Basic Procedure for Copying Documents
Set the original on the exposure glass or Auto Document Feeder (ADF) to make a copy.
If the previous setting is still active, press [Reset] before copying.
In the following cases, match the printed paper size to the original size. If the size of the paper in the tray is inconsistent with the size of the original, it will not print correctly.
When you print without using [Auto Paper Select] on the paper tray or the Paper Feed Unit
When you print by feeding paper from the bypass tray or LCT
Press [Copy] on the Home screen.
Place the original.
Select the color mode.
Press [+] or [-] in [Quantity] to specify the number of copies.
You can enter this using the number keys after pressing [Quantity] or a number.
Press the paper tray select key to select a paper tray to use.
When you select [Auto Paper Select], the paper suitable for the original is selected automatically. When the orientations of the original and paper in the paper tray do not match, the machine rotates the copied image 90 degrees automatically. However, the copied image may not be rotated depending on the settings or types of Finishing, such as staple.
If the size of the original is not detected properly or when you make a copy on paper of a special size, specify the paper tray in which the paper to use is loaded.
When paper runs out, the machine selects another tray that is loaded with paper of the same size as the setting of the current tray and resumes copying. If you do not want to use other trays when paper runs out, set the machine so it does not automatically select other trays.
To prevent the machine from selecting other trays automatically, disable auto tray switching.
Press [Start].
When the [Check the orientation of the original every time after pressing [Start]] check box is selected in [Select the original's orientation], the screen below is displayed. Select the original orientation as necessary. If you do not need to select this each time, clear the check box.
When you place the original on the ADF, the process of copying the original starts.
When you place the original on the exposure glass, the copy process starts according to the setting contents. To make a copy of the second page or back side of the original, place the original accordingly on the exposure glass, and then press [Start]. Press [Finish Scn] after scanning all originals if necessary according to the setting contents.
Originals scanned when no paper is loaded or when an error has occurred will be copied automatically when the machine is ready to execute copying.