]

Setting Items

Description

Paper Input Priority: Copier

Paper Input Priority: Printer

If multiple locations are listed for Auto Paper Select, specify which paper input location is used first.

Specify the paper input location to be used first for Copier or Printer.

Default
- Paper Input Priority: Copier: [Paper Input Location 1]
- Paper Input Priority: Printer: [Paper Input Location 1]

Common Settings/Others

Setting Items	Description
Sheet-dry Print Delay	Specify the time period for drying printed paper to prevent image contamination due to undried ink. Default Plain Paper: [0 sec] Recycled Paper: [0 sec] Inkjet Plain: [0 sec] Translucent Paper: [15 sec] Film (Matte): B & W: [0 sec] Film (Matte): Color: [15 sec] Coated (CAD): [0 sec] Coated Paper: [0 sec] Special Paper: [0 sec]
Auto Paper Feed	Specify whether to automatically feed paper from a paper roll. Default: [Active]

Copy

Setting Items	Description
Auto Tray Switching	As long as paper of the same size and type is loaded in another paper input location, paper is fed from the other paper input location when the first paper input location runs out of paper (Auto Tray Switching). To enable Auto Tray Switching only when paper of the same size and type is loaded in the same orientation, select [Without Image Rotation]. Default: [With Image Rotation]
Paper Settings Screen for Bypass	You can specify whether to display the Paper Setting screen for the paper bypass location when you select the paper bypass location in [Paper Input Location/Paper Settings][Paper Size/Paper Type]. Default: [Display Automatically]

Setting Items

Description

Auto Tray Switching

As long as paper of the same size and type is loaded in another paper input location, paper is fed from the other paper input location when the first paper input location runs out of paper (Auto Tray Switching).

To enable Auto Tray Switching only when paper of the same size and type is loaded in the same orientation, select [Without Image Rotation].

Default: [With Image Rotation]

Paper Settings Screen for Bypass

You can specify whether to display the Paper Setting screen for the paper bypass location when you select the paper bypass location in [Paper Input Location/Paper Settings][Paper Size/Paper Type].

Default: [Display Automatically]

Printer

Setting Items	Description
Sub Paper Size	You can specify whether A4 and 8¹/₂ × 11 paper is treated as the same size. Default: [Auto]
Paper Input Location Switching	This is the setting item to specify when you print by specifying the paper input location on the printer driver. You can specify whether to allow automatic paper selection when the paper loaded in the paper input location is different from the settings specified on the printer driver. When paper of the same size and type is loaded in another paper input location, paper is fed from the paper input location. Default: [Off]
Extended Auto Paper Input Switching	This is the setting item to specify when you print by specifying the paper input location. You can specify whether to use paper of the same size and type loaded in another paper input location when the designated paper input location runs out of paper. If Auto Paper Input Switching for the print settings of emulation is disabled, printing continues by Auto Paper Input Switching. Default: [Off]

Setting Items

Description

Sub Paper Size

You can specify whether A4 and 8¹/₂ × 11 paper is treated as the same size.

Default: [Auto]

Paper Input Location Switching

This is the setting item to specify when you print by specifying the paper input location on the printer driver. You can specify whether to allow automatic paper selection when the paper loaded in the paper input location is different from the settings specified on the printer driver. When paper of the same size and type is loaded in another paper input location, paper is fed from the paper input location.

Default: [Off]

Extended Auto Paper Input Switching

This is the setting item to specify when you print by specifying the paper input location. You can specify whether to use paper of the same size and type loaded in another paper input location when the designated paper input location runs out of paper.

If Auto Paper Input Switching for the print settings of emulation is disabled, printing continues by Auto Paper Input Switching.

Default: [Off]