System

Print Error Report

You can specify whether to have an error report printed when a printer or memory error occurs.

Auto Continue

When the paper specified on the printer driver is not set in the machine, you can specify whether the machine continues to print onto paper that has not been specified after a system error occurs (Forced Printing).

When you specify [Immediate], forced printing starts. You can display the dialog for confirming whether to continue printing and specify to wait for a specified period of time (1 to 15 minutes).

Depending on the machine settings, printing is canceled, and Forced Printing does not start. The results of Forced Printing cannot be guaranteed.

Store and Skip Errored Job

You can specify whether to store an error job in the machine and to print the next job. Normal Print, Sample Print, and Stored Print jobs can be stored in the machine when an error occurs. To activate this setting, specify the number of pages of the error job that the machine verifies when printing starts (1 to 999 pages). A large number of pages require time to start printing. If an error occurs after printing starts, the next job will not be printed.

Memory Overflow

When the sent data size is too large to process in the machine, you can specify whether to stop printing at the error page (Do not Print) or to continue printing.

To continue printing, release the sort function, and print the error information last.

Error Display Setting

You can specify whether to display all print errors on the control panel. When you specify [Only Important Ones], some print errors are displayed.

Auto Cancel Confirmation for PDL Error Job

You can specify whether to cancel printing and display the confirmation screen when an error occurs because of restrictions related to the printer language, options, or security settings.

Sub Paper Size

You can specify whether A4 and 8¹/₂ × 11 paper is treated as the same size.

Paper Input Location Switching

This is the setting item to specify when you print by specifying the paper input location on the printer driver. You can specify whether to allow automatic paper selection when the paper loaded in the paper input location is different from the settings specified on the printer driver. When paper of the same size and type is loaded in another paper input location, paper is fed from the paper input location.

Extended Auto Paper Input Switching

This is the setting item to specify when you print by specifying the paper input location. You can specify whether to use paper of the same size and type loaded in another paper input location when the designated paper input location runs out of paper.

If Auto Paper Input Switching for the print settings of emulation is disabled, printing continues by Auto Paper Input Switching.

Printer Language

Specify the printer language.

Default Printer Language

You can specify the printer language to be used when the machine fails to detect the printer language.

Print Compressed Data

You can specify whether to uncompress and extract job data compressed in the GZIP format before printing.

Copies

You can specify the number of copies when printing without using the printer driver.

Blank Page Print

You can specify whether or not to print blank pages.

Pages that match one of the following conditions are identified as blank.

Edge to Edge Print

You can specify whether to remove trailing, top, or bottom margins when printing a document.

Auto Select Alternate Paper Size to Continue Printing

You can specify whether to automatically select another paper input location that is loaded with paper of a different size for continuous printing when no paper input location loaded with paper of the size specified for printing is found.

When [Active] is specified for [Auto Select Alternate Size to Continue Print Setting], specify Paper Feed Orientation and Image Position as well.

Reserved Job Waiting Time

You can specify how long the machine waits to receive a print job before allowing other functions to interrupt it.